• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.59-66
• /
• 2018

본 논문에서는 수치해석을 사용하여 반도체용 패키지에 적용된 인쇄회로기판 (PCB(printed circuit board)) 구조를 다층 구조의 소재 특성을 모델링한 것과 단일 구조라고 가정한 모델링을 적용하여 warpage를 해석함으로써 단일 구조 PCB 모델링의 유용성을 분석하였다. 해석에는 3층과 4층 회로층을 갖는 PCB가 사용되었다. 또한 단일 구조 PCB의 재료 특성값을 얻기 위해 실제 제품을 대상으로 측정을 수행하였다. 해석 결과에 의하면 PCB를 다층 구조로 모델링한 경우에 비해 단일 구조로 모델링한 경우에 warpage가 증가하여 PCB 구조의 모델링에 따른 warpage 분석결과가 분명한 유의차가 있었다. 또한, PCB의 회로층이 증가하면 PCB의 기계적 특성인 탄성계수와 관성모멘트가 증가하여 패키지의 warpage가 감소하였다.

• 산업융합연구
• /
• 제18권6호
• /
• pp.99-105
• /
• 2020

일반적으로 모발에 웨이브를 형성시키기 위해서 시술하는 퍼머넌트 웨이브 중에서도 가장 자연스럽고 탄력있는 웨이브를 얻기 위해서 열을 이용한 시술을 선호한다. 이에 본 연구는 퍼머넌트 웨이브 시술시 사용되는 로드의 열 형성도에 따라서 모발에 미치는 표면적인 모발의 손상도를 주사전자현미경을 활용하여 측정하였다. 로드의 열 형성이 웨이브에 미치는 영향력을 알아보기 위해 열 로드에서 전달되는 온도를 측정하고 웨이브를 시술하여 웨이브 된 둥근 모양의 형태대로 모발을 절단한 후 처치를 하였다. 주사전자현미경 관찰에서 뜨거운 열이 직접적으로 닿은 부분은 모발이 끊어진 것을 확인할 수 있었는데 끊어진 면이 매끄러운 현상을 보였다. 본 연구의 결과로는 퍼머넌트 웨이브시에 사용되는 열 로드는 열 전달이 로드 전체에 고르게 전달되는 특성을 가지고 있는 재질을 활용하고 로드의 구조 또한 중요함을 인식하고 미용 업계에서 활발한 연구가 이뤄져야 할 것으로 사료된다.

• 한국항공우주학회지
• /
• 제48권12호
• /
• pp.961-968
• /
• 2020

본 연구에서는 미시역학 전산 모형을 통해 열 보호 시스템에 사용되는 내열 코팅 재료의 유효 열전도도와 탄성 계수를 산출하고 분석하였다. 상용 프로그램 Simpleware를 이용하여 HfC로 코팅된 탄소/탄소 복합재료의 삼차원 전산 모형을 생성한 후 유한요소 해석을 수행하였다. 유효 물성의 경향을 확인하기 위해 코팅층의 기공도와 두께 변화를 고려하였다. 또한, 실제 시편을 제작하여 실험에서 온도에 따라 측정된 열전도도와 해석에서 산출된 열전도도를 서로 비교하였으며 해석 결과가 측정값에 근접하였다. 이를 통해 내열 코팅 재료의 유효 물성을 산출하는데 있어서 미시역학 전산 해석이 적절함을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.396-407
• /
• 2021

PURPOSE. Zirconia has exceptional biocompatibility and good mechanical properties in clinical situations. However, finite element analysis (FEA) studies on the biomechanical stability of two-piece zirconia implant systems are limited. Therefore, the aim of this study was to compare the biomechanical properties of the two-piece zirconia and titanium implants using FEA. MATERIALS AND METHODS. Two groups of finite element (FE) models, the zirconia (Zircon) and titanium (Titan) models, were generated for the exam. Oblique (175 N) and vertical (175 N) loads were applied to the FE model generated for FEA simulation, and the stress levels and distributions were investigated. RESULTS. In oblique loading, von Mises stress values were the highest in the abutment of the Zircon model. The von Mises stress values of the Titan model for the abutment screw and implant fixture were slightly higher than those of the Zircon model. Minimum principal stress in the cortical bone was higher in the Titan model than Zircon model under oblique and vertical loading. Under both vertical and oblique loads, stress concentrations in the implant components and bone occurred in the same area. Because the material itself has high stiffness and elastic modulus, the Zircon model exhibited a higher von Mises stress value in the abutments than the Titan model, but at a level lower than the fracture strength of the material. CONCLUSION. Owing to the good esthetics and stress controllability of the Zircon model, it can be considered for clinical use.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.93-102
• /
• 2022

In this study, limestone powder (LS) and fly ash (FA) were used as powder materials in self-compacting concrete (SCC) in increasing quantities in addition to cement, so that the two powders commonly used in the production of SCC could be compared in the same study. Considering the reduction of the maximum aggregate size in SCC, 10 mm or 16 mm was selected as the coarse aggregate size. The properties of fresh concrete were determined by slump flow (including T₅₀₀ time), V-funnel and J-ring experiments. The experimental results showed that as the amount of both LS and FA increased, the slump flow also increased. The increase in powder material had a negative effect on V-funnel flow times, causing it to increase; however, the increase in FA concretes was smaller compared to LS ones. The increase in the powder content reduced the amount of blockage in the J-ring test for both aggregate sizes. As the hardened concrete properties, the compressive and splitting strengths as well as the modulus of elasticity were determined. Longitudinal and transverse deformations were measured by attaching a special frame to the cylindrical specimens and the values of Poisson's ratio, initiation and critical stresses were obtained. Despite having a similar W/C ratio, all SCC exhibited higher compressive strength than NVC. Compressive strength increased with increasing powder content for both LS and FA; however, the increase of the FA was higher than the LS due to the pozzolanic effect. SCC with a coarse aggregate size of 16 mm showed higher strength than 10 mm for both powders. Similarly, the modulus of elasticity increased with the amount of powder material. Inelastic properties, which are rarely found in the literature for SCC, were determined by measuring the initial and critical stresses. Crack formation in SCC begins under lower stresses (corresponding to lower initial stresses) than in normal concretes, while critical stresses indicate a more brittle behavior by taking higher values.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.204-211
• /
• 2022

본 연구에서는 복합말뚝의 장점을 활용하고 CFT말뚝의 단점인 부식에 대한 문제점을 해결할 수 있는 모델로 중공형 콘크리트 충전 FRP Tube 말뚝(Hollow Concrete Filled FRP Tube Pile, HCFFT말뚝)을 제시하였고, 수치해석 모델을 개발하여 거동을 분석하였다. 콘크리트가 손상 소성 거동, 강재가 항복 소성 거동, FRP가 탄성 거동을 한다는 것을 고려하여 변형률적합법을 적용하고, 중립축으로부터의 거리에 따른 FRP Tube 단면의 변화를 고려하여 HCFFT말뚝의 휨 강도 산정식을 제안하였다. 휨 강도 산정식과 수치해석 결과, 실험결과를 비교 분석하여 적정성을 검증하였다. 본 연구 결과는 FRP를 이용한 다양한 HCFFT말뚝의 최적설계에 기초자료로서 활용될 수 있을 것으로 판단된다.

• Advances in materials Research
• /
• 제11권4호
• /
• pp.299-330
• /
• 2022

This review article highlights the physical, mechanical, and chemical properties of coconut shells, and the fresh and hardened properties of the coconut shell concrete are summarized and were compared with other types of aggregates. Furthermore, the structural behavior in terms of flexural, shear, and torsion was also highlighted, with other properties including shrinkage, elastic modulus, and permeability of the coconut shell concrete. Based on the reviewed literature, concrete containing coconut shell as coarse aggregate with normal sand as fine showed the 28-day compressive strength between 2 and 36 MPa with the dried density range of 1865 to 2300 kg/m³. Coconut shell concretes showed a 28-day modulus of rupture and splitting tensile strength values in the ranges of 2.59 to 8.45 MPa and 0.8 to 3.70 MPa, respectively, and these values were in the range of 5-20% of the compressive strength. The flexural behavior of CSC was found similar to other types of lightweight concrete. There were no horizontal cracks on beams which indicate no bond failure. Whereas, the diagonal shear failure was prominent in beams with no shear reinforcements while flexural failure mode was seen in beams having shear reinforcement. Under torsion, CSC beams behave like conventional concrete. Finally, future recommendations are also suggested in this study to investigate the innovative lightweight aggregate concrete based on the environmental and financial design factors.

• 복식문화연구
• /
• 제30권6호
• /
• pp.799-813
• /
• 2022

The environment has increasingly attracted attention and fashion brands need to use new growth models by developing eco-friendly products, along with the drastic climate change. This study drew design guidelines from the factors of clothing disposal and reuse to propose ways to extend the longevity of clothing. It sets the design goals for the longevity extension of clothing as flexibility, originality, durability, and adjustability and drew a specific design guideline. The design methods used to achieve such goals are as follows. First, the design that is flexible in terms of physical changes needs to increase its activity and to be changeable, by applying pleats, rubber bands and elastic materials to the parts with many physical changes and movements. Second, it is necessary to reinforce the brand identity, create design that is flexible in terms of fashion and design very rare and attractive products, for the goal of original design beyond fashion. Third, it is necessary to increase the quality of clothing and improve the durability which can be decreased by washing and wearing. Fourth, it is necessary to create the design that can produce various styles, preserve the state of clothing and maintain its hygienic conditions by using removable detailed designs, shape-transformation designs and the designs which can be adjusted to climate changes and states, for the goal of adjustable design with better functionality. The findings provide ideas for fashion experts to pay more attention to the extending the longevity of clothing products and to develop eco-friendly designs and strategies.

• 열처리공학회지
• /
• 제36권3호
• /
• pp.121-127
• /
• 2023

When high carbon steel is heated in an appropriate austenizing temperature range and subjected to austempering, the size and shape of lamellar structure can be controlled. The high carbon steel sheet having the pearlite structure has excellent elastic characteristics because it has strong restoring force when properly rolled, and is applied in a process known as patenting-process using lead bath. In the case of isothermal treatment using lead-medium, it is possible to quickly reach a uniform temperature due to high heat transfer characteristics, but it is difficult to replace it with process technology that requires treatment to remove harmfulness lead. In this study, we intend to develop fluidization technology using garnet powder to replace the lead medium. After heating the high-carbon steel, the cooling rate was changed by compressed air to the vicinity of the nose of the continuous cooling curve, and then maintained for 90 s and then exposed to room temperature. The microstructure of the treated specimens were analyzed and compared with the existing products treated with lead bath. The higher the flow rate of compressed air, the faster the cooling rate to the pearlite transformation temperature, so lamellar spacing decreases and the hardness tends to increase.

• Composites Research
• /
• 제19권2호
• /
• pp.28-34
• /
• 2006

고온자전합성법과 스파크 플라즈마 소결법으로 여러 가지 $TiB_2$ 함유량을 갖는 $Cu-TiB_2$ 금속복합재료를 제조하였다. 점용접 전극과 미끄럼 접촉재로 사용하기 위해 인장특성, 경도, 마모저항 등의 물성치를 조사하였다. 강화재의 형상, 크기, 부피분율 등에 의해 복합재료의 특성이 달라지므로 유효물성치를 예측하기 위한 모델링이 필수적이다. 유한요소해석결과 유효탄성 계수가 실험치와 일치하는 것을 확인하였고 Eshelby 모델, Mori-Tanaka의 평균장 이론이 결합된 Eshelby 모델, 혼합법칙 등으로 복합재료의 탄성계수를 예측한 결과 Mori-Tanaka의 평균장 이론이 결합된 Eshelby 모델이 실험치를 사장 잘 묘사하는 것으로 나타났다.