• Advances in nano research
• /
• 제16권2호
• /
• pp.111-125
• /
• 2024

Recently, a lot of research has been done on the analysis of axial vibrations of homogeneous and FG nanotubes (nanorods) with various aspects of vibrations that have been fully mentioned in history. However, there is a lack of investigation of the dynamic internal resonances of FG nanotubes (nanorods) between them. This is one of the essential or substantial characteristics of nonlinear vibration systems that have many applications in various fields of engineering (making actuators, sensors, etc.) and medicine (improving the course of diseases such as cancers, etc.). For this reason, in this study, for the first time, the dynamic internal resonances of FG nanorods in the simultaneous presence of large-amplitude size dependent behaviour, inertial and shear effects are investigated for general state in detail. Such theoretical patterns permit as to carry out various numerical experiments, which is the key point in the expansion of advanced nano-devices in different sciences. This research presents an AFG novel nano resonator model based on the axial vibration of the elastic nanorod system in terms of derivation from large-amplitude size dependent internal modals interactions. The Hamilton's Principle is applied to achieve the basic equations in movement and boundary conditions, and a harmonic deferential quadrature method, and a multiple scale solution technique are employed to determine a semi-analytical solution. The interest of the current solution is seen in its specific procedure that useful for deriving general relationships of internal resonances of FG nanorods. The numerical results predicted by the presented formulation are compared with results already published in the literature to indicate the precision and efficiency of the used theory and method. The influences of gradient index, aspect ratio of FG nanorod, mode number, nonlinear effects, and nonlocal effects variations on the mechanical behavior of FG nanorods are examined and discussed in detail. Also, the inertial and shear traces on the formations of internal resonances of FG nanorods are studied, simultaneously. The obtained valid results of this research can be useful and practical as input data of experimental works and construction of devices related to axial vibrations of FG nanorods.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• 대한토목학회논문집
• /
• 제44권1호
• /
• pp.11-17
• /
• 2024

제진 구조는 댐퍼라는 장치를 구조물에 장착시켜 지진에너지를 소산하는 내진설계이다. 지진피해를 저감하고자 하는 연구가 성행하고 있는 가운데 제진 구조는 댐퍼의 재료, 형상을 변경함으로써 기술을 발전시켜왔다. 하지만 댐퍼의 특성상 에너지를 소산하기 위해 재료에 발생하는 소성변형은 피할 수 없는 한계가 있다. 따라서 본 연구에서는 발생한 변형를 스스로 회복할 수 있는 초탄성 형상기억합금(Superelastic shape memory alloy, SSMA)을 활용하여 반영구적으로 사용할 수 있고 추가적인 긴장력을 적용하여 구조적 성능을 향상한 장수명 댐퍼를 제안하였다. 장수명 댐퍼의 거동 특성 분석을 위해 재료, 와이어 직경, 긴장력 유무의 설계 변수에 따라 유한요소해석을 진행하였고 응답 거동을 도출하여 하중 저항, 에너지 소산, 잔류변위 등의 특성을 분석하여 장수명 댐퍼의 성능적 우수성을 입증하였다.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.277-284
• /
• 2024

본 연구에서는 변압기 설계에 활용하기 위해 조화응답해석을 이용하여 소음저감 대책에 따른 소음 저감 예측방법을 제안한다. 변압기 부품들의 재질을 간단한 형상의 시편으로 제작하고, 실험과 해석의 모드 비교분석을 통해 실제 변압기를 구성하는 부품들의 동적 탄성계수를 규명하였다. 변압기의 유한요소모델을 구현하고 변압기의 가진력을 도출하여 조화응답해석을 수행하였다. 그리고 조화응답해석 결과에서 변압기의 음향파워레벨(Sound power level)을 이론적으로 도출하였다. 마지막으로 소음저감 대책을 수립하고, 적용 전·후에 따른 실험과 해석의 소음 저감량을 비교하였다. 대책별 소음저감 비교분석을 통해 실험과 해석의 경향이 일치하는 것을 확인하였다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.103-116
• /
• 2008

본 연구에서는 시공시 현장다짐관리에 있어 단위중량을 이용하는 기존의 방법 대신 탄성계수와 같은 역학적 특성을 이용하는 새로운 다짐관리기준 정립을 위한 현장시험방법을 제시하고자 한다. 이를 위하여 시험법이 간편하며, 활용성이 증가하고 있는 동적콘관입시험인 DCPT 측정시험이 노상토의 다짐품질관리의 적용이 가능한지를 검토하였다. DCPT 시험방법이 현장에서 다짐후 설계탄성계수를 추정할 수 있는지를 확인하기 위하여 실내토조시험, 현장시험을 실시하였고, 노상층의 DCPT, CBR, 회복탄성계수간의 상관관계를 분석하였다. 또한, 문헌조사 분석을 통하여 DCPT 시험간격을 제시하였다. 실내시험결과를 분석한 결과, DCPT 관입치 (PR) 값과 CBR값 간의 상관관계식에서는 Livneh 식이 가장 부합됨을 알 수 있었고, DCPT 시험을 통한 PR값을 국내외 탄성계수 추정식을 평가한 결과, 예측 $M_R$ 탄성계수 값과 부합하는 제안식으로는 George와 Pradesh의 식이 있었으며, FWD를 이용한 $M_R$ 제안식을 비교한 결과, Cudishala의 제안삭은 예측 $M_R$ 값보다 다소 크게 산정되며, Chen의 제안식의 경우 다소 작은 값을 보이고, 건설기술연구원의 제안식은 예측 $M_R$값에 과소 평가함을 알 수 있었다. 그러나 실제 차량이 유발하는 주행속도에 따른 축차응력과 구속응력으로부터 실내 $M_R$ 시험결과를 비교분석한 결과, 건기원 제안식이 가장 적합함을 알 수 있었다. DCPT 현장시험결과를 분석한 결과, 관입지점의 입도분포에 따라 PR 값에 오차가 생길 수 있음을 알 수 있었고, 오차를 감소하기 위한 DCPT 시험간격에 대한 추천값을 제시하였다. 현장시험결과를 분석한 결과 현장 다짐도를 만족하는 노상이라 하여도 노상 재료에 따라 평균 PR 값이 다르게 나타났으며, 특히 입경이 큰 재료일수록 평균 PR 값이 작음을 알 수 있었고, 현장함수비의 경우 다짐도에 미치는 영향은 상당히 크나, DCPT 시험에 있어서 현장함수비 변화는 평균PR값에 미치는 영향이 미미함을 알수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.195-195
• /
• 2016

Titanium and its alloys are widely used as implants in orthopedics, dentistry and cardiology due to their outstanding properties, such as high strength, high level of hemocompatibility and enhanced biocompatibility. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The aim of this study is to research Si and Mg doped hydroxyapatite film formation by plasma electrolytic oxidation. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. A Si and Mg coating was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Journal of Microbiology and Biotechnology
• /
• 제13권6호
• /
• pp.841-845
• /
• 2003

In order for engineered tissues to find clinical utility, the engineered tissues must function appropriately. However, smooth muscle (SM) tissues engineered in vitro with a conventional tissue engineering technique may not exhibit contractile functions, because smooth muscle cells (SMCs) cultured in vitro typically revert from a contractile, differentiated phenotype to a synthetic, nondifferentiated phenotype and lose their ability to contract. SMCs in vivo typically reside in mechanically dynamic environments. We hypothesized that cyclic mechanical stretch induces the features of SMCs in in vitro engineered tissues to be similar to those of SMCs in native tissues. To test the hypothesis, aortic SMCs were seeded onto elastic, three-dimensional scaffolds and cultured in vitro under a cyclic mechanical stretching condition for 4 weeks. A significant cell alignment in a direction parallel to the cyclic stretching direction was found in the SM tissues exposed to cyclic stretching. The cellular alignment and alignment direction were consistent with those of native vascular SM tissues, in which SMCs in vivo align in the radial direction (parallel to stretching direction). In control tissues (SM tissues engineered without stretching), cells randomly aligned. The expression of SM ${\alpha}-actin$ and SM myosin heavy chain, phenotypic markers of SMCs in a contractile state, was upregulated in the stretched tissues by 2.5- and 2.0-fold, respectively, compared to SMCs in the control tissues. The cellular features of alignment and contractile phenotype of SMCs in the SM tissues engineered under a mechanically dynamic environment could allow the engineered SM tissues to exhibit contractile functions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권4호
• /
• pp.373-382
• /
• 2000

Temporomandibular disorders arised from joint itself was caused by inflammation or mechanical irritation of the retrodiskal tissues. Histologic changes of the retrodiskal tissues of temporomandibular joint(TMJ) internal derangement, such as inflammatory cell infiltration, hyalinization, myxoid change, fatty change, arterial obliteration, and so on, were reported, but relationships between magnetic resonance imaging(MRI) findings and histologic findings of the retrodiskal tissue were few reported. The purpose of this study was to find histologic changes of the retrodiskal tissues for status of joint and joint effusion in MRI of the temporomandibular joint which had surgical treatment. Materials were surgically treated 52 temporomandibular joints with internal derangement or osteoarthritis in TMJ clinic, Yongdong Severance Hospital. All joints were confirmed by magnetic resonance T1- and T2-weighted imagings bofere surgery. Status of joint was categorized by normal position, disc displacement with reduction, disc displacement without reduction, disc displacement without reduction associated with osteoarthrosis using preoperative MR T1-weighted images. Magnetic resonance evidence of joint effusion was observed in T2-weighted images and classified by its amount; degree 0(not observed), degree 1(small amount), degree 2(moderate amount), degree 3(large amount). Histologic features were observed whether the retrodiskal tissue has inflammatory cell infiltration, myxoid change, hyalinization, chondroid metaplasia and arterial obliteration. The distribution of elastic fibers were also observed. The results were as follows; 1. Inflammatory cell infiltration was not observed in any retrodiskal tissues. 2. MRI findings such as status of joint and evidence of joint effusion did not have significant relationship with myxoid change, hyalinization, chondroid metaplasia, arterial obliteration of the retrodiskal tissues. 3. Hyalinization and chondroid metaplasia were found in 8 joints(15.4%) and 5 joints(9.6%). All of them were found in disc displacement without reduction and disc displacement without reduction associated with osteoarthrosis. 4. Arterial obliteration was observed more frequently in disc displacement without reduction(55.6%) than disc displacement without reduction associated with osteoarthrosis(28.6%). Further studies with proper controls and more materials will be necessary.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.88-91
• /
• 2002

The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.723-736
• /
• 1992

본 연구에서는 복압력(abdominal pressure) 및 복근(abdominal musles)만을 제외(하중의 계산시 이들의 역활을 포함하였다.) 한 요추골 운동에 관계하는 모든 역 학적 요소를 포함시키고 해부학적으로 매우 충실한 실험용 광탄성 모델과 하중장치를 개발하여, 이러한 모델과 하중장치의 유효성을 임상의학적으로 규명 하는것을 본 연구 의 목적으로 한다.