• Journal of the Korean Wood Science and Technology
• /
• 제34권1호
• /
• pp.32-39
• /
• 2006

본 연구는 현악기에 사용되는 현악기용 도료가 현악기의 음향성능에 미치는 영향을 조사하였다. 음향분석장치(FFT)를 이용하여 목재악기용 도료의 도막두께에 따른 음향적 성능을 평가하였다. 목재악기용으로 사용된 도료는 악기용 우레탄계 상도도료, 오일 스테인계 도료, 자외선 경화형 에폭시 도료이다. 형성된 도막의 음향적인 특성은 FFT 분석기에서 측정된 공명주파수와 댐핑값(damping factor)으로부터 동적탄성계수와 전단탄성계수를 계산하여 얻고, 밀도와의 관계와 탄성계수간의 관계를 통하여 도막의 두께에 따른 음향적인 특성을 측정하고 비교분석하여 상관관계를 조사하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.129-134
• /
• 2010

This paper investigates effects of rubber inclusion on the strength and physical characteristics of rubber.added composite geomaterial (CGM) in which dredged soils, crumb rubber, and bottom ash are reused for recycling. Several series of test specimens were prepared at 5 different percentages of rubber content (i.e. 0%, 25%, 50%, 75%, and 100% by weight of the dry dredged soil) and three different percentages of bottom ash content (i.e. 0%, 50% and 100% by weight of the dry dredged soil). The mixed soil specimens were subjected to unconfined compression test and elastic wave test to investigate their unconfined compressive strengths and small strain properties. The values of bulk unit weight of the CGM with bottom ash content of 0% and 100% decrease from 14kN/$m^3$ to 11kN/$m^3$ and 15kN/$m^3$ to 12kN/$m^3$, respectively, as rubber content increases, because the rubber had a specific gravity of 1.13. The test results indicated that the rubber content and bottom ash content were found to influence the strength and stress-strain behavior of CGM. Overall, the unconfined compressive strength, and shear modulus were found to decrease with increasing rubber content. Among the samples tested in this study, those with a lower rubber content exhibited sand-like behavior and a higher shear modulus. Samples with a higher rubber content exhibited rubber-like behavior and a lower shear modulus. The CGM with 100% bottom ash could be used as alternative backfill material better than CGM with 0% bottom ash. The results of elastic wave tests indicate that the higher rubber content, the lower shear modulus (G).

• 비파괴검사학회지
• /
• 제9권2호
• /
• pp.18-24
• /
• 1989

Computer-aided high frequency ultrasonic is applied to aluminum oxide(85w%, 94w%, 96w%, and 99w%) MOR(modulus of rupture) samples to evaluate mechanical properties such as density variation, pore content, elastic modulus, shear modulus, and poisson's ratio. Ultrasonic wave velocity and attenuation measurement techniques were used as an evaluator of such properties. Pulse-echo C-Scan images with different fate setting method using 50MHz center frequency 1 inch focal length transducer allows evaluation of density variation and pore content. Elastic modulus calculated with the relation of density and ultrasonic velocity. It shows good reliability as compared with resonance method. Sintered density variation of $0.025g/cm^{3}$, that is 0.6% of theoretical density in $Al_{2}O_{3}$ samples can be observed by ultrasonic velocity measurement. Attenuation measurement method qualitatively agree with 4-point fracture testing result concerning of porosity content.

• Structural Engineering and Mechanics
• /
• 제62권1호
• /
• pp.113-123
• /
• 2017

The bi-material elastic system consisting of the circular hollow cylinder and the infinite elastic medium surrounding this cylinder is considered and it is assumed that on the inner free face of the cylinder a point-located axisymmetric time harmonic force, with respect to the cylinder's axis and which is uniformly distributed in the circumferential direction, acts. The shear-spring type imperfect contact conditions on the interface between the constituents are satisfied. The mathematical formulation of the problem is made within the scope of the exact equations of linear elastodynamics. The focus is on the frequency-response of the interface normal and shear stresses and the influence of the problem parameters, such as the ratio of modulus of elasticity, the ratio of the cylinder thickness to the cylinder radius, and the shear-spring type parameter which characterizes the degree of the contact imperfectness, on these responses. Corresponding numerical results are presented and discussed. In particular, it is established that the character of the influence of the contact imperfection on the frequency response of the interface stresses depends on the values of the vibration frequency of the external forces.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1404-1414
• /
• 2008

In the mechanistic-empirical trackbed design of railways, the resilient modulus is the key input parameter. This study focused on the resilient modulus prediction model, which is the functions of mean effective principal stress and axial strain, for three types of railroad trackbed materials such as crushed stone, weathered soil, and crushed-rock soil mixture. The model is composed with the maximum Young's modulus and nonlinear values for higher strain in parallel with dynamic shear modulus. The maximum values is modeled by model parameters, $A_E$ and the power of mean effective principal stress, $n_E$. The nonlinear portion is represented by modified hyperbolic model, with the model parameters of reference strain, ${\varepsilon}_r$ and curvature coefficient, a. To assess the performance of the prediction models proposed herein, the elastic response of a test trackbed near PyeongTaek, Korea was evaluated using a 3-D nonlinear elastic computer program (GEOTRACK) and compared with measured elastic vertical displacement during the passages of freight and passenger trains. The material types of sub-ballasts are crushed stone and weathered granite soil, respectively. The calculated vertical displacements within the sub-ballasts are within the order of 0.6mm, and agree well with measured values with the reasonable margin. The prediction models are thus concluded to work properly in the preliminary investigation.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.51-62
• /
• 2006

Differential transform method (DTM) for free vibration analysis of both ends simply supported beam resting on elastic foundation is suggested. The fourth order partial differential equation for free vibration of the beam resting on elastic foundation subjected to bending moment, shear and axial compressive load is obtained by using Winkler hypothesis and small displacement theory. It is assumed that the material is linear-elastic, and that axial load and modulus of subgrade reaction to be constant. In the analysis, shear and axial load effects are considered. The frequency factors of the beam are calculated by using DTM due to the values of relative stiffness; the results are presented in graphs and tables.

• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.247-268
• /
• 2006

The parts of pile, above the soil and embedded in the soil are called the first region and second region, respectively. The forth order differential equations of both region for critical buckling load of partially embedded pile with shear deformation are obtained using the small-displacement theory and Winkler hypothesis. It is assumed that the behavior of material of the pile is linear-elastic and that axial force along the pile length and modulus of subgrade reaction for the second region to be constant. Shear effect is included in the differential equations by considering shear deformation in the second derivative of the elastic curve function. Critical buckling loads of the pile are calculated for by differential transform method (DTM) and analytical method, results are given in tables and variation of critical buckling loads corresponding to relative stiffness of the pile are presented in graphs.

• 대한토목학회논문집
• /
• 제28권3C호
• /
• pp.159-166
• /
• 2008

흙은 변형률에 따라 강성이 감소하는 비선형적 변형 특성을 가지지만, 매우 작은 변형률 영역($<10^{-3}%$)에서는 선형탄성적 특성을 갖는다고 알려져 있다. 본 연구에서는 응력 경로 시험 중 실시한 다축 벤더엘리먼트 시험을 통해 다양한 응력 상태에서 사질토의 이방적 전단탄성계수를 측정하고, 그 변화를 분석하고자 하였다. 응력 경로 시험에서는 내부 변형률 측정 장치 및 3 방향의 벤더 엘리먼트가 부착된 삼축 시험기를 이용하였다. 전단 중 응력비가 -0.5~1.5의 범위를 벗어나게 되면 축 방향 전단탄성계수는 응력과의 경험적 상관관계와 차이가 발생하였고, 이로부터 시료의 항복이 전단파 전달 구조를 변화시킴을 알 수 있었다. 수평방향 전단탄성계수의 변화는 전단 중 체적 상태의 변화와 밀접한 관계가 있음을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제14권2호
• /
• pp.51-55
• /
• 2013

연약지반을 개량하기 위한 심층혼합처리공법과 같은 다양한 공법은 지반보강을 위하여 그라우트를 광범위하게 사용하고 있다. 반복하중 및 동하중을 받는 지반-구조물계의 설계에 사용되는 중요한 동적변수는 사질토 및 화강풍화토, 암시편에 관하여 많이 연구 발표되었다. 하지만 그라우트로 보강된 지반에 대한 내진설계 연구는 미비한 실정이다. 이에 본 연구에서는 공진주시험기를 이용하여 점성토와 보통 포틀랜드 시멘트의 함수비와 그라우트 주입률의 변화에 따른 전단변형률과 전단탄성계수의 상관관계를 Ramberg-Osgood Model로 정규화하여 비교 분석하였다. 그 결과 동적계수는 함수비와 그라우트 주입율에 의해 영향을 받는 것으로 나타났다.

• 터널과지하공간
• /
• 제33권3호
• /
• pp.150-168
• /
• 2023

암석의 이방성 거동은 조암광물들의 방향성 배열과 미세균열의 분포 특성이 주된 원인이다. 특히, 퇴적암과 변성암은 횡등방성 강도 및 변형 특성을 또렷이 나타내는 경우가 많다. 그러므로 암석역학적 설계과정에서는 횡등방성 암석의 변형 및 파괴 특성을 정확하게 이해하는 것이 중요하다. 횡등방성 암석의 변형은 실내시험을 통해 측정할 수 있는 5개의 독립된 탄성정수를 이용하여 기술된다. 이 연구에서는 문헌에 보고된 실험자료를 이용하여 횡등방성 암석의 겉보기 탄성정수의 방향성 변화 특성을 분석하였다. 임의 방향으로 회전된 직각좌표계에서 겉보기 탄성정수 값을 효율적이고 체계적으로 계산하기 위해 Mehrabadi & Cowin의 구성방정식을 도입하였다. 문헌에 보고된 4개 횡등방성 암석을 선택하여 연약면의 방향 변화가 겉보기 탄성계수, 겉보기 전단 탄성계수, 겉보기 포아송비의 변화에 미치는 영향을 분석하였다. 이러한 분석 결과를 바탕으로 새로운 탄성정수 제약 조건식을 제안하였다. 제안한 제약 조건식을 만족하면 횡등방성 암석에서 겉보기 탄성정수의 방향성 변화는 직관적으로 예측되는 경향과 일치하게 된다.