• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.545-553
• /
• 2020

Although networking behavior is an effective job search method to students, far too little attention has been paid to mechanisms explaining the antecedents and networking behavior. The goal of this study was to demonstrate the effect of the HEXACO personality dimensions on graduated students' job search networking behavior through their network size. A survey of 773 participants was conducted to assess personality traits, network size, and networking behavior. All constructs in the study were measured by 5-point Likert scales. This study employed a structural equation model to examine the proposed conceptual model and the correlations among variables. Results showed that the personality of emotionality negatively influence students' network size, while extraversion and agreeableness are positively associated with the scope of their social network. Second, the findings confirmed that network size is directly related to the level of looking-for job behavior, particularly networking behavior. Finally, our results explored that network size played the mediating effect on how personality traits affect networking behavior. These findings suggest that network size is a dynamic mechanism that helps to understand the correlation between personality traits and job search networking behavior. The theoretical and practical implication of the study, as well as the future research direction were discussed.

• Journal of Korean Academy of Nursing
• /
• v.38 no.2
• /
• pp.204-216
• /
• 2008

Purpose: Meta-analysis of this study was to analyze the character of adolescent smoking cessation programs, to calculate the effect size according to variables and to compare the weighted mean effect sizes on adolescent smoking cessation programs in Korea. Methods: Twenty two studies for meta-analysis were selected from dissertations, theses, articles and research papers that had been published from 1995 to 2003. The selected studies had a randomized or nonequivalent control group in a pretest-post test design and had reported statistical value to calculate the effect size. Results: The mean number of sessions was 6.5. The education time per each session varied from 40 to 150 min and the most applied theories were Bandura's social-cognitive theory and the cognitive-behavioral theory. Smoking-knowledge, smoking-attitudes and smoking-amount showed high effects on the first post test after mediating adolescent smoking cessation programs according to the criteria of Cohen. The effect size of urine-cotinine found no homogeneity on the first post test, but it was significantly effective on the second post test. Conclusion: Adolescent smoking cessation programs analyzed in this study were relatively effective in smoking abstinence.

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.201-207
• /
• 2008

In this study, three Dimensional CFD simulations were carried out to investigate the effective smoke extraction system in bi-directional road tunnel fires using FLUENT. Characteristics of transverse system with big size extraction port or with uniform extraction port, semi-transverse system and longitudinal system for smoke extraction system were analyzed. Air velocity, port size, and operating method were used with variable. Distributions of smoke spread, CO was analyzed. As a result, the transverse ventilation system with big size port was found to be more effective than the uniform ports for bi-directional road tunnel.

• Journal of the Korean housing association
• /
• v.5 no.2
• /
• pp.99-108
• /
• 1994

The purpose of this study was to present basic data for better space plan of the apartment housing. It attempted to examine the possession and space usage of furniture and housing goods in three type floor plan. It also studied in relation to socidemographic variables and physical variables. The major findings were as follows :1) Housewife age, educational level, family income, number of family members were affected variables to the possession of housing goods and furniture except furniture possession to housewife age.2) It appeared similarity in the furnishing of housing goods and furniture in case of same floor plan.3) Generally, the space of living room was used often in furnishing of furniture and housing goods. 4) Linear arrangement of sofa set and corner arrangement of Anbang furniture are a tendency to get a effective space for activities in living room.5) The size of floor plan space was the most powerful variable to explain the possession and space usage of housing goods and furniture.6) The scarce of space result in pressing the household living space hard. The storage space should be planned and chosen after consideration of human factors according to the tastes, character of the users, and the space factors according to the composition of unit plan and the size of each living space. In case of the small size plan, particularly, it needed to the Built-in furniture as a effective method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.231-237
• /
• 2006

This paper proposes an effective drive of high intensity discharge (HID) lamp ballast for cars. All control functions of the proposed ballast are implemented using a low-cost single chip microcontroller, PIC16C73 to optimize the total system size and to minimize cost through minimization of total component number. The proposed ballast generates high open-circuit voltage to ignite the lamp and is controlled to supply effectively the power required to shorten warm-up period after the breakdown. The DC-DC converter of the DC-AC converter part of the ballast utilizes the flyback converter topology that can minimize component number. Also, because to more minimize the ballast size, the transformer size must be minimized, for this, PWM (Pulse Width Modulation) pulses are generated with high frequency using the PWM module of the microcontroller. An analysis for this is explained, briefly. As if the operation of the lamp and ballast arrives at steady-state, then the ballast must AC-control the lamp, for this, the microcontroller utilizes the other PWM module. And the part related to the igniter is explained, briefly. It is shown through experimental results that the controller of the proposed ballast has good performance for the HID lamp for cars.

• Journal of Korean Society on Water Environment
• /
• v.20 no.4
• /
• pp.370-375
• /
• 2004

Synthetic organic polyelectrolytes can be used to condition sludges to enhance their dewaterability. When conditioning biological sludges, the charge on the polymer has a significant impact on the effectiveness of the polymer as a conditioner. The objectives of this investigation were to determine the most effective type and dosage of polymer for conditioning digested sludge prior to dewatering, and to investigate the relationship between dewaterability and particle size. 3 types of digested sludge were used under the different digestion processes like anaerobic digestion, aerobic digestion and intermittent aerobic digestion. CST(capillary suction time), TTF(time-to-filter) and SRF(specific resistance to filtration) were tested as a dewaterability index and the number of particle distribution was analyzed using particle size analyzer. The results indicate that cationic polymer appears to be required for effective conditioning of these 3 types digested sludge and the optimal polymer dosage is about 0.6% of SS. CST and TTF are well correlated with mean particle diameter of which the dimension order is 1.7.

• Journal of Korean Society on Water Environment
• /
• v.20 no.4
• /
• pp.346-351
• /
• 2004

Because of being produced a great deal of excess sludges from biological wastewater treatment process, the subject regarding treatment and disposal of them has been significantly handled in real plants. It should be considered the alternative treatment with easy operating and cost effective process in rural areas. For the thickening of wasted activated sludge from small scale wastewater treatment facilities, thus, the provisional sludge thickening system was developed by the application of mesh filter module. Three meshes with different pore size(100, 150, $200{\mu}m$) were prepared for filter modules that were used to withdraw effluent from thickening system. A filter module with $100{\mu}m$ mesh was chosen as the most effective thickening material in the viewpoint of volume reduction and effluent quality: the volume reductions of initially injected sludge with 3,600 mg/L and 9,100 mg/L were 95% and 85%, respectively, and the filtered effluents were enough good to be shown below 1.0 mg/L of SS and 1.0 NTU of turbidity. Since the filtration of thickening was influenced by the cake layer formed on mesh filter module and this system was operated in the combination of sludge thickening with gravity settling, the filter modules with smaller pore size and the larger floc size were required for long term operation safely.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.534-544
• /
• 1997

The permittivity distribution of a two-dimensional high-contrast object with large size, which leads to the global minimum of cost function, is reconstructed by iteratively using the hybrid algorithm of Levenberg-magquardt algorithm(LMA) plus Genetic Algorithm(GA). The scattered fields calculated in a cost function are expanded in angular spectral modes, of which only effective propagating modes are used. The definition of cost function based on the effective propagating modes enables us to formulate the minimum number of incident waves for the reconstruction of object. It is numerically shown that LMA has an advantage of fast convergence but can't reconstruct a high-contrast object with large size and GA can reconstruct a high-contrast object with large size but has an disadvantage of slow convergence, whereas an inverse scattering technique using the hybrid algorithm adopts only advantages of LMA and GA.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.143-150
• /
• 2011

Copper electroplating has been applied to various fields such as decorative plating and through-hole plating. Technical realization of high strength copper preplating for wear-resistant tools and molds in addition to these applications is the aim of this work. Brighters and levelers, such as MPSA, Gelatin, Thiourea, PEG and JGB, were added in copper sulfate electrolyte, and the effects of these organic additives on the hardness were evaluated. All additives in this work were effective in increasing the hardness of copper electrodeposits. Thiourea increased the hardness up to 350 VHN, and was the most effective accelarator in sulfate electrolyte. It was shown from the X-ray diffraction analysis that preferred orientation changed from (200) to (111) with increasing concentration of organic additives. Crystallite size decreased with increasing concentration of additive. Hardness was increased with decreasing crystallite size, and this result is consistent with Hall-Petch relationship, and it was apparent that the hardening of copper electrodeposits results from the grain refining effect.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1864-1866
• /
• 1999

The magnetic nondestructive test can be applied to evaluate the magnetic material characteristics and the fracture properties through the internal defects of SA-508 used in the pressure vessels of the nuclear power plants as the direct and accurate in-situ testing methods. The fracture toughness, yield strength and the stress distribution around the defects in the surface and sub-surface of magnetic materials can be directly estimated by Bark-hausen noise(BN) methods as NDT. The testing process of SA-508 by Barkhausen noise method was advanced by controlling the austenizing peak temperature and the time of maintenance at a constant austenizing peak temperature, therefore causing the variation of fracture toughness. Through above process. we can evaluate the variations of effective grain size and the correlation of effective grain size and FATT at each situation. And the stress distribution around the defects can be quantified nondestructively through Barkhausen method.