• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.633-644
• /
• 2013

This study evaluates wind farm efficiency at Haengwon in Jeju Island. The actual energy production at Haengwon wind farm is compared with the estimated energy production based on Korean wind map which is developed at the National Institute of Meteorological Research/KMA. The validation of wind map at Gujwa located near the Haengwon wind farm shows that the wind speed is overestimated. The diurnal variation of wind speed shows a maximum value in the afternoon due to the effect of sea-land breeze. The ratio of the actual energy production at Haengwon wind farm and the estimated energy production based on the Korean wind map is 24.8%, while the distribution of energy frequency is similar each other. The difference of energy production is caused by mechanical error of the turbine and the overestimation of the simulated wind map. This study will contribute to the repowering of turbines for improving the efficiency of wind farm in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.259-261
• /
• 2010

This paper describes the results and possibility of continuous cadastral map compilation with digital camera image. A high quality serial cadastral map can be produced and work efficiency can be increased with using digital aero-photogrammetry when edge matching method could be used to match digital cadastral map.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.778-781
• /
• 2004

Recently, one of the reason of noise problems is urban planning has little concern about noise. For solving noise problems, strategic action is needed during urban planning. The noise map is one of the solution for concerning about noise in urban planning and EC has been studied the noise map for the strategic purpose since 1970s. The noise map is powerful tool for predicting sound level, calculating exposure population and evaluating the efficiency of the noise reduction plan. In Korea, The noise map is a unfamiliar field. The experience is few for noise-mapping and the noise mapping procedure has not been standardization yet. For activation of noise map, the study about fundamental problems of collecting data md noise-mapping procedure must be need. This paper is for studying on the noise-mapping procedure in Korea and application of noise map.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.48-53
• /
• 2012

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.69-74
• /
• 2008

Robotics and artificial intelligence are components of IT that involve networks, electrical and electronic engineering, and wireless communication. We consider an algorithm for efficient navigation by building a precise map in a multi-robot system under conditions of limited and unlimited communications. The basis of the navigation algorithm described in this paper is a wave algorithm, which is effective in obtaining an accurate map. Each robot in a multi-robot system has its own task such as building a map for its local position. By combining their data into a shared map, the robots can actively seek to verify their relative locations. Using shared maps, they coordinate their exploration strategies to maximize exploration efficiency. To prove the efficiency of the proposed technique, we compared the final results with the results in $Burgard^{8}$ and $Stachniss.^{9-10}$ All of the simulation comparisons, which are shown as graphs, were made in four different environments.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.45-50
• /
• 2008

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.268-274
• /
• 1992

An attempt to improve the second harmonic generation (SHG) efficiency of MAP (methyl (2,4-dinitrophenyl)aminopropanoate) by modifying the substituents on the amino group of MAP is described. Several MAP analogues have been prepared using optically active amino acids alanine, phenylalanine and serine, and their SHG efficiencies measured. None of the MAP analogues exhibited SHG efficiencies as high as that of MAP. X-ray crystal structures of three MAP analogues have been determined. In the crystal structures of two of them, which were the derivatives of phenylalanine, two crystallographically-independent molecules existing in the asymmetric unit are aligned almost antiparallel. These structures are consistent with the very low SHG efficiencies of these compounds. On the other hand, the crystal structure of a serine derivative reveals substantial alignment of the dinitroaniline chromophore along the polar axis. However, the angle of 86.2° between the molecular charge tranfer axis and the polar axis of the crystal is still far away from the optimum value of 54.74° for the phase-matchable SHG. The structure is consistent with the SHG efficiency of this compound which is much higher than those of the phenylalanine derivatives but still lower than that of MAP. This study demonstrates the importance of the orientation of molecules in the crystal lattice in determining secod-order nonlinear optical properties of crystalline materials.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.2
• /
• pp.101-107
• /
• 2014

Mobile robots use an environment map of its workspace to complete the surveillance task. However grid-based maps that are commonly used map format for mobile robot navigation use a large size of memory for accurate representation of environment. In this reason, grid-based maps are not suitable for path planning of mobile robots using embedded board. In this paper, we present the path planning algorithm that produce a secure path rapidly. The proposed approach utilizes a hybrid map that uses less memory than grid map and has same efficiency of a topological map. Experimental results show that the fast path planning uses only 1.5% of the time that a grid map based path planning requires. And the results show a secure path for mobile robot.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.68-82
• /
• 2017

Nowadays, geographic information system (GIS) is developed and implemented in many areas. A huge volume of vector map data has been accessed unlawfully by hackers, pirates, or unauthorized users. For this reason, we need the methods that help to protect GIS data for storage, multimedia applications, and transmission. In our paper, a selective encryption method is presented based on vertex randomization and hybrid transform in the GIS vector map. In the proposed algorithm, polylines and polygons are focused as the targets for encryption. Objects are classified in each layer, and all coordinates of the significant objects are encrypted by the key sets generated by using chaotic map before changing them in DWT, DFT domain. Experimental results verify the high efficiency visualization by low complexity, high security performance by random processes.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.13-21
• /
• 2009

National wind atlas of Korea requires effective database management because it has been constructed by 5-year long-term time-series numerical wind simulation. Therefore, database of the national wind map has been developed to increase data structure efficiency using IDL scientific programming language which has outstanding feature in mega-capacity numerical dataset. Visualization module also has been developed under IDL environment and it is anticipated to maximize post processing efficiency and applicability of the national wind map especially in the standing points of researchers and developers.