• 제목/요약/키워드: effective number

검색결과 7,611건 처리시간 0.03초

Effects of corner cuts and angles of attack on the Strouhal number of rectangular cylinders

  • Choi, Chang-Koon;Kwon, Dae-Kun
    • Wind and Structures
    • /
    • 제6권2호
    • /
    • pp.127-140
    • /
    • 2003
  • An investigation into the effect of corner cuts on the Strouhal number of rectangular cylinders with various dimensional ratios and various angles of attack is described. The Strouhal number given as a function of corner cut size is obtained directly from the aerodynamic behavior of the body in a uniform flow through a series of wind-induced vibration tests. For a quick verification of the validity of the Strouhal numbers obtained in this way, they are compared with the approximated the Strouhal numbers based on Shiraishi's early research. The test results show that the Strouhal number of the model with various corner cuts has a fluctuating trend as the angle of attack changes. For each cutting ratio as the angle of attack increases at each cutting ratio above $15^{\circ}$, the Strouhal number decreases gradually, and these trends are more evident for larger corner cut sizes. However, a certain corner cut size which is effective in reducing the wind-induced vibration can be identified by larger Strouhal numbers than those of other corner cut sizes. Three distinct characteristics of Strouhal number variation can be identified in three regions which are termed as Region I, II, and III based on the general trend of the test results. It is also found that the corner cut is effective in one region (Region-II) and less effective in another one (Region-III) when only the vortex-induced vibration occurs.

한류가 한국 음식에 대한 인식과 태도에 미치는 영향 -방한 일본인 관광객을 대상으로- (Impact of the 'Korean wave' on the Recognition and Attitudes to Korean Traditional Pood - Among Japanese Tourists Visiting Korea -)

  • 이연정
    • 동아시아식생활학회지
    • /
    • 제16권5호
    • /
    • pp.497-505
    • /
    • 2006
  • This questionnaire study was conducted to investigate the levels of recognition and attitude for Korean traditional food among Japanese tourists. The aim was to provide basic data for making a detailed marketing direction alignment of globalization and commercialization of Korean traditional food. The results can be summarized as follows. The 'Korean wave(Hanliu)' was 'the number of known Korean star performers'(3.77 points), 'the number of watched Korean dramas'(3.67 points), 'the number of watched Korean movies'(3.44 points), 'the number of owned Korean singer's tapes or CDs'(3.04 points), 'the number of read books'(2.83 points), and 'the number of viewed cartoons'(2.49 points), in order. The high-intake frequency of Korean traditional foods was 'Bibimbap', 'Galbigui', 'Baechookimchi', 'Bulgogi', 'Kkakdugi', 'Tteokbokki', 'Japchae', 'Galbitang', 'fajeon', and 'Namullyu' in order. On the other hand, the intake frequency of 'Songpyeon', 'Inielmi', 'Sikhye' and 'Sujeonggwa' was very low. The most effective 'Hanliu' item for raising the recognition of Korean traditional food was 'the number of read books'. The most effective 'Hanliu' item for raising the experience of Korean cooking was 'the number of read books', followed by 'the number of watched Korean movies', 'the number of watched Korean dramas', and 'the number of viewed cartoons' in order. The most effective 'Hanliu' item for raising the intake frequency of Korean traditional food was' the number of watched Korean dramas', followed by 'the number of watched Korean movies' and 'the number of read books' in order.

  • PDF

A Study of the Gas Liquid Partition Coefficients of Eleven Normal, Branched and Cyclic Alkanes in Sixty Nine Common Organic Liquids: The Effect of Solute Structure

  • Cheong, Won-Jo
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권3호
    • /
    • pp.459-468
    • /
    • 2002
  • Literature data measured by the author have been processed to report on the effect of solute structure on gas liquid partition coefficients of eleven normal, branched and cyclic alkanes ranging in carbon number from five to nine in sixty nine low molecular weight liquids. The alkane solutes are n-pentane(p), n-hexane(hx), n-heptane(hp), n-octane(o), n-nonane(n), 2-methylpentane(mp), 2,5-dimethylpentane(dp), 2,5-dimethylhexane(dh), 2,3,4-trimethylpentane(tp), cyclohexane(ch), and ethylcyclohexane(ec). The solvent set encompasses most of those studied by Rohrschneider as well as three homologous series of solvents (n-alkanes, 1-alcohols and 1-nitriles) and several perfluorinated alkanes and highly fluorinated alcohols. An excellent linear relationship was observed between lnK and the carbon number of n-alkanes. The effective carbon numbers of branched and cyclic alkanes were determined in a similar fashion to the method of Kovats index. We found that the logarithm of solute vapor pressure multiplied by solute molar volume was a perfect descriptor for the linear relationship with the median effective carbon number.

톱니형 핀이 부착된 튜브의 와유출특성 연구 (Characteristics of Vortex Shedding behind a Circular Cylinder with Serrated Fins)

  • 부정숙;류병남;김경천
    • 대한기계학회논문집B
    • /
    • 제25권8호
    • /
    • pp.1077-1086
    • /
    • 2001
  • An experimental study is performed to investigate the characteristics of vortex shedding behind a circular cylinder with serrated fins using hot-wire anemometer. Strouhal numbers which are calculated using outer diameter of a circular cylinder with serrated fins are higher than that of a circular cylinder. Fin thickness and pitch are closely related with vortex shedding frequency and play increasing or decreasing vortex shedding after transient Reynolds number. Strouhal numbers using effective diameters which are proposed in this paper agree with that of a circular cylinder. After transient Reynolds number, a trend of Strouhal number can be estimated by checking the ratio of effective diameter to inner diameter.

유효강우량 산정을 위한 곡선번호방법의 적용성 (Validity of Runoff Curve Number Method for Estimating of Effective Rainfall)

  • 윤태훈
    • 물과 미래
    • /
    • 제24권2호
    • /
    • pp.97-108
    • /
    • 1991
  • 유역의 수문학적 토양피복형으로부터 유역 또는 합성곡선번호를, 강우-유출기록으로부터 관측곡선 번호를, 관측곡선번호의 중앙치로서 중위유선번호를 산정하였다. 유출기록을 기준으로 평가할 경우 AMC-II조건의 CN-II에 의하면 과소하게, AMC-III조건의 CN-III에 의하면 과대하게 유효강우량이 산정된다. 따라서 유효강우량산정의 개선방안으로 CN-II와 CN-III의 중간값인 조정곡선번호가 정의될 수 있다. 중위곡선번호에 의하여 산정된 유출이 관측치에 가장 근접하게 되는 점을 감안하면 계측유역의 대표곡선번호로서 중위곡선번호가 사용될 수 있다.

  • PDF

회전하는 원통형밀폐용기내의 아랫면가열에 의한 이중확산대류에 관한 실험적 연구 (Double-Diffusive Convection Due to Heating from Below in a Rotating Cylindrical Cavity)

  • 강신형;이태홍;이진호
    • 대한기계학회논문집
    • /
    • 제19권7호
    • /
    • pp.1731-1740
    • /
    • 1995
  • Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

Hemicellulase 처리에 의한 목재 펄프의 고해 효과 변화 (Advanced Effects of Pulp Bleaching Treated Hemicellulase)

  • 김병현
    • 한국인쇄학회지
    • /
    • 제26권1호
    • /
    • pp.65-72
    • /
    • 2008
  • Kappa number and brightness were more increased with treatment of endo-xylanase than hydrogen-peroxide. In pulp bleaching process, endo-xylanse was most effective in the other enzyme treatment. Exo-xylanase was effective more than 4 unit treatment. Kappa number was tiny increased with enzyme ratio, but less than 4 unit treatment, increased with hydrogen peroxide treatment ratio. In more than 4 unit acetyl-estease treatment, Kappa number and brightness were not influenced with enzyme treatment ratio, but concentration of hydrogen-peroxide.

  • PDF

Estimation of Effective Population Size in a Clonal Seed Orchard of Chamaecyparis obtusa

  • Kang, K.S.;Son, S.G;Kim, C.S.
    • 한국산림과학회지
    • /
    • 제96권5호
    • /
    • pp.528-532
    • /
    • 2007
  • Clonal differences in fertility (expressed as the number of female and male strobili) were determined for five consecutive years (2002-2006) in a clonal seed orchard of Chamaecyparis obtusa. Fertility varied among clones and among years with producing five-year averages of 378.8 and 871.2 for female and male strobili per ramet, respectively. Correlation between female and male strobilus production was positive over the five years and statistically significant. Based on the observed fertility variation, the effective population sizes (estimated by status numbers, $N_e$) were calculated and varied from 24.3 to 47.9 (48.6% to 95.8% of census number, N) among the five studied years. On average (pooled), the relative effective population size was 82% of the N. Variation in female fertility was higher than that in male fertility, and this variation was reflected on female and male parents' status numbers. Pooled $N_e$ estimated from the five years was higher than that from poor seed production years. From our results, it was concluded that genetic diversity collected from good flowering years would be higher than that from poor flowering years.

냉간 가공 제품의 경도와 유효 변형률에 관한 연구 (A Study on Hardness and Effective Strain of Cold-Worken Products)

  • 최영;박준홍
    • 한국정밀공학회지
    • /
    • 제21권9호
    • /
    • pp.142-148
    • /
    • 2004
  • It is already known that hardness number of cold-forged product is in close conjunction with its effective strain. This paper presents the method to predict the relation between effective strains and hardness by using FE-simulation of hardness test from the conception that hardness indicates resistance to plastic deformation. The results of FE-simulation for the materials are compared with those of experiments and also compared with those of experiments in reference to show the feasibility of the proposed method. In addition, the present method was applied to the cold-forged product to verify the relation between hardness and effective strain. As a result, the predicted hardness number by the present method is in good agreement with experimental values. Prediction of hardness fur a cold-forged product comes to be possible by estimating the relation between effective strain and hardness using the proposed method in this study.

초미세 틈새의 기체 베어링 해석용 유효 점도의 표현식과 관련 계수들의 민감도 해석 (Sensitivity Analysis of Effective Viscosity Coefficients for Computing Characteristics of Ultrathin Gas Film Bearings)

  • 김의한;임윤철
    • Tribology and Lubricants
    • /
    • 제30권1호
    • /
    • pp.15-20
    • /
    • 2014
  • A more accurate expression for effective viscosity is obtained using a linear regression of the data from Fukui-Kaneko's model, which are obtained through numerical calculations based on the linearized Boltzmann equation. Veijola and Turowski's expression is adopted as a base function for effective viscosity. The four coefficients in that equation are optimized, and sensitivity analysis is conducted for these coefficients. The results show that the coefficient for the first-order Knudsen number is the most accurate, whereas the coefficient in the exponential of the Knudsen number is the least accurate compared with Fukui-Kaneko's results. The expression for effective viscosity is accurate within 0.02% rms of Fukui-Kaneko's results for the inverse Knudsen numbers from 0.01 to 100 and surface accommodation coefficients ranging from 0.7 to 1.