• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.371-373
• /
• 1998

The SmBa$_2$Cu$_3$O$\sub$x/ single crystals were used as seeds to induced YBCO growth in MTG process. As the result, the large bulk oriented YBCO superconductors were prepared with dimension of plane 21mm and 32mm in diameter and 10mm in height. The typical Jc value of the sample is 6.5${\times}$10$^4$A/$\textrm{cm}^2$ and its flux float force is 4.6N/$\textrm{cm}^2$. The oxygen absorption in large bulk textured YBCO samples in pure oxygen was studied at several constant temperatures. It can be divided into two steps: a chemical reaction step and a diffusion step.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권11호
• /
• pp.542-548
• /
• 2000

In this paper, we proposed a new load flow analysis algorithm. In order to develop it, we converted typical power flow problem into optimal problem. This problem has the objective function that minimize the difference between calculated values and specified values of bus powers and subject to bus power equations of P and Q. Using it, we solved the divergence by singularity of Jacobian matrix, the divergence by initial value in the typical power flow study. In the study of a sample system, we verified the superiority of proposed algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.47-49
• /
• 1988

This paper discusses dynamic properties of bubble garnet thin films. The dynamic properties considered are Gilbert damping parameters, saturation velocity, and wall mobility. The parameters are evaluated to facilitate the search for desirable garnet thin film compositions. Given bubble diameter and Q-value, the computer prints out all compositions which meet the desired requirements. The computer model determines magnetization, anisotropy, damping, velocity, mobility among others from the film compositions. The computer modeling program is described by an algorithm detailing its operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.491-493
• /
• 1998

The SmBa$_2$Cu$_3$O$\sub$x/ single crystals were used as seeds to induced YBCO growth in MTG process. As the result, the large bulk oriented YBCO superconductors were prepared with dimension of plane 21mm and 32mm in diameter and 10mm in height. The typical Jc value of the sample is 6.5${\times}$10$^4$A/$\textrm{cm}^2$ and its flux float force is 4.6N/$\textrm{cm}^2$. The oxygen absorption in large bulk textured YBCO samples in pure oxygen was studied at several constant temperatures. It can be divided into two steps: a chemical reaction step and a diffusion step.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.303-306
• /
• 2006

A roll rate estimation method is proposed using the GPS measurement for spinning vehicles such as guided munitions and smart bombs. Before designing the roll rate estimator, the carrier phase and the carrier frequency deviation caused by spinning have been observed. Based on the observation, the spinning frequency is estimated using I and Q value from the correlator. The proposed method is evaluated through computer simulations using a software defined receiver and a GPS IF signal generator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.229-233
• /
• 2000

In this study, the temperature coefficient of resonant frequency($TCF_r$), dielectric and piezoelectric properties of $Pb_{1-x}Sr_x[(Sb_{1/2}Nb_{1/2})_{0.035}(Mn_{1/3}Nb_{2/3})_{0.065}(Zr_{0.49},Ti_{0.51})_{0.90}]O_3$ ceramics were investigated with the Sr substitution to Pb site. The dielectric constant was increased according to the increase of Sr substitution and electromechanical coupling factor($k_t$) also showed the highest values of 0.485 when the Sr substitution was 5 mol%. Moreover, the mechanical quality factor($Q_{mt}$) showed the highest value of 233 when the Sr substitution was 2 mol%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• 한국수산과학회지
• /
• 제28권3호
• /
• pp.253-262
• /
• 1995

현재, 일반적으로 사용되고있는 어육의 선도 측정방법은 소요시간이 많이 걸리는 단점이 있으므로, 신속한 어육의 선도 측정방법으로 마이크로컴퓨터를 이용하는 방법의 실용화에 대하여 검토하였다. 즉, 어체의 전기전도도에 따라서 변하는 값을 실효치변환기(RMS)에서 DC 0-5V로 변환시켜 8096마이크로 프로세서에 내장된 10 비트 분해능의 A/D converter를 거쳐서 디지털 DATA값으로 받아들이도록 고안한 장치를 이용하여, 기존의 물리화학적 선도판정법과 비교 실험하여 다음과 같은 결과를 얻었다. 1. 사후 경직의 개시 시간은 $-3^{\circ}C$에서 4시간, $0^{\circ}C$에서 8시간, $5^{\circ}C$에서 10시간, 그리고 $10^{\circ}C$에서 14시간으로 저장 온도가 높을 수록 연장되었으며, 또 저장 온도가 낮을 수록 경직도가 높았고 완전 경직의 유지시간도 길었다. 2. 신선도 지표인 K값이 횟감으로 이용 가능한 $20\%$에 도달하는 시간은 저장 온도별로 $25^{\circ}C$ 4시간, $10^{\circ}C$ 22시간, $5^{\circ}C$ 71시간, $0^{\circ}C$ 96시간, 그리고 $-3^{\circ}C$ 240시간으로, 저장 온도가 낮을 수록 신선도 저하가 억제되었다. 3. 어류의 초기부패로 알려져 있는 VBN함량 $30mg\%$에 도달하는 데 걸리는 시간이 $-3^{\circ}C$에서 792시간, $0^{\circ}C$에서 576시간, $5^{\circ}C$에서 384시간, $10^{\circ}C$에서 189시간, $25^{\circ}C$에서 45시간이었다. 초기부패 값에 도달하는데 걸리는 속도상수는 각각 $-3^{\circ}C$에서 $0.0183h^{-1}$, $0^{\circ}C$에서 $0.037h^{-1}$, $5^{\circ}C$에서 $0.052h{-1}$, $10^{\circ}C$에서 $0.14h{-1}$, $25^{\circ}C$에서 $0.57h{-1}$이었으며 $0^{\circ}C$와 $10^{\circ}C$에서 $Q_{10}-value$는 1.37이며 Ea는 48.3Cal/mol이었다. 4. 본 연구에서 사용된 장치를 이용하여 선도를 측정한 결과, 초기값은 $93.3\%$였으며, $25^{\circ}C$의 경우 저장 40시간에 $21.2\%$로, $10^{\circ}C$는 저장 144시간에 $22.3\%$로 가장 낮은 값이었으며 그 이후 일정하게 유지되었다. $05^{\circ}C,\;0^{\circ}C,\;-3^{\circ}C$는 저장기간이 길어짐에 따라서 완만히 Q값이 감소하여 각각 $5^{\circ}C$에서 336시간, $0^{\circ}C$에서 504시간만에 최저값을 나타내어 그 이후 일정하게 유지되었으며 $-3^{\circ}C$의 경우는 서서히 저하하여 저장 792시간 후에 $34.27\%$였다. 각종 온도대에 Q값의 감소 속도 상수는 $-3^{\circ}C$에서 $0.075h^{-l}$, $0^{\circ}C$에서 $0.104h^{-1}$, $5^{\circ}C$에서 $0.18h^{-1}$, $10^{\circ}C$>에서 $0.37h^{-1}$ 그리고 $25^{\circ}C$에서 $1.16h^{-1}$로, 저장 온도가 높을 수록 감소속도는 빨랐다. $0^{\circ}C-10^{\circ}C$에서 $Q_{10}-value$는 1.28, Ea는 3.78Cal/mole이었다. 5. 상기의 실험항목 (사후경직도, K값, VBN)과 선도측정장치를 이용한 실험값과의 상관성을 살펴본 결과 사후경직도와 Q-value는 상관성을 채울 수 없었다. 한편, K값과의 상관성은 -0.978(P<0.001), -0.962(P<0.001), -0.975(P<0.001), -0.944(P<0.001), -0.966(P<0.001)로 모두 높은 상관성이 인정되었다. 또, VBN과의 상관성도 -0.915(P<0.001), -0.916(P<0.001), -0.909(P<0.001), -0.888(P<0.001), 0.988(P<0.001)으로 모두 부의 상관관계가 있었으며, 특히 $24^{\circ}C$의 경우 높은 상관성이 인정되었다. 이상의 결과에서 신선도측정장치는 VBN 및 K값과 높은 상관관계가 있었으며 이장치를 이용하여 각 어종별 data를 축적시킨다면 산업적으로 유용한 장치가 될 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.499-503
• /
• 2002

In this study, to develop the high power piezoelectric transformer for adaptor, PSN-PNN-PZT system ceramics were formulated as a function of $MnO_2$ addition and its dielectric and piezoelectric characteristics were investigated. Multi-layer piezoelectric transformer using an excellent composition was also fabricated and its electrical properties evaluated. The composition ceramics added to 0.5wt%$MnO_2$ showed the maximum value of $k_p=0.61$ and $Q_m=1.321$. As the output power of piezoelectric transformer is increased, its temperature rise increased. At the fixed 18W output power, the transformer was stably operated.