• 제목/요약/키워드: effective data transfer rate

검색결과 78건 처리시간 0.025초

Performance Analysis of Water-Water Heat Pump System of 100 kW Scale for Cooling Agricultural Facilities

  • Kang, Youn Ku;Ryou, Young Sun;Jang, Jae Kyung;Kim, Young Hwa;Kim, Jong Goo;Kang, Geum Chun
    • Journal of Biosystems Engineering
    • /
    • 제39권1호
    • /
    • pp.34-38
    • /
    • 2014
  • Purpose: In this study, the performance of cooling system with the water-water heat pump system of 100kW scale made for cooling agricultural facilities, especially for horticultural facilities, was analyzed. It was intended to suggest performance criteria and performance improvement for the effective cooling system. Methods: The measuring instruments consisted of two flow meters, a power meter and thermocouples. An ultrasonic and a magnetic flow meter measured the flow rate of the water, which was equivalent to heat transfer fluid. The power meter measured electric power in kW consumed by the heat pump system. T-type thermocouples measured the temperature of each part of the heat pump system. All of measuring instruments were connected to the recorder to store all the data. Results: When the water temperature supplied into the evaporator of the heat pump system was over $20^{\circ}C$, the cooling Coefficient Of Performance(COP) of the system was higher than 3.0. As the water temperature supplied into the evaporator, gradually, lowered, the cooling COP, also, decreased, linearly. Especially, when the water temperature supplied into the evaporator was lower than $15^{\circ}C$, the cooling COP was lower below 2.5. Conclusions: In order to maintain the cooling COP higher than 3.0, we suggest that the water temperature supplied into evaporator from the thermal storage tank should be maintained above $20^{\circ}C$. Also, stratification in the thermal storage tank should be formed well and the circulating pumps and the pipe lines should be arranged in order for the relative low-temperature water to be stored in the lower part of the thermal storage tank.

기존 공동 주택의 벽체 열성능 현장 측정법에 관한 연구 (The study of in-situ measurement method for wall thermal performance diagnosis of existing apartment)

  • 김서훈;김종훈;류승환;정학근;송규동
    • KIEAE Journal
    • /
    • 제16권4호
    • /
    • pp.71-77
    • /
    • 2016
  • Purpose : The energy saving in a residential building (apartment) sector is known as one of the effective solution of energy reduction. In South Korea, the government has recently reinforced regulations associated with the energy performance of buildings. However, there is a lack of research on the methods for the energy performance diagnosis that is used to analyze the wall thermal performance of the existing apartments. Because a reliable diagnosis is necessary to save the building energy, this study analyzed wall thermal performance of an existing apartment in Seoul. Method : This paper applied two methods for analysis of the thermal insulation performance; HFM(Heat Flow Meter) method and ASTR(Air-Surface Temperature Ratio) method. The HFM method is suggested by ISO9869-1 code to measure the thermal performance. The ASTR method is proposed by this study for the simplified In-situ measurement and it uses three temperature data (interior wall surface, interior and exterior air) and the overall heat transfer coefficient. This study conducted the experiment of an existing apartment in Seoul using these methods and analyzed the results. Furthermore, the energy simulation tool of the building was used to suggest retrofit of the building based on the results of measurements. Result : The error rate of HFM method and ASTR method was analyzed in about 17 to 20%. As the results of comparison between the initial design values of the wall and the measured values, the 26% degradation of insulation thermal performance was measured. Lastly, the energy simulation tool of the building shows 10.8% energy savings in accordance with the construction of suggested retrofit.

비선형 편집 시스템에서의 HDV 편집에 관한 연구 (A Study on Editing HDV in Non-Linear Editing System)

  • 박성대
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.147-151
    • /
    • 2008
  • 2004년 1080i로 촬영이 가능한 HDV(High Definition Video) 카메라인 HDR-FX1이 등장한 이후, HDV 포맷을 지원하는 다양한 기종의 카메라 및 레코더의 등장으로 HD해상도의 영상 촬영과 녹화가 가능하게 되었다. 현재는 단 한 대만의 컴퓨터로 구성되어있는 비선형 편집 시스템에서 HDV 영상을 캡쳐하고 편집하여 출력까지 가능한 일이 현실이 되어있다. HDV 포맷은 HD와 같은 해상도와 DV(Digital Video) 와 같은 데이터 전송률을 가지고 있는 것이 특징으로 6mm Mini DV Cassette Tape에서도 데이터의 저장이 가능하다. 이것은 HDV 포맷이 Long GOP (Group of pictures) 개념의 압축방식을 사용하기 때문이다. 본 논문에서는 HDV 포맷에 대한 특징과 편집에서 중요시 되어야 할 부분, 그리고 HDV의 압축 기반인 Long GOP 에 대한 개념을 정리하여 보다 효율적인 HDV 편집이 가능하도록 하였다.

  • PDF

강섬유 보강 콘크리트의 배합비와 역학적 특성 사이의 관계 추정 (Correlation between Mix Proportion and Mechanical Characteristics of Steel Fiber Reinforced Concrete)

  • 최현기;배백일;구해식
    • 콘크리트학회논문집
    • /
    • 제27권4호
    • /
    • pp.331-341
    • /
    • 2015
  • 본 연구는 섬유보강 콘크리트의 실무 적용을 위한 성능 평가에 대해 재료 시험으로 낭비되던 시간과 노력을 최소화하고 적용에 있어서의 이론적인 배경을 확보하기 위해, 기존의 가이드라인 및 시험 기준에 따른 실험 결과의 수집과 통계적 분석을 통한, 콘크리트의 압축강도에 기반한 주요 특성들을 특정하기 위해 수행되었다. 섬유보강콘크리트는 다양한 변수에 영향을 받게 되므로 이론적인 접근이 어려운 측면이 있어 본 연구에서는 현재 실무에서 다방면으로 사용되고 있는 100MPa 이하의 압축강도를 가지는 콘크리트를 중심으로 0.25%에서 2% 사이의 강섬유 혼입량에 대한 압축강도와 인장강도 시험을 수행하였다. 인장강도 시험은 표준기관에서 정하고 있는 시험방법인 쪼갬인장강도와 휨인장강도에 대해 수행하였다. 섬유보강콘크리트의 재료시험 결과 쪼갬인장강도와 휨인장강도 모두 압축강도의 증가에 따라 증가하는 추세를 보였으며 강도의 증진률은 압축강도 증가와 함께 감소하는 추세를 보였다. 또한섬유의 혼입량 증가는 인장강도의 증가를 유발하는 것을 확인할 수 있었으며, 압축강도 증가에 따른 인장강도 증진률 감소를 막아 콘크리트 압축강도 증가에 선형적으로 인장강도가 증가하도록 해주는 것을 확인할 수 있었다. 기존 연구들로부터 구축한 데이터베이스를 통한 섬유보강콘크리트의 기계적 성질에 대한 검토를 수행하였다. 다양한 변수에 따른 인장강도의 추정을 위해 인공신경망을 적용하였다. 인공신경망은 multi layer perceptron으로 구성하였으며 전달함수로는 sigmoid 함수를 사용하였고 역전파 알고리즘을 통해 학습을 수행하였다. 인공신경망을 사용한 콘크리트 인장강도의 추정 결과 시험 결과와 추정결과가 유사하게 나타나는 것을 확인할 수 있었다. 인공신경망에서 결합력이 큰 변수들은 물-시멘트비와 섬유의 혼입량으로 나타났으며 섬유보강콘크리트의 인장강도는 물-시멘트비에 영향을 받는 압축강도와 혼입량을 통해 추정할 수 있을 것으로 판단된다.

열응답시험 데이터를 이용한 SCW형 지중열교환기 블리딩 효과 분석 (An Analysis on the Bleeding Effect of SCW Ground Heat Exchanger using Thermal Response Test Data)

  • 장근선;김민준
    • 한국산학기술학회논문지
    • /
    • 제21권1호
    • /
    • pp.512-520
    • /
    • 2020
  • 개방형 지중열교환기(SCW)는 수직 밀페형 지중열교환기에 비해 높은 용량과 효율을 갖고 있어 최근에 우리나라에서 많이 보급되고 있는 추세이다. SCW형 지중열교환기의 여러 설계 및 운전변수 중 블리딩 운전이 지중 열전도율, 보어홀 열저항 등 열성능 개선에 가장 효과가 큰 것으로 보고되고 있다. 본 연구에서는 SCW형 지중열교환기가 설치된 현장의 열응답시험 결과를 기반으로 블리딩해석 모델을 정립하고 블리딩율 및 지하수 유입수의 위치변화가 SCW형 지중열교환기 열성능에 미치는 영향을 수치해석을 통하여 고찰하였다. 해석결과 지하수가 지중열교환기 상부에서 유입될 경우 지중열교환기 순환수의 시간에 따른 온도증가는 블리딩율이 증가함에 따라 낮아지는 경향을 보였으며, 지중 열전도율은 30% 블리딩율에서 179% 증가하는 결과를 보였다. 반면에 지하수가 지중열교환기 하부에서 유입될 경우 지중열교환기 순환수는 지중과 먼저 열교환을 한 후 유입수와 하단에서 혼합되기 때문에 지중열교환기 순환수의 온도증가는 상부 유입의 경우보다 적으며 블리딩율이 약 10%를 초과하면 일정하게 유지되는 경향을 보였다.

부산 지역 응급의료정보센터를 통한 산모와 신생아 전원에 대한 연구 (Analysis of Maternal and Neonatal Transport by the 1339 Emergency Medical Information Center in Busan Area)

  • 김미진;이명철;유재호;김묘징
    • Neonatal Medicine
    • /
    • 제18권1호
    • /
    • pp.137-142
    • /
    • 2011
  • 목적: 산모와 신생아 환자의 응급 진료는 치료의 특수성 때문에 치료할 수 있는 의료 기관 및 자원이 한정적이며, 상황에 따라 유동적으로 변화한다. 이에 저자들은 부산 지역 1339 응급의료 정보 센터를 통해 산모와 신생아 환자의 전원 상태를 조사하고, 주산기 의료 전달 체계의 현황을 파악하고자 하였다. 방법: 2009년 1월 1일부터 2009년 12월 31일까지 부산 지역 1339 응급 의료 정보 센터 전산 시스템에 입력된 자료를 이용하였다. 전원이 의뢰된 산모 378명과 신생아 136명을 대상으로 전원 성공률, 전원 결정까지 접촉한 의료 기관 수 및 소요 시간, 전원 이유, 전원 거절 이유를 후향적으로 조사하였다. 결과: 산모는 전원 성공률이 65.5%였고, 전원 결정까지 접촉한 의료 기관은 2.7개, 소요 시간은 평균 24.4분(11.3-29.8분)이었다. 전원을 의뢰한 이유는 미숙아 분만이 가장 많았고, 전원이 거절된 이유는 의료진 부족, 의료 장비 부족, 병상 부족 순이었다. 신생아는 전원 성공률이 71.3%였고. 전원 결정까지 접촉한 의료 기관은 2.4개, 소요 시간은 평균 15.6분(7.9-21.3분)이었다. 전원을 의뢰한 이유는 호흡기 증상이 가장 많았고, 전원이 거절된 이유는 병상 부족, 의료 장비 부족, 의료진 부족 순이었다. 결론: 응급 의료 정보 센터를 통해 많은 산모와 신생아가 전원되나 전원 성공률은 높지 않았다. 산모와 신생아 환자에 대한 주산기 진료 체계의 적정성 평가와 함께 앞으로 통합적이고 지역화된 주산기 의료 전달 체계의 구축을 위해서는 국가적 차원의 접근이 필요하겠다.

에너지 축열보드 열해석을 위한 컴퓨터 수치해석 (Computer Simulation for the Thermal Analysis of the Energy Storage Board)

  • 강용혁;엄태인;곽희열
    • 에너지공학
    • /
    • 제8권2호
    • /
    • pp.224-232
    • /
    • 1999
  • 캡슐형 잠열재를 이용한 열저장 시스템은 바닥 난방 및 건물 난방에서 매우 효과적인 시스템이다. 이러한 시스템 개발에 필수적인 요소가 열유동 매체가 순환하는 파이프 주변의 캡슐내 온도 분포와 열유동 매체의 유량 등이다. 그러므로 본 연구에서는 3차원 비정상 상태에서 Navier-Stokes 방정식, 난류모델을 비롯한 스칼라 보존 방정식을 적용하여 캡슐 블록의 온도 분포 및 파이프 내의 유동장 해석을 수행하였다. 또한 본 연구와 같이 계산 영역이 특별한 기하학적 현상을 형상(circle+square)인 문제 해결하는데 적용할 수 있는 새로운 격자 생성 기술(MBFGE/CCM)을 개발하였다. 격자계는 파이프에서 원형 격자를 이용하였고, 캡슐 블록에서 사각 격자를 이용하여 다중격자와 미세격자를 결합하여 사용하였다. 본 연구의 목적은 컴퓨터를 이용한 수치해석적 방법을 미세 캡슐을 이용한 축열보드에 적용하여 2종류의 열경계 상태에 대하여 속도와 온도분포를 계산하여 비교분석을 하는 것이다. 온도는 축열 보드의 한 쪽면은 대류면이고 다른 한쪽면은 단열면인 경우(Case 2)보다 양면 모두 단열인 경우(Case 1)일 때 더 높게 상승하였다. 온수 파이프 중심선인 Y=0 에 가까운 영역에서 Case 1과 Case 2사이에 축열 보드 내에서 온도 차이는 확연하게 나타났다. 향후 수치해석의 정확도를 높이고 축열 보드의 열전달 현상을 보다 정확히 계산하기 위해서는 위치 및 시간에 따른 정밀한 온도 측정값이 필요하고 특히 잠열재인 미세 캡슐이 상변화를 하므로 온도 변화에 따른 물질의 비열(C$_{p}$)과 열전달율(λ)을 고려한 방정식이 요구된다.

  • PDF

수직밀패형 지중열교환기의 설계인자가 보어홀 전열저항에 미치는 영향에 관한 연구 (A Study on the Effects of Design Parameters of Vertical Ground Heat Exchanger on the Borehole Thermal Resistance)

  • 장근선;김민준
    • 한국산학기술학회논문지
    • /
    • 제19권10호
    • /
    • pp.128-135
    • /
    • 2018
  • 현재 지열 열펌프 시스템에 수직밀폐형 지중열교환기가 가장 많이 적용되고 있으며, 수직밀폐형 지중열교환기의 성능에 영향을 미치는 주요 인자로는 지중 열전도율(k)과 보어홀 전열저항($R_b$)이 있다. 본 연구에서는 현장에서 측정된 열응답시험 데이터를 이용하여 보어홀 전열저항을 계산하였으며 지중열교환기 개별 설계인자들(순환수유량, 파이프 수, 그라우팅재)이 보어홀 전열저항에 미치는 영향을 분석하였다. 또한 도출된 그라우팅 열저항은 문헌에 제시된 다양한 상관식과 비교 분석하였다. 시험데이터를 통해 본 시험에서의 지중열교환기 보어홀 전열저항은 0.1303 W/m.K로 나타났으며, 보어홀 전열저항에서 그라우트 열저항이 66.6 %, 파이프 열저항이 31.5 %, 순환수 대류열저항이 1.9 %를 차지하여 그라우트가 보어홀 열전달에 가장 큰 영향을 미치는 인자임을 확인하였다. 또한 각 설계인자의 설계변수가 보어홀 전열저항에 미치는 영향을 분석한 결과 실리카샌드를 혼합하여 그라우트 열전도율를 높이는 방법이 파이프 수 증가나 순환수 유량증가보다 열전달 증진에 더 효과적임을 알 수 있었다.

Activation of Bovine Oocytes by Combined Treatment with Ionomycin and cdc2 Kinase Inhibitor

  • Yoo, J.G.;Cho, S.R.;Lee, S.L.;Ock, S.A.;Rho, G.J.;Son, D.S.;Lee, H.J.;Choe, S.Y.
    • 한국수정란이식학회지
    • /
    • 제16권3호
    • /
    • pp.223-231
    • /
    • 2001
  • The success of nuclear transplantation with mammalian oocytes depends critically on the potential of oocytes activation, which mainly caused to prevent the re-accumulation of maturation promoting factor (MPF). This study was conducted to compare the effect of combined treatment of lonomycin with a Hl-histone kinase inhibitor (dimethylaminopurine, DMAP) or cdc2 kinase inhibitor (sodium pyrophosphate, SPP) on activation of bovine oocytes. In vitro matured bovine oocytes with the first polar body (PB) and dense cytoplasm were assigned to 3 experimental groups. For activation treatment, oocytcs were exposed to 5 $\mu$M lonomycin for 5 min (Group 1), and followed by 1.9 mM dimethylaminopurine (DMAP) for 3 h (Group 2) or followed by 2 mM sodium pyrophosphate (SPP) for 3 h (Group 3). The activation effects in the three treatments and the control group (untreated) were judged by the extrusion of the second PB and formation of a pronucleus (PN). Differences among groups were analysed using one-way ANOVA after arc-sine transformation of proportional data. All three treatments led to high activation rates (90% to 95%), with significant difference from the control. However, the extrusion of the second PB and the rate of PN formation differed remarkably among treatments. In Group I and 3, about 95% of the oocytes had extruded the second polar body, but one PN had formed in a higher proportion of oocytes in Group 3 than in Group 1 (90% vs. 5%). In experiment 2, the rates of cleavage and development into blastocysts in Group 1 were significantly lower than those of Group 2 and 3 (8.7% and 0% vs. 50.5% and 11.6%, and 44.6% and 7.2%, respectively, P<0.05). In experiment 3, ~80% of parthenotes in Group 1 were developed with haploid chromosomal sets. However, when ionomycin was followed immediately by DMAP (Group 2). only 20% of parthenotes were haploid. In Group 3, combined treatment with ionomycin and SPP, the appearance of abnormal chromosomal tracts was significantly (P〈0.05) reduced and the proportion of haploid parthenotes was increased to 85% (17/20) than in Group 2. These results demonstrate that SPP acted as a cdc2 kinase inhibitor and formed the haploidy in oocyte activation. Thus, the present study suggests that cdc2 kinase inhibitor, such as sodium pyrophosphate, may have an effective role in oocyte activation for the production of cloned embryos/animals by nuclear transplantation.

  • PDF

소규모 기업에 있어서 지식소싱 전략이 기업성과에 미치는 영향 고찰 (An Examination of Knowledge Sourcing Strategies Effects on Corporate Performance in Small Enterprises)

  • 최병구
    • Asia pacific journal of information systems
    • /
    • 제18권4호
    • /
    • pp.57-81
    • /
    • 2008
  • Knowledge is an essential strategic weapon for sustaining competitive advantage and is the key determinant for organizational growth. When knowledge is shared and disseminated throughout the organization, it increases an organization's value by providing the ability to respond to new and unusual situations. The growing importance of knowledge as a critical resource has forced executives to pay attention to their organizational knowledge. Organizations are increasingly undertaking knowledge management initiatives and making significant investments. Knowledge sourcing is considered as the first important step in effective knowledge management. Most firms continue to make an effort to realize the benefits of knowledge management by using various knowledge sources effectively. Appropriate knowledge sourcing strategies enable organizations to create, acquire, and access knowledge in a timely manner by reducing search and transfer costs, which result in better firm performance. In response, the knowledge management literature has devoted substantial attention to the analysis of knowledge sourcing strategies. Many studies have categorized knowledge sourcing strategies into intemal- and external-oriented. Internal-oriented sourcing strategy attempts to increase firm performance by integrating knowledge within the boundary of the firm. On the contrary, external-oriented strategy attempts to bring knowledge in from outside sources via either acquisition or imitation, and then to transfer that knowledge across to the organization. However, the extant literature on knowledge sourcing strategies focuses primarily on large organizations. Although many studies have clearly highlighted major differences between large and small firms and the need to adopt different strategies for different firm sizes, scant attention has been given to analyzing how knowledge sourcing strategies affect firm performance in small firms and what are the differences between small and large firms in the patterns of knowledge sourcing strategies adoption. This study attempts to advance the current literature by examining the impact of knowledge sourcing strategies on small firm performance from a holistic perspective. By drawing on knowledge based theory from organization science and complementarity theory from the economics literature, this paper is motivated by the following questions: (1) what are the adoption patterns of different knowledge sourcing strategies in small firms (i,e., what sourcing strategies should be adopted and which sourcing strategies work well together in small firms)?; and (2) what are the performance implications of these adoption patterns? In order to answer the questions, this study developed three hypotheses. First hypothesis based on knowledge based theory is that internal-oriented knowledge sourcing is positively associated with small firm performance. Second hypothesis developed on the basis of knowledge based theory is that external-oriented knowledge sourcing is positively associated with small firm performance. The third one based on complementarity theory is that pursuing both internal- and external-oriented knowledge sourcing simultaneously is negatively or less positively associated with small firm performance. As a sampling frame, 700 firms were identified from the Annual Corporation Report in Korea. Survey questionnaires were mailed to owners or executives who were most erudite about the firm s knowledge sourcing strategies and performance. A total of 188 companies replied, yielding a response rate of 26.8%. Due to incomplete data, 12 responses were eliminated, leaving 176 responses for the final analysis. Since all independent variables were measured using continuous variables, supermodularity function was used to test the hypotheses based on the cross partial derivative of payoff function. The results indicated no significant impact of internal-oriented sourcing strategies while positive impact of external-oriented sourcing strategy on small firm performance. This intriguing result could be explained on the basis of various resource and capital constraints of small firms. Small firms typically have restricted financial and human resources. They do not have enough assets to always develop knowledge internally. Another possible explanation is competency traps or core rigidities. Building up a knowledge base based on internal knowledge creates core competences, but at the same time, excessive internal focused knowledge exploration leads to behaviors blind to other knowledge. Interestingly, this study found that Internal- and external-oriented knowledge sourcing strategies had a substitutive relationship, which was inconsistent with previous studies that suggested complementary relationship between them. This result might be explained using organizational identification theory. Internal organizational members may perceive external knowledge as a threat, and tend to ignore knowledge from external sources because they prefer to maintain their own knowledge, legitimacy, and homogeneous attitudes. Therefore, integrating knowledge from internal and external sources might not be effective, resulting in failure of improvements of firm performance. Another possible explanation is small firms resource and capital constraints and lack of management expertise and absorptive capacity. Although the integration of different knowledge sources is critical, high levels of knowledge sourcing in many areas are quite expensive and so are often unrealistic for small enterprises. This study provides several implications for research as well as practice. First this study extends the existing knowledge by examining the substitutability (and complementarity) of knowledge sourcing strategies. Most prior studies have tended to investigate the independent effects of these strategies on performance without considering their combined impacts. Furthermore, this study tests complementarity based on the productivity approach that has been considered as a definitive test method for complementarity. Second, this study sheds new light on knowledge management research by identifying the relationship between knowledge sourcing strategies and small firm performance. Most current literature has insisted complementary relationship between knowledge sourcing strategies on the basis of data from large firms. Contrary to the conventional wisdom, this study identifies substitutive relationship between knowledge sourcing strategies using data from small firms. Third, implications for practice highlight that managers of small firms should focus on knowledge sourcing from external-oriented strategies. Moreover, adoption of both sourcing strategies simultaneousiy impedes small firm performance.