• Fibers and Polymers
• /
• 제7권1호
• /
• pp.73-78
• /
• 2006

The ability to absorb liquid and the dust removal performance are important factors for wiping cloths used to remove contaminants. We have developed a method that can determine the contaminant removal performance of wiping cloths. In the gravimetric method, experimental errors are unavoidable because the contaminant plate is much heavier than the contaminant material. However, we used image analysis to reduce the experimental errors, and did not use the heavy contaminant plate. The correlation coefficient between the image. analysis and the gravimetric methods was very high, at R=0.97, with a significance level of 95%. From the correlation analysis and empirical data, the image analysis method is a useful tool for measuring wiping efficiency. The wiping efficiency measured using image analysis has a close relationship to the wiping speed, viscosity of the contaminant, and wiping pressure, at the significance level of 95%.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.109-116
• /
• 2004

Normally easy task of plat in urban architecture is that using underground full of activities for increase building site efficiency. Especially for using underground space for the parking lot. Also utilize underground is more increase for fulfill requirement in modern society considered with environmental friendly architecture. The primary objective of this study is to apply analyzed formal foundation type for selecting the optimum type of parking lots considered with structural stability, economical efficiency, construction efficiency, construction duration. This study aim to on criteria decided through the questionaries for the selection considered with in the scale of second stories parking lots underground, parking volume is 80 and reinforced concrete structure. The bearing capacity is 6～8m and downward from surface, healthy ground bearing capacity is 40 t/m2. This study comparative analysis and discuss economical efficiency, construction efficiency, construction duration based constructivist stability which applied Single foundation, Mat foundation, Drop Mat foundation. The result of this study is as follows: First, the result of economical efficiency is that on the basis of single foundation, Drop Mat foundation is 1.88, Mat foundation 2.04 as a comparative analysis on the basis of total construction cost included material cost, labor coast and machinery cost. Second, the result of construction efficiency order is single foundation, Drop Mat foundation, Mat foundation as a comparative analysis on the based connected characteristics. Third, the result of construction duration is that on the basis of Mat Foundation, Drop Mat foundation is 1.33, single foundation is 1.87 as a comparative analysis Critical Path. Forth, Each foundational type characteristics order through the matrix method is that overall each formal type of foundation contraries at economical efficiency and construction efficiency, construction duration. Also expect contradiction between engineers and owners due to engineer pursuit construction duration and ewer to begin with economical efficiency. Fifth, The selection of suitable foundation formal type needs that based consider project characteristic and field condition as according to above result of a comparative analysis. As a result, a comparative analysis economical efficiency, construction efficiency, construction duration of Mat foundation, Drop Mat foundation, single foundation with 3Bay reinforced structure underground parking lots on the healthy ground.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2007년도 추계학술대회
• /
• pp.679-684
• /
• 2007

This paper proposes a scheme to estimate the technical efficiency of trucks in logistics as performance measure by Data Envelopment Analysis (DEA). The result of technical efficiency estimation shows that there exists a substantial opportunity for improvement in technical efficiency of trucks and also the heterogeneity in the technical efficiency among trucks.

• 기술혁신연구
• /
• 제13권2호
• /
• pp.207-222
• /
• 2005

A prerequisite for making R&D more productive is to able to measure its productivity. Most of the previous studies on this topic have attempted to measure R&D productivity at the firm or industry levels. In this study, however, R&D productivity is measured at the national level to provide R&D policy implications, particularly for Asian countries. Contrary to the previous studies where total factor productivity was adopted, this study employs the data envelopment analysis (DEA) approach to measure R&D productivity. DEA is a multi-factor productivity analysis model for measuring the relative efficiency of each Decision Making Unit (DMU). In addition to the basic DEA model that includes all inputs and outputs, five additional models are constructed by combining single input with all outputs and single output with all inputs in order to measure specialized R&D efficiency. In this study, the twenty-seven countries are classified into four clusters based on the output-specialized R&D efficiency: inventors, merchandisers, academicians, and duds. Then, the characteristics of the Asian countries with respect to R&D efficiency are identified. It is found that Singapore ranks high in total efficiency, and Japan in patent-oriented efficiency. Meanwhile, China, Korea, and Taiwan are found to be relatively inefficient in R&D. We expect that the findings from this study will be able to provide directions for R&D policy-making of the Asian countries.

• 가정∙방문간호학회지
• /
• 제19권1호
• /
• pp.11-18
• /
• 2012

Purpose: The aim of this study is to evaluate the efficiency of the outpatient clinics in a hospital, using DEA. Methods: Data were collected using an activity-based costing system, medical information system, and annual reports of customer satisfaction management team of a general hospital in a city. The input variables were the number of doctors, the number of nurses, and the number of staffs. The output variables were the number of treatment times, the number of outpatient clinic patients, the total profits from outpatient clinic, the patient's satisfaction score, and the number of re-visit appointments. EMS Window version 3.1 was used to measure the efficiency score and benchmarking analysis. Results: The average efficiency score of 24 outpatient clinics was about 82.01%. Thirteen outpatient clinics had 100% efficiency score among them. The lowest efficiency score was 57.56%. Conclusion: According to these results, we found that, generally, outpatient clinics were operated very efficiently. However, some outpatient clinics had low efficiency and they needed specialized outcome improvement strategies. To increase the efficiency of inefficient outpatient clinics, we will recommend using results of DEA, as a benchmark point of the most efficient outpatient clinics.

• 산업공학
• /
• 제22권4호
• /
• pp.336-346
• /
• 2009

One of primary assumptions on DEA is that all DMUs for evaluation should be homogeneous. In comparative analysis among DMUs with relative efficiency measurement, it should be evaluated under identical conditions by ruling out external environmental influences. In this study, a measurement of innovation efficiency using the three-stage approach is performed. The approach employs DEA to measure relative efficiency and Tobit regressions to control external variables affecting innovation activity. The approach applied to firms in Korean Innovation Survey: Service Sector 2003 and 2006. Final efficiency scores of the approach represent net efficiency of the innovation. This study found that there is a increasing on technical efficiency of third stage, and it has difference with first stage significantly. Besides, a decrease on standard deviation of third stage is found. It means DMUs biased lower due to unfavorable condition and ones biased higher due to favorable condition are fallen into an identical operating environment through the approach. A measurement of net efficiency, excluding external effects, ensures the homogeneity of DMUs so that improves the reliability in terms of its analysis results. This study is expected to provide a direction and to be a valuable reference to further evaluation of innovation performance in Korean service sector.

• 상하수도학회지
• /
• 제35권2호
• /
• pp.121-133
• /
• 2021

This study set up the estimates of leakage management efficiency evaluation and leakage management goal that could be used in local water distribution networks efficiency business and modernization business. The data were analyzed using data envelopment analysis and multiple regression analysis. To this end, with leakage management input indices concerning leakage reduction activities (e.g., aged pipe replacement, water meter replacement, leakage restoration, and leakage detection) and leakage management calculation indices (e.g., the increase of revenue water ratio and the reduction of leakage ratio), the data on 22 K-water consignment local water supply systems were analyzed for the years from 2004 through 2018. Using the results of efficiency analysis by data envelopment analysis, the other DMUs (Decision Making Unit) benchmarked the DMU with the highest efficiency to maximize the leakage management efficiency for all DMUs. Through this, leakage management goal estimates were drawn with the input indices of four leakage reduction activities and calculation indices of the increase of revenue water ratio and the reduction of leakage ratio by multiple regression analysis for each group based on the revenue water ratio and leakage ratio. The correlation coefficients of the leakage management goal estimate for the criteria for the revenue water ratio amounted to 0.553 and 0.771. The correlation coefficients of the leakage management goal estimate for the criteria for leakage ratio were 0.397 and 0.865. Accordingly, we estimated the quantity and priority of four leakage reduction activities for the target leakage ratio and revenue water ratio.

• 한국콘텐츠학회논문지
• /
• 제15권5호
• /
• pp.475-487
• /
• 2015

본 연구에서는 부트스트랩 DEA를 이용하여 2013년 14개 공기업의 경영 효율성을 분석하였다. 또한 단절회귀분석을 이용하여 부트스트랩 편의조정 효율성에 영향을 미치는 요인을 분석하였다. 본 연구를 통해 도출된 결과와 시사점을 정리하면 다음과 같다. 첫째, 부트스트랩 DEA모형을 적용한 효율성 분석결과에 따르면 평균 기술효율성이 0.3182, 평균 순수기술효율성이 0.4994, 평균 규모효율성이 0.6585로 나타났으며, 기술비효율성의 주된 원인이 순수기술비효율성에 기인하는 것으로 분석되었다. 둘째, CRS 가정과 VRS 가정하의 일반 DEA모형을 적용한 TE와 부트스트랩 DEA모형을 적용한 TE 순위간에는 유의한 차이가 없는 것으로 나타났다. 셋째, 비효율원인 분석에서는 평가대상 14개 기관 중 11개 기관의 비효율원인이 순수기술에 더 크게 기인하고 있고, 3개 기관이 규모효율에 의해 비효율이 나타나는 것으로 분석되었다. 넷째, 단절회귀분석에서는 규모효율성에 영향을 미치는 요인으로 유의수준 10%에서 인건비, 영업이익, 매출액, 자기자본수익률, 종원원수 순으로 나타났다.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.51-60
• /
• 2012

Optimization procedures of performance analysis for ORC(Organic Rankine Cycle) system are established to the characteristics of low temperature heat sources such as open-type and closed-type. Effective heat recovery and heat extraction related to maximum power of the cycle as well as heat quality and thermal efficiency must be considered in the case of the open-type low temperature heat source. On the other hand, in the case of the closed-type low temperature heat source, only thermal efficiency is important due to constant heat input. In this study, thermal efficiency and exergy efficiency representing a level of close to Carnot cycle are studied, as useful index for the optimization of the ORC system. To validate the results of cycle analysis, those are compared with appropriate experimental data of ORC system as a thermal efficiency point of view.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.555-564
• /
• 2020

The purpose of this study is to analyze the efficiency of research institutes of futures companies, and to promote the development of futures market and real economy. This study employs DEA-solver software to conduct super-efficiency data envelopment analysis (SE-DEA), and also selects 40 representative futures research institutes in China as decision-making units (DMUs). For data of input and output indicators, we collect from the China Futures Association, Futures Daily, Hexun.com and Webstock.com respectively, and the time duration is the 103 trading days between from October 2019 to February 2020. Then the indicator for the strategy accuracy rate is calculated separately by analyzing the strategies published by each DMUs in public media. In conclusions, most institutes have excessive investment in human resources, and also have insufficient strategy accuracy rate and insufficient published research reports. The findings of this study suggest that Chinese futures companies need to improve the efficiency of research institutes, and better meet the demand of the financial market. In fact, the analysis of the efficiency of the futures company research institute has not been found in the literature worldwide, Application of DEA model in efficiency analysis of securities and futures research institutions and establishment of indicators are the innovations of this paper.