Recently, a lot of research has been done on the analysis of axial vibrations of homogeneous and FG nanotubes (nanorods) with various aspects of vibrations that have been fully mentioned in history. However, there is a lack of investigation of the dynamic internal resonances of FG nanotubes (nanorods) between them. This is one of the essential or substantial characteristics of nonlinear vibration systems that have many applications in various fields of engineering (making actuators, sensors, etc.) and medicine (improving the course of diseases such as cancers, etc.). For this reason, in this study, for the first time, the dynamic internal resonances of FG nanorods in the simultaneous presence of large-amplitude size dependent behaviour, inertial and shear effects are investigated for general state in detail. Such theoretical patterns permit as to carry out various numerical experiments, which is the key point in the expansion of advanced nano-devices in different sciences. This research presents an AFG novel nano resonator model based on the axial vibration of the elastic nanorod system in terms of derivation from large-amplitude size dependent internal modals interactions. The Hamilton's Principle is applied to achieve the basic equations in movement and boundary conditions, and a harmonic deferential quadrature method, and a multiple scale solution technique are employed to determine a semi-analytical solution. The interest of the current solution is seen in its specific procedure that useful for deriving general relationships of internal resonances of FG nanorods. The numerical results predicted by the presented formulation are compared with results already published in the literature to indicate the precision and efficiency of the used theory and method. The influences of gradient index, aspect ratio of FG nanorod, mode number, nonlinear effects, and nonlocal effects variations on the mechanical behavior of FG nanorods are examined and discussed in detail. Also, the inertial and shear traces on the formations of internal resonances of FG nanorods are studied, simultaneously. The obtained valid results of this research can be useful and practical as input data of experimental works and construction of devices related to axial vibrations of FG nanorods.
본 연구에서는 변압기 설계에 활용하기 위해 조화응답해석을 이용하여 소음저감 대책에 따른 소음 저감 예측방법을 제안한다. 변압기 부품들의 재질을 간단한 형상의 시편으로 제작하고, 실험과 해석의 모드 비교분석을 통해 실제 변압기를 구성하는 부품들의 동적 탄성계수를 규명하였다. 변압기의 유한요소모델을 구현하고 변압기의 가진력을 도출하여 조화응답해석을 수행하였다. 그리고 조화응답해석 결과에서 변압기의 음향파워레벨(Sound power level)을 이론적으로 도출하였다. 마지막으로 소음저감 대책을 수립하고, 적용 전·후에 따른 실험과 해석의 소음 저감량을 비교하였다. 대책별 소음저감 비교분석을 통해 실험과 해석의 경향이 일치하는 것을 확인하였다.
본 연구에서는 분자동역학 전산모사를 통해 육방정계 단일벽 질화붕소 나노튜브(BNNT)의 반경 변화에 따른 압전탄성 변화를 규명하였다. 질화붕소의 거동을 비교적 잘 모사하는 Tersoff 포텐셜과 기계적 하중인가에 따른 질소 및 붕소원자의 상대변위로 인한 분극의 정량화를 위해 강체 이온 근사를 채택하였다. 선형 압전탄성 구성방정식을 기반으로 각각의 질화붕소에 변형률을 인가하고 이에 따른 전기적 변위와 응력을 산출하여 압전상수와 영률을 각각 예측하였다. 그 결과, BNNT의 압전상수는 반경이 증가함에 따라 점진적으로 감소하는 양상을 보였다. 반면 탄성계수의 경우 불연속적 구조를 가지는 질화붕소를 등가의 연속체 구조로 등가시키는 방법에 따라 증가 또는 감소하는 경향을 보였다. BNNT의 곡률변화에 따른 물성변화를 가상실험에 기반한 경험적 모델로 근사하기 위해 BNNT의 튜브반경-압전탄성물성 간 상관관계식을 제안하였다. 또한 BNNT의 반경변화에 따른 물성을 곡률의 관점에서 설명하기 위해, BNNT와 질화붕소 나노시트(BNNS)의 결합에너지와 탄성변형에 따른 원자간 결합길이 변화가 각각의 구조의 변형에너지 증가에 기여하는 정도를 상호 비교하였다.
본 연구는 남해안 연안에 방치되고 있는 굴패각을 세골재 크기의 5.0mm이하로 분쇄하여 실제 현장에서 사용가능한 세골재 대체재로 활용하여 굴패각을 사용한 콘크리트의 성질 및 제반 강도들에 대해 연구한 것이다. 이를 위해 기본 실험과 주요 변화 요인들에 대해 1,028개의 공시체 및 시험체를 제작 실험한 결과 굴패각을 사용한 콘크리트 제반 강도는 일반콘크리트 강도와 최대 10%정도 차이를 보였으며 세골재 대체재로서 우수한 굴패각 입도크기는 5.0mm이하를 균등하게 취한 경우로 약 30%까지는 대체 가능한 것으로 나타났다. 그리고 본 논문에서는 굴패각을 사용한 제반 콘크리트 강도상호 관계식들을 제시하였고 이의 탄성계수는 굴패각 대체율이 증가할수록 감소하였는데 대체율 10%까지는 거의 유사한 값을 보였다.
본 연구에서는 시공시 현장다짐관리에 있어 단위중량을 이용하는 기존의 방법 대신 탄성계수와 같은 역학적 특성을 이용하는 새로운 다짐관리기준 정립을 위한 현장시험방법을 제시하고자 한다. 이를 위하여 시험법이 간편하며, 활용성이 증가하고 있는 동적콘관입시험인 DCPT 측정시험이 노상토의 다짐품질관리의 적용이 가능한지를 검토하였다. DCPT 시험방법이 현장에서 다짐후 설계탄성계수를 추정할 수 있는지를 확인하기 위하여 실내토조시험, 현장시험을 실시하였고, 노상층의 DCPT, CBR, 회복탄성계수간의 상관관계를 분석하였다. 또한, 문헌조사 분석을 통하여 DCPT 시험간격을 제시하였다. 실내시험결과를 분석한 결과, DCPT 관입치 (PR) 값과 CBR값 간의 상관관계식에서는 Livneh 식이 가장 부합됨을 알 수 있었고, DCPT 시험을 통한 PR값을 국내외 탄성계수 추정식을 평가한 결과, 예측 $M_R$ 탄성계수 값과 부합하는 제안식으로는 George와 Pradesh의 식이 있었으며, FWD를 이용한 $M_R$ 제안식을 비교한 결과, Cudishala의 제안삭은 예측 $M_R$ 값보다 다소 크게 산정되며, Chen의 제안식의 경우 다소 작은 값을 보이고, 건설기술연구원의 제안식은 예측 $M_R$값에 과소 평가함을 알 수 있었다. 그러나 실제 차량이 유발하는 주행속도에 따른 축차응력과 구속응력으로부터 실내 $M_R$ 시험결과를 비교분석한 결과, 건기원 제안식이 가장 적합함을 알 수 있었다. DCPT 현장시험결과를 분석한 결과, 관입지점의 입도분포에 따라 PR 값에 오차가 생길 수 있음을 알 수 있었고, 오차를 감소하기 위한 DCPT 시험간격에 대한 추천값을 제시하였다. 현장시험결과를 분석한 결과 현장 다짐도를 만족하는 노상이라 하여도 노상 재료에 따라 평균 PR 값이 다르게 나타났으며, 특히 입경이 큰 재료일수록 평균 PR 값이 작음을 알 수 있었고, 현장함수비의 경우 다짐도에 미치는 영향은 상당히 크나, DCPT 시험에 있어서 현장함수비 변화는 평균PR값에 미치는 영향이 미미함을 알수 있었다.
Titanium and its alloys are widely used as implants in orthopedics, dentistry and cardiology due to their outstanding properties, such as high strength, high level of hemocompatibility and enhanced biocompatibility. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The aim of this study is to research Si and Mg doped hydroxyapatite film formation by plasma electrolytic oxidation. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. A Si and Mg coating was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.
In order for engineered tissues to find clinical utility, the engineered tissues must function appropriately. However, smooth muscle (SM) tissues engineered in vitro with a conventional tissue engineering technique may not exhibit contractile functions, because smooth muscle cells (SMCs) cultured in vitro typically revert from a contractile, differentiated phenotype to a synthetic, nondifferentiated phenotype and lose their ability to contract. SMCs in vivo typically reside in mechanically dynamic environments. We hypothesized that cyclic mechanical stretch induces the features of SMCs in in vitro engineered tissues to be similar to those of SMCs in native tissues. To test the hypothesis, aortic SMCs were seeded onto elastic, three-dimensional scaffolds and cultured in vitro under a cyclic mechanical stretching condition for 4 weeks. A significant cell alignment in a direction parallel to the cyclic stretching direction was found in the SM tissues exposed to cyclic stretching. The cellular alignment and alignment direction were consistent with those of native vascular SM tissues, in which SMCs in vivo align in the radial direction (parallel to stretching direction). In control tissues (SM tissues engineered without stretching), cells randomly aligned. The expression of SM ${\alpha}-actin$ and SM myosin heavy chain, phenotypic markers of SMCs in a contractile state, was upregulated in the stretched tissues by 2.5- and 2.0-fold, respectively, compared to SMCs in the control tissues. The cellular features of alignment and contractile phenotype of SMCs in the SM tissues engineered under a mechanically dynamic environment could allow the engineered SM tissues to exhibit contractile functions.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제26권4호
/
pp.373-382
/
2000
Temporomandibular disorders arised from joint itself was caused by inflammation or mechanical irritation of the retrodiskal tissues. Histologic changes of the retrodiskal tissues of temporomandibular joint(TMJ) internal derangement, such as inflammatory cell infiltration, hyalinization, myxoid change, fatty change, arterial obliteration, and so on, were reported, but relationships between magnetic resonance imaging(MRI) findings and histologic findings of the retrodiskal tissue were few reported. The purpose of this study was to find histologic changes of the retrodiskal tissues for status of joint and joint effusion in MRI of the temporomandibular joint which had surgical treatment. Materials were surgically treated 52 temporomandibular joints with internal derangement or osteoarthritis in TMJ clinic, Yongdong Severance Hospital. All joints were confirmed by magnetic resonance T1- and T2-weighted imagings bofere surgery. Status of joint was categorized by normal position, disc displacement with reduction, disc displacement without reduction, disc displacement without reduction associated with osteoarthrosis using preoperative MR T1-weighted images. Magnetic resonance evidence of joint effusion was observed in T2-weighted images and classified by its amount; degree 0(not observed), degree 1(small amount), degree 2(moderate amount), degree 3(large amount). Histologic features were observed whether the retrodiskal tissue has inflammatory cell infiltration, myxoid change, hyalinization, chondroid metaplasia and arterial obliteration. The distribution of elastic fibers were also observed. The results were as follows; 1. Inflammatory cell infiltration was not observed in any retrodiskal tissues. 2. MRI findings such as status of joint and evidence of joint effusion did not have significant relationship with myxoid change, hyalinization, chondroid metaplasia, arterial obliteration of the retrodiskal tissues. 3. Hyalinization and chondroid metaplasia were found in 8 joints(15.4%) and 5 joints(9.6%). All of them were found in disc displacement without reduction and disc displacement without reduction associated with osteoarthrosis. 4. Arterial obliteration was observed more frequently in disc displacement without reduction(55.6%) than disc displacement without reduction associated with osteoarthrosis(28.6%). Further studies with proper controls and more materials will be necessary.
The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.
본 연구에서는 복압력(abdominal pressure) 및 복근(abdominal musles)만을 제외(하중의 계산시 이들의 역활을 포함하였다.) 한 요추골 운동에 관계하는 모든 역 학적 요소를 포함시키고 해부학적으로 매우 충실한 실험용 광탄성 모델과 하중장치를 개발하여, 이러한 모델과 하중장치의 유효성을 임상의학적으로 규명 하는것을 본 연구 의 목적으로 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.