• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 2006

We developed the electronic ballast for the street HID lames with the leakage current detection and circuit breaker function. By detecting the leakage current and breaking the system we are protected from the electric shock and the ballast is safe from the electric damage at the time of the continuous reignition state.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2113-2118
• /
• 2016

The precise detection of electric leakage point of underground power cable is very important to reduce cost and time of maintenance and prevent electric shock accident through expedite repair of electric leakage point. This paper proposes a electric leakage point detection system underground power cable using of half-period modulated transmission waveform and earth electric potential measurement. The developed system is composed of transmitter to generate the wanted pulse waveform, receiver to measure and display earth electric potential by the transmitted pulse in electric leakage point and PC Software program to display of GPS coordinate on detection cable line. The performance of the electric leakage point detection system was tested in the constructed underground cable leakage detection test bed. The test results on signal generation voltage precision of signal transmitter, mean detection earth voltage, mean detection leakage current and electric leakage point detection error showed the developed system can be used in electric leakage point detection underground power cable.

• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.107-112
• /
• 2017

최근 가정이나 산업용 건물에서 컴퓨터, TV, 냉장고, LED 조명 등 가전기기들의 누전전류에 의한 감전사고가 지속적으로 발생하고 있다. 그리고 가정 내 벽면에 설치된 콘센트에 직접 연결되어 제어 하는 누전차단 모듈들은 모듈 후단에 병렬로 연결된 각각의 가전기기들의 누전상태를 확인하기가 쉽지 않다. 또한 전류가 정상적인 전류의 통로 이외로 흐르는 누전전류를 기존의 누전차단기들은 배전함에 설치되어 누전시 전원을 차단해 주는 역할 을 한다. 가전기기의 누전으로 인한 감전, 화재 등 여러 가지 재해가 발생하여 누전전류의 위험성이 심각하게 제시되고 있다. 이에 근거리 무선통신시스템 중에서 저전력과 저가격 면에서 장점이 많은 IEEE 80215.4 기반의 지그비통신을 이용하여 상시 감시할 수 있는 누전상태 모니터링시스템 구현방안을 제시한다.

• 생물환경조절학회지
• /
• 제25권1호
• /
• pp.49-56
• /
• 2016

본 연구는 의료살균기술의 하나인 전극을 이용한 전기충격 살균법을 순환식 수경재배의 배양액 재순환을 위한 배액 살균기술로 활용하고, 배액의 전기살균소독시스템을 구축하고자 할 때, 살균소독 효과가 높으며, 친환경적이고 경제적인 배양액 살균소독기술의 개발 및 전기살균소독시스템에서 사용될 전극의 최적 조건을 구명하고 전기소독의 가능성을 확인하기 위해 수행되었다. 전기살균소독시스템 구축 시 적정 전극소재 구명을 위해 금속 전도체의 특성 조사 및 전기실험을 실시하여 배액의 pH와 EC변화유무와 침전물 발생여부 및 배액의 원소변화 유무를 분석하였다. 새로이 개발된 전기살균소독시스템 구축 시 가장 적합한 금속 전도체 전극소재로는 전기전도도가 높고, 저항이 적으며, 소재의 수급이 용이하고, 가격이 저렴한 스테인리스 스틸임을 확인하였으며. 또한 스테인리스 스틸을 전극으로 사용하였을 때, 전기를 공급하기 전과 24V 이내의 전기를 공급한 후의 배양액내 원소변화는 거의 없는 것으로 분석되었다. 전극의 두께보다는 넓이가 증가함에 따라 전류의 양이 증가하였으며 전극의 거리가 멀수록 목표 전류량에 도달하는 시간이 증가하였다. 적합한 전류량에 따른 주요 병원균의 살균력을 조사한 결과 대표적 세균병인 풋마름병의 원인균인 Ralstonia solanacearum가 전류 15V-3A 170초에서 97%가 사멸되는 것을 확인하였으며 곰팡이병인 Fusarium oxysporum은 24V-10A에서 98%의 살균력을 보였다.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1397-1404
• /
• 2007

It is important to measure the resistive component separately from the total leakage current at power distribution line. It is because electric disasters such as electric shock and fire are caused mainly by the resistive component of the total leakage current. In this paper, a new theory for measuring the resistive component separately from the total leakage current is suggested, and is embodied to an actual circuit using operational amplifiers, analog switch and R-C low pass filter. Through experiments for various cases containing both the resistive and capacitive leakage currents, the suggested algorithm is confirmed to be able to measure the resistive leakage current within 4.1% of error even when the capacitive leakage current is much bigger than the resistive one. The suggested method is expected to lower the total cost because it can be realized using simple and cheap devices, and implies the measuring time can be possibly reduced because the resistive leakage current is computed exactly from the signals during only a half period of power voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1453-1454
• /
• 2007

A street light is an electrical equipment to improve the traffic safety and the security for people in night. However, many accidents due to electric shock have happened in recent, people were interested in the safety of electrical facilities. And people want to know the danger by touch and step voltages. When the electric power lines fall down on the ground, the fault current flows to ground rod and the potential near the ground rod is increased to induce the high touch and step voltages. In this paper, we installed different ground rods with a street light and investigated the electrical potential according to ground methods and the types of ground rod. Finally, we examined the electrical facilities with the experimental result and present the improved technical data for the safety from electric shock

• 한국화재소방학회논문지
• /
• 제28권6호
• /
• pp.47-51
• /
• 2014

본 연구에서는 태양광 발전설비가 설치되어 있는 건물에서 화재가 발생할 경우 분사되는 물을 통해 전류가 흐를 가능성 및 감전의 위험성에 대해 고찰하였다. 분사되는 물을 수학적 모델을 통하여 해석 하였고, 물 전도도 측정을 위한 물분사 시스템을 제작하여 유속에 따른 물 저항값을 측정하여 수치적으로 예상한 값과 비교하였다. 실험과 수치계산의 결과로 태양광 발전설비 화재 시 고려되어야 할 사항들을 정의할 수 있게 되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.344-351
• /
• 1999

The safe operation of electro railways is greatly dependant on its protective systems. The system so-called Fault Protection Wire(FW) is now widely adapted to protect in AT feeding systems. It is connected between the feeder and trolley circuit to return the fault current to autotransfonmers at substation. This paper computed the distribution of fault currents at FW in the system and also evaluated the safety from electric shock when ground fault or flashover occur in the feeding system. The results show FW is useful to protect power supply network from fault in electric railways

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.196-201
• /
• 2008

In DC traction systems, a part of feedback current returning through rails becomes leakage current, illumination on a metal laid underground results from the leakage current to ground. To prevent the leakage current on rails, feedback rails almost have insulated with the ground. Insulation between rails and the ground causes that the earth method changes a isolated method in DC traction systems. the rail potential rise results in the isolated method. the rail potential rise causes an electric shock when a person touches the ground and rolling stock. To decrease the rail potential rise and leakage current, there are methods for reducing the feedback resistance and current of rails, increasing the leakage resistance, decreasing the distance between substations. But it are necessary to forecast and analyze the rail potential and amplitude of leakage current. In this paper, we modeled DC traction systems and feedback circuit to simulate the rail potential and amplitude of leakage current using PSCAD/EMTDC that is power analysis program, forecasted the rail potential and amplitude of leakage current about changing various parameters in the electric circuit. By using the simulation model, we easily will forecast the rail potential and amplitude of leakage current in case of a level of basic design and maintenance in electric railway systems, valuably use basic data in case of system selection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1678-1680
• /
• 1997

The pulsed power with the high voltage and current can be used to the fields of high speed pulses of energy in different forms such as electric current and voltage, electron beam, ion beam, x-rays, gamma rays, heat, magnetics fields, sound and shock waves. This paper is directed mainly at electrical engineers working on production and practical application of high speed pulsed power with high voltage and current.