• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.216-225
• /
• 1995

Simulation for a dynamic analysis of the electrolytic preparation of U(IV) in two-phases system, which consisted of mass transfer of U(VI) from TBP phase into HNO$_3$ solution and electrolytic re-duction of U(VI) to U(IV) at a cathode in aqueous phase, was carried out in order to establish the most suitable operating condition and best electrode area as basic design data for the system. It was found that maintaining an appropriate mass transfer rate was more significant rather than enlarging the surface area of the cathode for more effective production yield of U(IV). The electrode area and the operation time affected deeply the production composition of U(IV) in the resulting aqueous phase. And optimal electrode areas ore evaluated to meet production criteria of U(IV) of resulting solution in several system conditions. Though about 0.37M HNO$_3$ was preferable to prepare the solution of U(IV), nitric acid concentration should be higher than 0.5M to prevent a hydrolysis of U(IV) in the aqueous phase.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM(Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring realtime moving picture data among digital information devices, we analyze USB transfer types and Descriptors and introduce the method to upgrade detailed performance of Isochronous transfer that is one of USB transfer types. In the case that Configuration descriptor of a device has Interface descriptor that has two AlternateSetting, if Isochronous transfers are not processed smoothly due to excessive bus traffic, the application of the device changes AlternateSetting of the Interface descriptor and requires a new configuration by SetInterface() request. As a result of this adaptive configuration, the least data frame rate is guaranteed to a device that the sufficient bandwidth is not alloted. And if the bus traffic is normal, the algorithm to return to the original AlteranteSetting is introduced. this introduced method resolve the bottleneck of moving picture transfer that can occur in home network connected by multiple digital devices.

• Clinical and Experimental Reproductive Medicine
• /
• v.20 no.1
• /
• pp.37-43
• /
• 1993

In 27 patients with the past history of poor response to the gonadotropin superovulation induction due to poor follicular growth or permature surge of endogenous luteinizing hormone, the effectiveness of pituitary supperssion with the gonadotropin releasing hormone agonist(GnRH-a) in in vitro fertilization(IVF) program was evaluated in 43 cycles using a combination regimen of D-Trp-6 LHRH(Decapeptyl, Ferring)and FSH/hMG from June, 1989 to August, 1990 at Korea University Hospital IVF Clinic. At midluteal phase of menstrual cycle, Decapeptyl-CR was administered by long-term protocol to minimize initial agonistic effect of endogenous gonadotropins. After the confirmation of pituitary suppression, about 2-3 weeks after GNRH-a administration, ovarian follicle growth was stimulated with FSH/hMG and followed by transvaginal ultrasonic measurement of follicle size and by monitoring of serm E2 and LH if necessary. When compared with the control group stimulated with gonadotropin regimen only, the cancellation rate and occurrence rate of premature LH surge during gonadotropin treatment were significantly lower in study group(11.6% and 2.4%, respectively). There is no significant differences in the mean number of aspirated oocytes, fertilization/cleavage rate, embryo transfer(ET) rate, and mean number of embryos transferred between the two groups. The pregnancy rate per treatment cycle, 16.3%, and per ET cycle, 23.3%, were significantly higher in the study group compared with those of control group. These data suggest that GnRH-a therapy is effective for previous poor responder In gonadotropin superovulation induction for IVF.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.681-686
• /
• 2002

In the industrial field, the theory of drying process is different from the practical application, and it is effective to reduce energy by recirculation of the heat of exhausting gas. But the study of this field may not be performed still. The cure properties of the urea resin moulding compounds was investigated according to drying temperature, drying time, recycle rate of exhausting gas and moulding temperature in the process of drying and moulding. We obtained the following results; water content of material decreases with increasing drying time and drying temperature, and the rate of drying also decreases with increasing recycle rate of exhausting gas. Specially, The cure fluidity of the urea resin moulding compounds decreases, with increasing drying temperature, recycle rate of exhausting gas and moulding temperature. And the correlation equations on water content and cure fluidity of the urea resin moulding material were obtained through a regression analysis of experimental data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1959-1975
• /
• 2011

Adaptive Bit Loading (ABL) in Multiple-Input Multiple-Output Orthogonal Frequency-Division Multiplexing (MIMO-OFDM) is often used to achieve the desired Bit Error Rate (BER) performance in wireless systems. In this paper, we discuss some of the bit loading algorithms, compare them in terms of the BER performance, and present an effective and concise Adaptive Grouped Loading (AGL) algorithm. Furthermore, we propose a "weight factor" for loading algorithm to converge rapidly to the final solution for various data rate with variable Signal to Noise Ratio (SNR) gaps. In particular, we consider the bit loading in near optimal Singular Value Decomposition (SVD) based MIMO-OFDM system. While using SVD based system, the system requires perfect Channel State Information (CSI) of channel transfer function at the transmitter. This scenario of SVD based system is taken as an ideal case for the comparison of loading algorithms and to show the actual enhancement achievable by our AGL algorithm. Irrespective of the CSI requirement imposed by the mode of the system itself, ABL demands high level of feedback. Grouped Loading (GL) would reduce the feedback requirement depending upon the group size. However, this also leads to considerable degradation in BER performance. In our AGL algorithm, groups are formed with a number of consecutive sub-channels belonging to the same transmit antenna, with individual gains satisfying predefined criteria. Simulation results show that the proposed "weight factor" leads a loading algorithm to rapid convergence for various data rates with variable SNR gap values and AGL requires much lesser CSI compared to GL for the same BER performance.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.351-354
• /
• 2002

This research discussed about the substrate transport phenomena in anaerobic biofilm. Three anaerobic fixed biofilm reactors were filled with the sludge of anaerobic digestor from Suyoung wastewater treatment plant. After 15 days of biofilm formation periods, suspended solids within the reactors were removed, and each fixed biofilm reactor was supplied with synthetic wastewater of different concentration of 8.00 mgTOC/L, 9.76 mgTOC/L and 18.97 mgTOC/L, respectively. The experimental results in conjunction with substrate transfer phenomena indicated that data - thickness, substrate removal rate. At the low influent substrate concentration(reactor 1 : 8.00 mgTOC/L, reactor 2 : 9.76 mgTOC/L), the rate of substrate utilization($k_v$), effective diffusivity($D_{eff}$) of substrate in biofilm were similar. While $k_v$ and $D_{eff}$ of the high influent substrate concentration(reactor 3 : 18.97 mgTOC/L) were higher than data in the reactors of the low influent substrate concentration.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.3
• /
• pp.115-132
• /
• 1996

The present problems concerning the control of generation, storage, collection, transfer and transport, processing and disposal of the municipal waste are serious. And the transportation of the municipal waste is recently a important part of solid waste treatment and disposal. The waste pneumatic transportation system is expected to be an effective method for use in solving that problems. In this study, pneumatic transportation system was applied to 2,000-5,000 households of public/group housing for economic and technical analysis on the basis of data for working and operation. The proper equipment must be selected through economic and technical analysis for generation and properties of waste because the equipment in facilities of system is various. And the efficient operation method should be studied on the basis of information on the record of oeration. As the wet food waste clogs the pipeline, it is necessary to examine under the actual condition. The maximum unit waste generation rate based on the assumption that each household is comprised of 3.20 people is determined $2,340g/household{\cdot}day$, and it is included the 50% increase of seasonal and daily change.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.177-184
• /
• 2002

In these day, the storage capacity has been growing and the informations increase in geometrically progression in a modem information age. At present the situation is required that the exchanges and access of the informations is available without regard to time and space. In this paper we present a effective backup systems to backup the information of server that continuously has to be accessible in 365's days. There are two backup cases. one is a file-base backup and the other is a block-based backup. In general, a block-based backup has a good performance than a file-based backup but it is difficult to implement a block-based systems. First, we introduce the technique of backup and methods, on-line backup. Next, we present our backup systems based on client-server model and have a snapshot facility. Finally we introduce SCSI-Protocol in order to increase the data transfer rate.

• Korean Journal of Occupational Health Nursing
• /
• v.18 no.1
• /
• pp.55-70
• /
• 2009

Purpose: This study was done to investigate the effect of non-smoking campaign for subway workers on their health behavior such as smoking, drinking, and exercise. Method: The study was done on the subjects of 112 male employees for 3 years from 2003 to 2005 working at the Seoul Metropolitan Rapid Transit Corporation. However, the subjects decreased to 105 in 2004 and 111 in 2005 due to work transfer. The data were obtained through administering questionnaires. The non-smoking campaign was done with health education using various strategies and methods by an administrator-in-charge assisted by the community health center. Results: Smoking rate and cigarette consumption decreased but there was no statistical significance. Smokers' frequency of drinking and exercise were higher than that of non-smokers, but there was no statistical significance. Conclusion: The result indicated the program was not effective to change the subjects' health behavior; therefore, tailored program considering the subjects is recommended.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1002-1012
• /
• 2024

To remove insoluble fission products, which could possibly cause reactor instability and significantly reduce heat transfer efficiency from primary system of molten salt reactor, a helium bubbling method is employed into a passive molten salt fast reactor. In this regard, two-phase flow behavior of molten salt and helium bubbles was investigated experimentally because the helium bubbles highly affect the circulation performance of working fluid owing to an additional drag force. As the helium flow rate is controlled, the change of key thermal-hydraulic parameters was analyzed through a two-phase experiment. Simultaneously, to assess the applicability of numerical model for the analysis of two-phase flow behavior, the numerical calculation was performed using the OpenFOAM 9.0 code. The accuracy of the numerical analysis code was evaluated by comparing it with the experimental data. Generally, numerical results showed a good agreement with the experiment. However, at the high helium injection rates, the prediction capability for void fraction of helium bubbles was relatively low. This study suggests that the multiphaseEulerFoam solver in OpenFOAM code is effective for predicting the helium bubbling but there exists a room for further improvement by incorporating the appropriate drag flux model and the population balance equation.