• 한국전자통신학회논문지
• /
• 제11권1호
• /
• pp.53-58
• /
• 2016

지구 온난화, 고유가 그리고 심각한 전력난 문제를 해소하기 위해, 가정용 전기요금 누진제 적용과 함께 산업용 전기요금의 지속적인 상승이 이루어지고 있어 에너지 이용 효율을 크게 개선할 수 있는 에너지 저장 시스템을 스마트 그리드에 적용하기 위한 노력들이 새롭게 시도되고 있다. 본 연구에서는 에너지 저장 장치로 활용될 수 있는 리튬이온 전지의 구성 및 동작원리, 에너지 저장 시스템의 전력계통 적용 분야, 배터리 에너지 컨버터 기술, 그리고 적용사례를 연구함으로서 에너지 저장 시스템을 전력계통에 적용하는 데 필요한 기반 기술을 확립한다.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.83-92
• /
• 2001

The properties of off-gas generated from vitrification process of ion-exchange resin were characterized. Theoretical composition and flow rate of the off-gas were calculated based on chemical composition of resin and it＇s burning condition inside CCM. The calculated off-gas flow rate was 67.9Nm$^3$/h at the burning rate of 40kg/h. And the composition of off-gas was avaluated as $CO_2$(41.4%), steam(40.0%), $O_2$(13.3%), NO(3.6%), and SO$_2$(1.6%) in order. Then, actual flow rate and composition of off-gas were measured during pilot-scale demonstration tests and the results were compared with theoretical values. The actual flow rate of off-gas was about 1.6 times higher than theoretical one. The difference between theoretical and actual flow rates was caused by the in-leakage of air to the system, and the in-leakage rate was evaluated as 36.3Nm$^3$/h. Because of continuous change in the combustion parameters inside CCM, during demonstration tests, the concentration of toxic gases showed wide fluctuation. However, the concentration of CO, a barometer of incompleteness of combustion inside CCM, was stabilized soon. The result showed quasi-equilibrium state was achieved two hours after feeding of resin.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권2호
• /
• pp.103-111
• /
• 2019

The combined cycle plant is an integration of gas turbine and steam turbine, combining the advantages of both cycles. It recovers the heat energy from gas turbine exhaust to use it to generate steam. The heat recovery steam generator plays a crucial role in combined cycle plants, providing the link between the gas turbine and the steam turbine. Simulation of the performance of the HRSG is required to study its effect on the entire cycle and system. Computational fluid dynamics has potential to become a useful to validate the performance of the HRSG. In this study a solver has been implemented in the open source code, OpenFOAM, for combustion simulation in the heat recovery steam generator. The solver is based on the steady laminar flamelet model to simulate detailed chemical reaction mechanism. Thereafter, the solver is used for simulation of HRSG system. Three cases with varying fuel injections and gas turbine exhaust gas flow rates were simulated and the results were compared with measurements at the system outlet. Predicted temperature and emissions and those from measurements showed the same trend and in quantitative agreement.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.391-396
• /
• 1998

Modified product Consistency Test (M-PCT) has been developed as an alternative to other existing methods in determining the leachability of glass. M-PCT, the leaching method, is a hybrid of MCC-l and PCT, but can provide quicker sample preparation. Larger diameter glass sample (1.0-2.0 mm) than in the PCT method can be used so that the glass beads are more easily produced and cleaned. From the M-PCT, the total mass loss (ML) of glass, the normalized elemental release rate (NLi), pH value of leachate have been obtained. For some selected glasses in which leaching rates have been known, their chemical durablility have been tested using the M-PCT method. The results are compared to the literature data for the glasses. It is found that M-PCT method is reasonable and suitable in determining the leachability of Low and Intermediate level Radioactive Waste glass form, such as the pH, elemental loss and total mass loss.

• 자원ㆍ환경경제연구
• /
• 제11권4호
• /
• pp.581-608
• /
• 2002

The electric power industry has played an important role in dramatic economic development in Korea and the electricity has constituted a critical factor sustaining the well-being of the Korean people. This study uses input-output analysis to investigate the role of four electric power sectors (hydroelectric, fossil-fuels, nuclear and non-utility) in the Korean national economy for the period 1985~1998, focusing on four topics: the impacts of electricity supply investments, the electricity supply shortage effects, and the impacts of the rise in electricity rates, and the inter-industry linkage effect. The overall results reveal that non-utility electric sector is superior in terms of the national economy-wide effects to other three sectors throughout the period. Finally, potential uses of the results are illustrated from the perspective of policy instruments and some policy implications are discussed.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권6호
• /
• pp.340-349
• /
• 2004

Recently, the needs and concerns for the power loss are increasing according to the energy conservation at the level of the national policies and power utilities's business strategies. Especially, the issue of the power loss is the main factor for the determining the electric pricing rates in the circumstances of the deregulation of electrical industry. However, because of the lacking of management for power loss load factors (LLF), it is difficult to make a calculation for the power loss and to make a decision for the electric rates. And loss factor(k-factor), which is a most important factor for calculation of the distribution power loss, has been used as a fixed value of 0.32 since the fiscal year 1973. Therefore, This study presents the statistical calculation methods of the loss factors classified by load types and seasons by using the practical data of 65 primary feeders which are selected by proper procedures. Based on the above the algorithms and methods, the optimal method of the distribution loss management classified by facilities such as primary feeders, distribution transformers and secondary feeders is presented. The simulation results show the effectiveness and usefulness of the proposed methods.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.372-378
• /
• 2018

Life management technology is required as the failure risk of aged power transformers increases. Asset management technology is developed to evaluate the remaining life, establish the replacement strategies, and decide the optimal investment based on the reliability and economy of power transformers. The remaining life assessment uses data such as installation, operation, maintenance, refurbishment, and failure of power transformers. The optimal investment also uses data such as maintenance, outage, and social costs. To develop the asset management system for power transformers, determining the degradation parameters related to the aging of power transformers and evaluating the condition of power transformers using these parameters are important. In this study, since 1983, 110,000 Dissolved Gas Analysis (DGA) data have been analyzed to determine the degradation parameters related to the aging of power transformers. The alarm rates of combustible gases ($H_2$, $C_2H_2$, $C_2H_4$, $CH_4$, and $C_2H_6$), TCG, CO, and $CO_2$ were analyzed. The end of life and failure rate (bathtub curve) of power transformers were also calculated based on the failure data from 1981 to 2014. The DGA gases related to discharge, overheating, and insulation degradation were determined based on alarm and failure rates. $C_2H_2$, $C_2H_6$, and $CO_2$ were discharge, oxidation, and insulation degradation parameters related to the aging of power transformers.

• Journal of Biosystems Engineering
• /
• 제33권3호
• /
• pp.204-209
• /
• 2008

The power strength of electric wave of reader looked radiation forms from the gate type RFID system. The more distant from antennas, the weaker of power strength of electric wave. The power strength of electric wave with 3 antennas showed stronger than its with 2 antennas. With 2 antennas, the coefficient of correlation between the power strength of electric wave and response ability of tag was 0.665 (p=0.009), and it showed results at significance level. With 3 antennas, the coefficient of correlation was 0.711 (p=0.004), correlationship between the power strength of electric wave and the response ability of tag showed at significance high level. From the analysis result about tag reading performance on the gate type RFID system, the reading rate was good when tags were attached on a acrylic plate which were located in front of 3 or 4 antennas. As tags were getting away from antennas, the reading rate was decreased. The nearer from antennas, the higher the reading rate at the center. When tags were turned at right angles with antennas, the longer distant from antennas, the lower reading rates at the center, right and left locations. When the number of antennas and distance are constant, respectively, the significant difference of the tag reading rates according to the locations of left, right and center were not found.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.535-539
• /
• 1995

In recent years, electric industries in many countries confront with a structural change in business and socio-economic environments. Since 1984, PUC and utilities in U.S.A. have adopted or developing competitive bidding systems, and this new procurement programs prevailing and restructuring the power markets. In Korea, government and the Korea Electric Power Corporation (KEPCO) invited the private sector to build and operate two 500 MW coal plants and two 400 MW LNG plants during 2001 - 2004. The plan also specifies basic concepts and conditions for the IPP projects such that new IPPs are selected through competitive bidding system with the purchased power price based on the avoided cost. In this study, the direction, guideline and scoring methods to Korean IPP bidding system are presented. Also, as a benchmark price and rates for purchased power, the avoided cost calculation models are developed, this study may contribute for the development of private power in Korea, and improve overall economic efficiencies of whole electric power sector.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.307-316
• /
• 2005

원전 주변의 주민에 대한 방사선량의 대부분을 음식물 섭취에 의한 내부피폭이 차지하고 있다 그러나 우리나라 원전에 적용하고 있는 음식물 섭취량은 1989년 한국원자력연구소가 고리원전 주변지역을 대상으로 현장조사한 결과로 최근의 식습관 변화를 적절히 반영하지 못하고 있다. 보건복지부에서는 국민건강증진법에 의거 매 3년마다 전국 규모의 국민의 식품 및 영양 섭취실태 조사를 실시하고 있다 따라서 이러한 정부 조사자료를 활용하여 주기적으로 음식물 섭취량 자료를 갱신할 수 있는 방안을 모색할 필요가 있다. 국내원전에 적용하고 있는 음식물 섭취량 자료를 개선하기 보건복지부 국민영양조사 결과를 분석하고, 원자력발전소 주변 주민을 대상으로 현장 조사를 실시하였다.