• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1552-1553
• /
• 2011

The HVDC transformer which is one of the main equipments for HVDC(High Voltage Direct Current) electric power transmission systems is exposed to not only AC voltage but also the inflowing DC voltage which comes from the DC-AC converter systems. Therefore, the HVDC transformer insulation system is required to withstand the electric field stress under AC, DC and DC polarity reversal conditions. However the electric field distributions under those conditions are different because the AC electric field and DC electric field are governed by permittivity and conductivity, respectively. In this study, the changes of electric potential and electric field of conventional AC transformer insulation system under DC polarity reversal test condition were analyzed by FEM(Finite Element Method). The DC electric field stress was concentrated in the solid insulators while the AC electric field stress was concentrated in the mineral oil. In addition, the electric stress under that condition which is affected by the surface charge accumulation at the interfaces between insulators was evaluated. The stress in some parts could be higher than that of AC and DC condition, during polarity reversal test. The result of this study would be helpful for the HVDC transformer insulation system design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.540-541
• /
• 2005

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.137-143
• /
• 2006

The effect of electric fields on flame speed has been investigated experimentally by observing propagating premixed flames in a tube for methane/air mixtures. The flame speeds were measured in both the normal and micro gravity conditions to substantiate the measurements. The results show that the flame speeds were enhanced by both the AC and DC electric fields, as the flame approached to the high voltage electrode located on the one end of the tube. The enhancement of flame speed was proportional to the square root of the electric field intensity, defined as the voltage applied divided by the distance of flame from the high voltage electrode, when the electric field intensity is sufficiently large. When the electric field intensity was low, there existed critical intensities, below which the electric fields did not influence the flame speed. This critical electric field intensity correlated well with the flame speed.

• Journal of Environmental Health Sciences
• /
• v.20 no.3
• /
• pp.61-77
• /
• 1994

Sprague Dawley rats were exposed to electric fields (6,000 V, 10 kV/m, 30 min/day, 6 days per week) and injected strontium 90 (681 kbq/rat, one time) through abdominal cavity (strontium 90 and electric field complexed exposure group). In parallel, series with the electric field exposure only, strontium 90 injection only and control groups were run. Every group was consisted of 110 rats (55 male and 55 female). This animal experiment was performed from May to December in 1993. This results were conducted to investigate the effect of electric field for 11 weeks. The results are summarized as follows: 1. Ornithine decarboxylase (ODC) activity in rat's bone marrow cells: The ODC values was significantly increased in Sr$^{90}$ injection group and Sr$^{90}$ and electric field complexed exposure group as compared with that of control group (p<0.05). The ODC value was significantly decreased in electric field and Sr$^{90}$ complexed exposure group in comparison with Sr$^{90}$ injection group (p<0.05). The ODC values of electric field only exposure group was not different to that of control group (p>0.05). 2. The amount of Sr$^{90}$ accumulation in the femur, kidney and spleen:The accumulation amount of Sr$^{90}$ in the femur of Sr$^{90}$ injection group represented higher value than that of electric field and Sr$^{90}$ complexed exposure group (p<0.05). In the kidney and spleen, the difference between electric field and Sr$^{90}$ complexed exposure group and Sr$^{90}$ injection group wasn't observed. 3. The counts of white cells in blood of Sr9?injection group was decreased as compared with the value from control group and electric field and Sr$^{90}$ complexed exposure group (p<0.05). The rat's body weight, red blood cell counts and the weight data of liver, kidney and spleen did not show differences among four groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.852-857
• /
• 2006

This paper presents a precision method to calculate the electric field density of mountain area using digital terrain elevation data(DTED). Generally we calculate the electric field density of a point adding a direct field density and horizontal reflection field density between two points. In this paper, we consider a vertical reflection field density from vertical surface near the wave propagation line between transmitter and receiver. The vertical reflection electric field have different propagation path and polarization from a horizontal reflection field. And the total electric field density adding horizontal field density and vertical reflection value is more accurate than a direct path electrical field density or direct field density adding a horizontal reflection field density.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.2
• /
• pp.119-123
• /
• 1998

The feasibility of using combined treatments of electric field and chemical mutagen N-methyl-N'-nitro-N-nitroso-guanidine (NTG) for the strain improvement of Saccharomyces sp. in ethanol production was examined. The treatment of electric field alone resulted in no effect on the lethality of yeast cells under the conditions of this study. However, when the electric field was applied together to the treatment of yeast cells with NTG, the electric field increased the lethal effect and auxotrophic mutation rate of NTG. The combined treatment of electric field and NTG also increased the chances of. obtaining superior yeast strains for the ethanol production from tapioca. A higher number of improved clones was obtained by the combined treatments of electric field and NTG than by the NTG treatment alone. The best clone, NF 30-9, which was also obtained by the combined treatment, produced $11.07\%$ (w/v) ethanol from tapioca slurry containing 25% (w/v) reducing sugar while the parental strain produced 9.77% (w/v).

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.92-102
• /
• 2003

To detect electrical faults of a TFT (Thin Film Transistor) panel for the LCD (Liquid Crystal Display), techniques of converting electric field to an image are used One of them is the PDLC (polymer-dispersed liquid crystal) modulator which changes light transmittance under electric field. The advantage of PDLC modulator in the electric field detection is that it can be used without physically contacting the TFT panel surface. Specific pattern signals are applied to the data and gate electrodes of the panel to charge the pixel electrodes and the image sensor detects the change of transmittance of PDLC positioned in proximity distance above the pixel electrodes. The image represents the status of electric field reflected on the PDLC so that the characteristic of the PDLC itself plays an important role to accurately quantify the defects of TFT panel. In this paper, the image of the PDLC modulator caused by the change of electric field of the pixel electrodes on the TFT panel is acquired and how the characteristics of PDLC reflect the change of electric field to the image is analyzed. When the holding time of PDLC is short, better contrast of electric field image can be obtained by changing the instance of applying the driving voltage to the PDLC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.963-971
• /
• 2000

In order to investigate the effects of an electric field on EHD(Electro-hydrodynamic) nucleate boiling hat transfer characteristics in a nonuniform electric field under saturated pool boiling, the basic study has been performed experimentally. In the present study, the working fluid is R-113 and the plate-wire electrode system is used to generate a steep electric field gradient. Boiling parameters are investigated by using a high speed camera. The electric field distribution around a wire is obtained to understand the effect of an electric field on bubble departure/movement. The experimental results show EHD effects are much more considerable when the applied voltage increases. Bubbles depart away from the heated wire in radial direction. It is confirmed that the mechanisms of EHD nucleate boiling are closely connected with the dynamic behavior of bubbles. The boiling parameters are significantly changed by the electric field strength. With increasing applied voltages, the bubble size decreases and the nucleation site density, bubble velocity and bubble frequency increase.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.57-64
• /
• 2001

There are some previous reports that some animals such as rats and birds move in a large group and act abnormally to avoid the large earthquake. This study is to experimentally testify what relations exist between the anomalous animal behavior and electric field effect, which is reported due to the piezoelectric effects in a basement rock before earthquake occurrences. When electric field is applied to the whole bottom of the cage, they show nervous behaviors such as grooming, washing their faces, standing on legs or running around in panic to avoid the electric field. When more strong electric field is applied, they jump with shrieking and mount on the electric line. The rat shows more sensitive anomalous behavior than the bird. Even though the current to the experimental birds and rats is just a few $\mu$A, they react in various ways. The anomalous animal behaviors under the small ground electric field may have some relations to the actual phenomena before great earthquake. This kind of study is quite worthy for the understanding of earthquake precursors.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.10
• /
• pp.471-476
• /
• 2005

We proposed an optical modulator of reflective type to compose the electric field sensor, and theoretically analyzed the performance and characteristics. For the high sensitivity of the sensor, a method to improve the modulation index of the modulator was presented. The electric field sensor using Ti:LiNbO$_{3}$ waveguide was fabricated and qualitatively investigated the characteristics by measuring the low frequency electric field. Even though the sensor showed relatively low modulation index, the electric filed strength of 10$^{-2}$V/m was measured. The experimental results revealed the utilities of this type electric field sensor.