• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.618-625
• /
• 2021

In this paper, the single-photon avalanche diodes (SPADs) featuring three different p-well implantation doses (∅_p-well) of 5.0 × 10¹², 4.0 × 10¹², and 3.0 × 10¹² atoms/cm² under the identical device layouts were fabricated and characterized to evaluate the effects of field enhanced mechanisms on primary dark pulses due to the maximum electric field. From the I-V curves, the breakdown voltages were found as 23.2 V, 40.5 V, and 63.1 V with decreasing ∅_p-well, respectively. By measuring DCRs as a function of temperature, we found a reduction of approximately 8% in the maximum electric field lead to a nearly 72% decrease in the DCR at V_ex = 5 V and T = 25 ℃. Also, the activation energy increased from 0.43 eV to 0.50 eV, as decreasing the maximum electric field. Finally, we discuss the importance of electric field engineering in reducing the field-enhanced mechanisms contributing to the DCR in SPADs and the benefits on the SPADs related to different types of radiation detection applications.

• Reproductive and Developmental Biology
• /
• v.31 no.4
• /
• pp.273-278
• /
• 2007

This study was conducted to examine the protein kinase inhibitors, 6-dimethylaminopurine (DMAP) and cycloheximide (CHXM) on the development and chromosome constitution of porcine parthenogenetic embryos. In vitro matured oocytes were activated by electric stimuli (ES) or a combination of ES with culture in 2 mM DMAP or $10{\mu}g/ml$ CHXM for 4 hr. Activated oocytes were cultured in PZM-3 for 6 days. Some 1-cell embryos and blastocysts were fixed by air dry method to analyze the chromosome constitutions and/or total cell number. Blastocyst development of DMAP-treated group (26.7%) was significantly higher (p<0.05) than those of CHXM-treated and ES control groups. Ploidy in 1-cell stage embryos was not different among groups (77.3 to 81.0%), however, proportion of diploid chromosome constitutions was high in DMAP-treated group (61.9%, p<0.05). In the blastocyst stage, proportion of diploid chromosome plates was significantly high in DMAP-treated group (64.2%, p<0.05), and proportion of abnormal chromosome plates was higher in CHXM-treated group (36.6%, p<0.05) than DMAP-treated group (28.3%,). Proportion of embryos with abnormal chromosome constitutions was slightly increased by DMAP (40.0%) and CHXM (42.1%) treatment due to the increasing of mixoploid (47.4 and 52.0%). The present study shows that the DMAP treatment increase the development of porcine parthenotes. However, parthenogenetic activation by ES or combined treatment with ES and DMAP or CHXM detrimentally affects the chromosome constitutions of porcine parthenotes during early embryonic development, leads to increased abnormal ploidy in the blastocyst stage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.78-86
• /
• 1995

Abstract We have investigated the structure and the conductivity of the CdTe films evaporated on the glass substrates by Electron Beam Evaporator (EBE) technique. The structure is observed to be polycrystalline whose phase is mainly hexagonal phase with some cubic phase. Dark electric conductivity is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and slightly increased by annealing for an hour at $300^{\circ}C$. Activation energy calculated from the electrical conductivity which varies with increasing temperature is 1.446 eV in the case of room temperature substrates. The values of optical band gap are 1.52 eV in direct transition whereas 1.44 eV in indirect. The photoconductivity of the films is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and the peak energy is about 600 nm in the room temperature. The photoconductivity starts to increase at 850 nm, which is close to 1.446 eV, the activation energy of CdTe polycrystal films.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.933-940
• /
• 2018

The conversion of the internal combustion engine vehicle to the electric vehicle is suggested as a solution to the problem of global climate change and environmental pollution. Accordingly, this study was started to promote the use of electric vehicles. The purpose of this study is to identify the basic background knowledge and current status of electric vehicles in Korea and abroad, and expand from previous understanding on which factors affect ones choice on electric vehicles by considering individual characteristics and context in detail. In the analysis, a set of demand forecasting models were constructed by grouping the respondents based on the household characteristics as well as the vehicle ownership. At the time in need for better understanding of the feasibility of electric vehicles, it is expected that the research can assist the promotion of electric vehicles. In the follow-up study, I would like to continue the research on the activation of electric vehicles.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.153-159
• /
• 2021

A two-step process for increasing the leaching efficiency of yttrium and neodymium from coal fly ash were investigated at solid loadings of 5.0 g ash ~1,000 g ash/l of 1.0 N~10.0 N H₂SO₄, temperature ranging from 30℃ to 90℃, ultrasonic leaching time of 1~10 hours, and ultrasonic power of 25~200 W. The yttrium and neodymium from coal fly ash were effectively leached into ion phases by step change of the first conventional dissolution at room temperature and then the second heating process with the aid of ultrasonic wave, and maximum leaching efficiency of yttrium and neodymium obtained were 66 % and 63 %, respectively. The activation energies for the leaching reaction of yttrium and neodymium at second heating process dependent on leaching time and temperature were derived to be 41.540 kJmol^-1 and 507.92 kJmol^-1, respectively. The optimum conditions for the maximum leaching of yttrium and neodymium were found to be the solid loading of 250 g ash/l of H₂SO₄, solvent concentration of 2.0 N H₂SO₄, and second step process of temperatures of 30℃ for 3 hours and then 90℃ for 4 hours with ultrasonic intensity of 100 W.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2023

In this study, a deep learning algorithm was used to diagnose electric potential signals obtained through CIPS and DCVG, used indirect inspection methods to confirm the soundness of buried pipes. The deep learning algorithm consisted of CNN(Convolutional Neural Network) model for diagnosing the electric potential signal and Grad CAM(Gradient-weighted Class Activation Mapping) for showing the flaw prediction point. The CNN model for diagnosing electric potential signals classifies input data as normal/abnormal according to the presence or absence of flaw in the buried pipe, and for abnormal data, Grad CAM generates a heat map that visualizes the flaw prediction part of the buried pipe. The CIPS/DCVG signal and piping layout obtained from the 3D finite element model were used as input data for learning the CNN. The trained CNN classified the normal/abnormal data with 93% accuracy, and the Grad-CAM predicted flaws point with an average error of 2m. As a result, it confirmed that the electric potential signal of buried pipe can be diagnosed using a CNN-based deep learning algorithm.

• Journal of Embryo Transfer
• /
• v.19 no.1
• /
• pp.43-51
• /
• 2004

The present study was conducted to investigate the effects of fusion and/or activation protocol on in vitro development of porcine somatic cell nuclear transfer (SCNT) embryos. Porcine fetal fibroblast cells were transferred into the perivitelline space of enucleated in vitro matured oocytes. Cell fusion and activation were induced simultaneous fusion/activation (SA) or delayed activation (DA) with or without cytochalasin B (CB) treatment with electic pulses in 0.28 M mannitol-based medium. The SCNT embryos were cultured in vitro for 7 days and stained with Hoechst 33342 to determine the number of nuclei. After 7 days culture, cleavage and blastocyst formation rates were 72.4% and 7.6% in SCNT and 76.3% and 20.4% in parthenotes. To examine the effect of electric field strengths on development of SCNT embryos, oocytes were fused two pulses of 110 V/mm, 130 V/mm or 150 V/mm for 30 sec post-injection. The fusion and cleavage rates in 130 V/mm group (70.2% and 72.6%) and 150 V/mm group (72.6% and 70.5%) were higher (P<0.05) than 110 V/mm group (47.1% and 48.6%), respectively. However, the rate of embryos developing to the blastocyst stage (8.1%, 9.7% and 10.7%) were not different among three groups. The cleavage rates and the blastcyst formation rates were not different among three treatment groups (SA group, 71.4% and 9.7%; SA+CB treatment group, 74.7% and 8.0%; DA+CB treatment group, 70.8% and 11.2%, respectively). And, no different in the number of cells in blastocysts was observed among the three groups (22.5$\pm$12.8, 23.3$\pm$11.2 and 21.6$\pm$10.4, respectively). These result suggest that two pulses of 130 V/mm or 150 V/mm for 30 sec with SA treatment or DA treatment are enough for fusion/activation of porcine somatic cell nuclear transfer (SCNT) embryos to develop to the blastocyst stage.

• Reproductive and Developmental Biology
• /
• v.37 no.1
• /
• pp.51-55
• /
• 2013

The present study was conducted to examine the effect of antioxidant treatment during parthenogenetic activation procedure on the reactive oxygen species (ROS) levels and in vitro development of porcine parthenogenetic embryos. Porcine in vitro matured oocytes were activated by a combination of electric stimulus and 2 mM 6-dimethylaminopurine (6-DAMP) before in vitro culture. During the activation period, oocytes were treated with $50{\mu}M$ ${\beta}$-mercaptoethanol (${\beta}$-ME), $100{\mu}M$ L-ascorbic acid (Vit. C) or $100{\mu}M$ L-glutathione (GSH). To examine the ROS level, porcine parthenogenetic embryos were stained in $10{\mu}M$ dichlorohydrofluorescein diacetate ($H_2DCFDA$) dye 20 h after culture, examined under a fluorescence microscope, and the fluorescence intensity (pixels) were analyzed in each embryo. The parthenogenetic embryos were cultured for 6 days to evaluate the in vitro development. The apoptosis was measured by TUNEL assay. The $H_2O_2$ levels of parthenogenetic embryos were significantly lower in antioxidant treatment groups ($26.9{\pm}1.6{\sim}29.1{\pm}1.3$ pixels/embryo, p<0.05) compared to control ($33.2{\pm}1.7$ pixels/embryo). The development rate to the blastocyst stage was increased in antioxidant treatment groups (32.0~32.5%) compared to control (26.9%, p<0.05), although, there was no difference in apoptosis among groups. The result suggests that antioxidant treatment during parthenogenetic activation procedure can inhibit the ROS generation and enhance the in vitro development of porcine parthenogenetic embryos.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.107-111
• /
• 2019

The activation energy to create a phase transformation or for the reaction to move to the next stage in the milling process can be calculated from the slop of the DSC plot, obtained at the various heating rates for mechanically activated Al-Ni alloy systems by using Kissinger's equation. The mechanically activated material has been called "the driven material" as it creates new phases or intermetallic compounds of AlNi in Al-Ni alloy systems. The reaction time for phase transformation by milling can be calculated using the activation energy obtained from the above mentioned method and from the real required energy. The real required energy (activation energy) could be calculated by subtracting the loss energy from the total input energy (calculated input energy from electric motor). The loss energy and real required energy divided by the reaction time are considered the "metabolic energy" and "the effective input energy", respectively. The milling time for phase transformation at other Al-Co alloy systems from the calculated data of Al-Ni systems can be predicted accordingly.

• Investigative Magnetic Resonance Imaging
• /
• v.26 no.2
• /
• pp.96-103
• /
• 2022

Purpose: The survival of organisms critically depends on avoidance responses to life-threatening stimuli. Information about dangerous situations needs to be remembered to produce defensive behavior. To investigate underlying brain regions to process information of danger, manganese-enhanced MRI (MEMRI) was used in olfactory fear-conditioned rats. Materials and Methods: Fear conditioning was conducted in male Sprague-Dawley rats. The animals received nasal injections of manganese chloride solution to monitor brain activation for olfactory information processing. Twenty-four hours after manganese injection, rats were exposed to electric foot shocks with odor cue for one hour. Control rats were exposed to the same odor cue without foot shocks. Forty-eight hours after the conditioning, rats were anesthetized and their brains were scanned with 9.4T MRI. Acquired images were processed and statistical analyses were performed using AFNI. Results: Manganese injection enhanced brain areas involved in olfactory information pathways in T1 weighted images. Rats that received foot shocks showed higher brain activation in the central nucleus of the amygdala, septum, primary motor cortex, and preoptic area. In contrast, control rats displayed greater signals in the orbital cortex and nucleus accumbens. Conclusion: Nasal delivery of manganese solution enhanced olfactory signal pathways in rats. Odor cue paired with foot shocks activated amygdala, the central brain region in fear, and related brain circuits. Use of MEMRI in fear conditioning provides a reliable monitoring technique of brain activation for fear learning.