• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.371-373
• /
• 1998

The SmBa$_2$Cu$_3$O$\sub$x/ single crystals were used as seeds to induced YBCO growth in MTG process. As the result, the large bulk oriented YBCO superconductors were prepared with dimension of plane 21mm and 32mm in diameter and 10mm in height. The typical Jc value of the sample is 6.5${\times}$10$^4$A/$\textrm{cm}^2$ and its flux float force is 4.6N/$\textrm{cm}^2$. The oxygen absorption in large bulk textured YBCO samples in pure oxygen was studied at several constant temperatures. It can be divided into two steps: a chemical reaction step and a diffusion step.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.11
• /
• pp.542-548
• /
• 2000

In this paper, we proposed a new load flow analysis algorithm. In order to develop it, we converted typical power flow problem into optimal problem. This problem has the objective function that minimize the difference between calculated values and specified values of bus powers and subject to bus power equations of P and Q. Using it, we solved the divergence by singularity of Jacobian matrix, the divergence by initial value in the typical power flow study. In the study of a sample system, we verified the superiority of proposed algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.47-49
• /
• 1988

This paper discusses dynamic properties of bubble garnet thin films. The dynamic properties considered are Gilbert damping parameters, saturation velocity, and wall mobility. The parameters are evaluated to facilitate the search for desirable garnet thin film compositions. Given bubble diameter and Q-value, the computer prints out all compositions which meet the desired requirements. The computer model determines magnetization, anisotropy, damping, velocity, mobility among others from the film compositions. The computer modeling program is described by an algorithm detailing its operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.491-493
• /
• 1998

The SmBa$_2$Cu$_3$O$\sub$x/ single crystals were used as seeds to induced YBCO growth in MTG process. As the result, the large bulk oriented YBCO superconductors were prepared with dimension of plane 21mm and 32mm in diameter and 10mm in height. The typical Jc value of the sample is 6.5${\times}$10$^4$A/$\textrm{cm}^2$ and its flux float force is 4.6N/$\textrm{cm}^2$. The oxygen absorption in large bulk textured YBCO samples in pure oxygen was studied at several constant temperatures. It can be divided into two steps: a chemical reaction step and a diffusion step.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.303-306
• /
• 2006

A roll rate estimation method is proposed using the GPS measurement for spinning vehicles such as guided munitions and smart bombs. Before designing the roll rate estimator, the carrier phase and the carrier frequency deviation caused by spinning have been observed. Based on the observation, the spinning frequency is estimated using I and Q value from the correlator. The proposed method is evaluated through computer simulations using a software defined receiver and a GPS IF signal generator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.229-233
• /
• 2000

In this study, the temperature coefficient of resonant frequency($TCF_r$), dielectric and piezoelectric properties of $Pb_{1-x}Sr_x[(Sb_{1/2}Nb_{1/2})_{0.035}(Mn_{1/3}Nb_{2/3})_{0.065}(Zr_{0.49},Ti_{0.51})_{0.90}]O_3$ ceramics were investigated with the Sr substitution to Pb site. The dielectric constant was increased according to the increase of Sr substitution and electromechanical coupling factor($k_t$) also showed the highest values of 0.485 when the Sr substitution was 5 mol%. Moreover, the mechanical quality factor($Q_{mt}$) showed the highest value of 233 when the Sr substitution was 2 mol%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.253-262
• /
• 1995

To develop a device for measuring fish freshness which could be move accurate and reliable than used freshness measuring systems. A new device based on digital circuit was designed using a microcomputer. The device was composed of a sensor part, 8096 microprocessor and a segment display. The effectiveness of device has been evaluated by the coefficient of correlation among the measured freshness stores such as electrical Q-value, K-value and amount of volatile basic nitrogen (VBN) of plaice, Paralichthys Olivaceus, during storage at $-3^{\circ}C,\;0^{\circ}C,\;5^{\circ}C,\;10^{\circ}C,\;and\;25^{\circ}C$. Q-values measured by a new device were more closely correlated with K-value (r=-0.978-\;-0.962,\;p<0.05) and VBN (r=-0.888-\;-0.988,\;p<0.05) in case of plaice meat. If more data would achieve using various fishes, this new designed device could be a valuable kit in fish market by its compact portability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.499-503
• /
• 2002

In this study, to develop the high power piezoelectric transformer for adaptor, PSN-PNN-PZT system ceramics were formulated as a function of $MnO_2$ addition and its dielectric and piezoelectric characteristics were investigated. Multi-layer piezoelectric transformer using an excellent composition was also fabricated and its electrical properties evaluated. The composition ceramics added to 0.5wt%$MnO_2$ showed the maximum value of $k_p=0.61$ and $Q_m=1.321$. As the output power of piezoelectric transformer is increased, its temperature rise increased. At the fixed 18W output power, the transformer was stably operated.