• 제목/요약/키워드: effective data transfer rate

검색결과 77건 처리시간 0.025초

산業용 GAS 보일러의 動特性에 관한 硏究 (I) (A Study on the Dynamic Charateristics for Control of Gas-Fueled industrial Gas Boiler(I))

  • 임종한;이종원
    • 대한기계학회논문집
    • /
    • 제16권5호
    • /
    • pp.965-973
    • /
    • 1992
  • 본 연구에서는 산업용 가스전소자연순환보일러를 모델로 선정하여 이 모델에 영향을 주는 인자에 대하여 동적 해석을 하였다. 수위와 압력을 연결한 자연순환 보일러의 제어를 위한 총괄적인 블록 선도를 제시하였고, 이 선도를 토대로 전산프로 그램을 개발하고 계산치와 실제 측정치를 비교, 검토하여 이론 해석상의 모순이 없음 을 확증하였다. 연구결과를 산업용 자연순환 gas 보일러의 설계에 응용하도록 하여 보일러의 동특성을 제시하고 이것에 의한 전제어시스템의 신속하고 정확한 설계치를 제시하여 응용사용토록 하여 무엇보다도 전보일러시스템의 안전운전과 경제성(제작비 및 가동비)을 제고하는데 있다. 본 논문을 제1부, 제2부로 나누어 발표해야 하므로 제1부는 결론을 포함시키지 못하며 제2부에서 결론을 제시하겠으니 참조하여 주시기 바랍니다.

다중 존 디스크 환경에서 다차원 인덱스 구조의 효율적 저장 기법 (Efficient Storage Techniques for Multidimensional Index Structures in Multi-Zoned Disk Environments)

  • 유병구;김선호;장재영
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제34권4호
    • /
    • pp.315-327
    • /
    • 2007
  • 대용량의 다차원 데이타를 다루는 데이타베이스 응용분야에서는 접근 방법 및 기반 디스크 시스템이 전반적인 성능에 중요한 영향을 미친다. 현재 생산되고 있는 많은 디스크들은 다중의 물리적 존을 갖도록 설계되고 있다. 그러나 기존의 접근 방법에 대한 연구는 단순한 가정의 전통적인 디스크 모델에 기반을 두고 진행되어 왔고, 다중 존 디스크를 고려한 접근 방법에 대한 연구는 현재까지 거의 이루어지지 않고 있다. 본 논문에서는 다중 존 디스크 환경에서 실질적인 데이타 전송률을 향상시키기 위해, 정적 및 동적 환경 모두를 고려한 다차원 인덱스 구조의 디스크 저장 기법을 제안한다. 이를 위해 다차원 인덱스 구조를 다중 존 디스크에 효과적으로 배치하는 알고리즘을 제시하고, 범위 질의에 대해 지역화된 질의 처리 기법을 제안한다. 또한 실험을 통하여 본 논문이 제안한 기술이 질의 성능을 획기적으로 향상시킨다는 것을 증명한다.

교량감시를 위한 무선 센서 네트워크 구조 및 보안 프로토콜 (A Wireless Sensor Network Architecture and Security Protocol for Monitoring the State of Bridge)

  • 임화정;전진순;이헌길
    • 한국컴퓨터산업학회논문지
    • /
    • 제6권3호
    • /
    • pp.465-476
    • /
    • 2005
  • 무선 센서 네트워크는 물리적인 제약을 가진 수많은 센서 노드들로 구성되어 있다. 각 센서 노드는 주변의 상태를 감지하고, 감지된 정보를 싱크(Sink)로 보내는 역할을 한다. <중략> 본 논문에서는 교량과 같은 인공구조물에 적합한 비 계층적 무선 센서 네트워크 구조를 제시하였다. 또한, 센서 노드들의 휴면(Sleep)과 활동(Awake) 상태를 이용한 효율적인 보안 라우팅 프로토콜과 센서 노드의 키와 위치 정보를 사전에 노드에 분배하는 사전 키 분배 방식 및 2계층 인증 기법을 제안하였다. 제안하는 방식은 대체 경로 수의 증가로 인한 데이터 전송률의 증가와 에너지 소모율의 감소 효과를 보였다.

  • PDF

Effects of High-Frequency Treatment using Radiofrequency on Autonomic Nervous System and Pain in Women with Dysmenorrhea

  • Sungeon Park;Seungwon Lee;Inok Kim
    • Physical Therapy Rehabilitation Science
    • /
    • 제11권4호
    • /
    • pp.493-501
    • /
    • 2022
  • Objective: The purpose of this study is to present basic data for appropriate therapeutic intervention by confirming changes in the autonomic nervous system and pain by applying high-frequency deep diathermy to the lower abdomen in patients with primary dysmenorrhea. Design: A randomized controlled clinical trial. Methods: Thirty-eight women aged 18-50 years who complained of regular menstrual cycles (24-32 days) and primary dysmenorrhea symptoms were randomly assigned to a high-frequency therapy group (5, 7, or 9 mins) and a superficial heat therapy group (20 min). High frequency treatment group: The subject was in a supine position, and radio frequency was applied to the lower abdomen below the umbilicus. The radio frequency therapy device used in this study uses a 300 kHz capacitive electrode and a 500 kHz resistive electric transfer to deliver deep heat. Superficial heat treatment Group: Subjects applied a hot pack to the lower abdomen for 20 minutes while lying on their back. Evaluations were made of Heart rate variability and Visual Analogue Scale. Results: In subjects with menstrual pain, there was a significant difference in pain between the high-frequency therapy group and the superficial heat therapy group (p=0.026). However, there was no significant difference between the autonomic nervous system and the stress resistance (p>0.05). Conclusions: As a result of this study, high-frequencytreatment using radiofrequency was effective in relieving pain because it can penetrate deeper tissues than conventional hot packs using superficial heat. In particular, it was found that the optimum effect was obtained when high frequency was applied forfive-seven minutes.

5 GHz/60 GHz 다중대역을 사용하는 WLAN을 위한 대역이동 결정 기법 (Frequency Band Selection for WLAN Using Multiple Bands of 5 GHz/60 GHz)

  • 정태훈;정동근
    • 한국통신학회논문지
    • /
    • 제39A권12호
    • /
    • pp.718-728
    • /
    • 2014
  • 60 GHz 대역과 낮은 (2.4 GHz/5 GHz) 주파수 대역을 모두 사용하는 다중대역 WLAN은 송수신 단말이 충분히 가까우면 60 GHz 대역을 사용하여 Gbps 속도로 통신을 하고 단말 간의 거리가 멀면 낮은 주파수 대역에서 동작하여, 어떠한 경우에도 최적의 전송속도를 제공할 수 있다. 다중대역 WLAN의 효율적 운용을 위해서는 WLAN의 동작대역을 적절히 변경하는 대역이동 방안이 필요하다. 본 논문에서는 효과적인 대역이동 결정 기법을 설계한다. 또한 대역이동 프로토콜을 실제 구현할 때 필요한 제어프레임의 전송속도 선택 방법도 함께 제안한다. NS-3를 사용한 컴퓨터 시뮬레이션을 이용하여 인적 차폐(human blockage) 또는 로그노말 전파음영(log-normal shadowing)이 발생하는 환경에서 제안된 기법의 성능을 평가한다.

수중 음향 통신에서 다중 밴드 전송 기법의 성능 분석 (Performance Analysis of Multiband Transmission Technique in Underwater Acoustic Communication)

  • 이희수;백창욱;도대원;정지원
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권3호
    • /
    • pp.253-258
    • /
    • 2018
  • 다중 밴드 통신 기법은 채널 전달 특성 등 환경이 매우 빠르게 변하는 수중 음향통신 환경에서 동일 데이터를 서로 다른 주파수 밴드에 할당하여 선택적 페이딩을 극복할 수 있어 성능이나 전송 효율 측면에서 효과적이며, 다양한 수중 채널 환경을 극복하면서 전송 거리를 더욱 확장할 수 있다. 본 논문에서는 수중 음향 통신에서 다중 밴드 전송 기법의 효율성 분석을 위해 부호화율 1/3을 갖는 Turbo pi부호를 이용하여 다중 밴드의 개수를 1~5개까지 적용하였으며 시뮬레이션을 통해 성능을 분석하였다. 시뮬레이션 결과 수신 SNR을 기준으로 밴드 수의 증가 시 성능이 우수함을 알 수 있다.

UWB 통신모듈을 결합한 무선 내시경 기술 개발에 관한 연구 (A study on wireless endoscope technology development combined with UWB communication module)

  • 심동하;이종성;노정규;이민우;차재상
    • 한국위성정보통신학회논문지
    • /
    • 제9권1호
    • /
    • pp.17-21
    • /
    • 2014
  • 본 논문에서는 내시경 장비를 위한 UWB 통신모듈을 결합한 무선 내시경 기술 개발에 관한 연구를 진행하였다. 먼저, 국내외 UWB 통신기술 분야 및 국내 내시경 분야의 동향을 통하여 본 논문에서 제안하고자하는 UWB 무선 내시경 기술 개발에 관한 연구의 필요성에 대하여 제시하였으며, 그 필요성을 토대로 UWB 통신모듈을 결합한 무선 내시경을 개발하였다. 본 논문에서 제안하는 UWB 무선 내시경 기술은 기존의 내시경 영상취득 방식과는 다르게 유 무선 UWB 통신방식을 사용하여 내시경 영상을 취득할 수 있으며, 인체의 영상을 높은 전송률로 전송하며, 팬텀을 이용한 임상데이터에 기반한 DB화 및 스마트폰을 연동하는 기술 등 기존에는 없던 새로운 개념으로, 효과적이고 신뢰성있는 진단이 가능하다. 본 논문에서 제안한 UWB 통신모듈을 결합한 무선 내시경 기술은 UWB 통신기술의 응응사례로서 널리 활용될 수 있을 것으로 기대된다.

2상 내부 혼합형 노즐분사에서 ALR 변화에 따른 액적의 거동 (On the Behavior of Liquid Droplets Depending upon ALR in Two-phase Internal Mixing Nozzle Jet)

  • 김규철;남궁정환;이상진;노병준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.385-388
    • /
    • 2002
  • The researches of a two-phase atomizers have been carried out in the field of automotive and aerospace industries in order to improve the atomization performance of the liquid droplets ejecting from these nozzles. The smaller droplets have the advantages of the reduction of environmental pollution matter and effective use of energy through the improvement of heat and mass transfer efficiency. Thus, to propose the basic information of two-phase flow, an internal mixing atomizer was designed, its shape factor was 0.6 and the liquid feeding hole was positioned at the center of the mixing tube which was used to mix the air and liquid. The experimental work was performed in the field after the nozzle exit orifice. The measurement of the liquid droplets was made by PDPA system. This system can measure the velocity and size of the droplets simultaneously. The number of the droplets used in this calculation was set to 10,000. The flow patterns were regulated by ALR (Air to Liquid mass Ratio). ALR was varied from 0.1024 to 0.3238 depending on the mass flow rate of the air. The analysis of sampling data was mainly focused on the spray characteristics such as flow characteristics distributions, half-width of spray, RMS, and turbulent kinetic energy with ALR.

  • PDF

개인정보 보호를 위한 의료영상 복사발급 지침에 대한 고찰 (Study for Guideline of CD copy Issue to Secure Personal Information)

  • 이종웅;강지연;김은정
    • 대한디지털의료영상학회논문지
    • /
    • 제10권2호
    • /
    • pp.11-16
    • /
    • 2008
  • Images of medical treatment on PACS environment are digitized and they make saving and transmission of patient's information easy with CD format causing increase of patients transfer rate between hospital and data transmission as well. Figuring out the configuration of confining status of copied images of medical treatment with CD format and present the appropriate way of identification for personal information. 20 general hospital over 500 beds which are utilizing PACS currently. Questionnaire investigation focusing on PACS operation center and it's management people. In accordance with the law of securing personal information of public organizations, it says "Anyone who wants to see his or her information via representative he or she needs to make a letter of attorney and turn in this to the president of it's possessing facility" in the article 16. Based on the investigation of general hospital for CD copy issue status near metropolitan area, 8 out of 20, were issuing CD copy through personal identification process(the person oneself and representative) and 10 general hospital were doing by getting signature of receiptor only without identification of the person oneself and 2 general hospital confirmation process is not at all. By the law of securing personal information of public organization, article 16, confirmation process is supposed to mandate lawfully with a letter of attorney when there is any request of reading and/or copies of one's information. But in reality, there were no consistent rules on reading, the process and coverage of copy issue, rejection coverage of copy issue of CD copy in each general hospital PACS operation center. Therefore there is a big need for consolidated format which is applicable by law when the representative requests to issue of CD copy that is storing medical treatment images. By issue through this consolidated format, securing medical information of individual and systemic operation and management will be valid and effective.

  • PDF

Performance Analysis of Water-Water Heat Pump System of 100 kW Scale for Cooling Agricultural Facilities

  • Kang, Youn Ku;Ryou, Young Sun;Jang, Jae Kyung;Kim, Young Hwa;Kim, Jong Goo;Kang, Geum Chun
    • Journal of Biosystems Engineering
    • /
    • 제39권1호
    • /
    • pp.34-38
    • /
    • 2014
  • Purpose: In this study, the performance of cooling system with the water-water heat pump system of 100kW scale made for cooling agricultural facilities, especially for horticultural facilities, was analyzed. It was intended to suggest performance criteria and performance improvement for the effective cooling system. Methods: The measuring instruments consisted of two flow meters, a power meter and thermocouples. An ultrasonic and a magnetic flow meter measured the flow rate of the water, which was equivalent to heat transfer fluid. The power meter measured electric power in kW consumed by the heat pump system. T-type thermocouples measured the temperature of each part of the heat pump system. All of measuring instruments were connected to the recorder to store all the data. Results: When the water temperature supplied into the evaporator of the heat pump system was over $20^{\circ}C$, the cooling Coefficient Of Performance(COP) of the system was higher than 3.0. As the water temperature supplied into the evaporator, gradually, lowered, the cooling COP, also, decreased, linearly. Especially, when the water temperature supplied into the evaporator was lower than $15^{\circ}C$, the cooling COP was lower below 2.5. Conclusions: In order to maintain the cooling COP higher than 3.0, we suggest that the water temperature supplied into evaporator from the thermal storage tank should be maintained above $20^{\circ}C$. Also, stratification in the thermal storage tank should be formed well and the circulating pumps and the pipe lines should be arranged in order for the relative low-temperature water to be stored in the lower part of the thermal storage tank.