• Elastomers and Composites
• /
• 제45권2호
• /
• pp.122-128
• /
• 2010

소수성실리카를 안정제로 하는 현탁중합반응법을 이용하여 합성한 스티렌(St)/부틸메타크릴레이트(BMA) 공중합체 (co-PSB) 입자의 전단점도를 모세관 레오미터 (capillary rheometer)를 이용하여 $170^{\circ}C$에서 측정하였다. co-PSB 입자의 전단점도는 중량평균분자량이 74,800 g/mol 이하인 경우 낮은 전단속도에서는 뉴톤거동을 보였다. 중량평균분자량이 136,800 g/mol을 초과하면서 전단점도는 전단속도의 전 영역에 걸쳐 감소하였고 전단속도에 대한 기울기의 절대값은 분자량의 증가와 함께 증가하였다. St/BMA의 구성비가 7/3, 5/5 및 3/7의 co-PSB 입자는 유사한 분자량을 나타내었지만 BMA의 구성비가 증가하면서 유리전이온도와 전단점도는 감소하였다. St/BMA의 구성비가 1/9 인 co-PSB의 경우 유리전이온도는 더욱 감소하였으나 초기 전단점도는 크게 증가하였다. 카본블랙을 함유하는 co-PSB 복합체 입자의 전단점도는 카본블랙의 증가에 따라 증가하였으나, 카본블랙의 농도에 따른 전단점도의 변화는 분자량 및/혹은 구성비의 변화 효과에 비교하여 미약하였다.

• Journal of Plant Biology
• /
• 제33권1호
• /
• pp.59-64
• /
• 1990

In order to study the effect of GA3 on the phosphorylation of ribosomal proteins during germination in Zea mays, ribosomal proteins were labelled with 32P, extracted, electrophoresed and autoradiographed. There are five phosphorylated ribosomal proteins. One of these is in 40S subunit and has molecular weight of 33,000 daltons. Others are in 60S subunit and have molecular weights of 37,000, 16,000, 15,200 and 13,500, respectively. Phosphorylation of ribosomal proteins was increased maximum 47.7% in shoots of Zea mays treated with GA3.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

• 한국의류학회지
• /
• 제28권6호
• /
• pp.807-818
• /
• 2004

The antibacterial activities of several types of chitosan were measured against Staphylococcus aureus and evaluated for their application to antibacterial textile finishing. The ％ reduction of bacteria of the chitosans prepared in our laboratory were between 72 and 87%. The two water-soluble chitosans with molecular weights 1,000 and 3,000 did not show antibacterial activities. The deacetylation of chitosan was appeared to increase antibacterial activity. The ％ reduction in bacterial density of the 86％-deacetylated chitosan solution was 56% where that of the 76％-deacetylated chitosan solution was only 17％ at 0.1% chitosan concentration. Molecular weights of the chitosans seemed not to affect antibacterial activities of chitosans. The antibacterial activity of the acid-soluble, 86%-deacetylated chitosan with 4 cps showed 98% of the ％ reduction at the level of 0.2％ chitosan. The ％ reduction of bacteria of this chitosan was higher at the higher concentration of acetic acid in the chitosan-bacterial mixture. The antibacterial activity was increased with the pH change over the range of 4.0 to 6.5. The 100% of the ％ reduction of bacteria was achieved within 4 hour incubation of the chitosan-bacterial mixture. According to the data obtained from the above experiments, the four chitosans among the six prepared in our laboratory were proved to be valuable for antibacterial textile finishing.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.1-7
• /
• 1999

Urethane-acrylate propelymers for secondary coating of optical fiber and high - performance material were prepared from the 4,4'-diphenylmethane diisocyanate(MDI), poly(tetramethylene oxide)glycol(PTMG, Mw 650 or 1000), 1,6-hexanediol(HD), 2-hydroxyethyl acrylate(HEA), and dibutyltin dilaurate as a catalyst. UV-Curable polyurethane acrylates were formulated from the urethane-acrylate prepolymers, three types of reactive diluents(DTs) having mono-, di-, and trifunctional-phenoxyethyl acrylate(PEA), hexanediol diacrylate(HDDA), and trimethylolpropane triacrylate(TMPTA), and 1-hydtoxycyclohexyl phenyl ketone(Irgacure 184) as a photoinitiator. The UV-cured films of polyurethane acrylates were obtained by curing using a medium-pressure mercury lamp(U W/cm, $\lambda_{max}=365\;nm)$. In this work, the effects of molecular weights of polyol and diol with low molecular weight into polymer chain on mechanical and dynamic mechanical properties of UV-cured polyurethane acrylates were studied. The structure and properties of the films obtained from the UV photopolymerization of urethane-acrylate prepolymer were investigated by FT-IR spectroscopy, dynamic mechanical measurement, tensile testing, and X-ray diffractometry.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.48-52
• /
• 2004

Diffusion/penetration rates of finishing agents are not a major criterion in the design of low molecular weight finishing agents. However, in the case of polymeric finishing agents, high molecular weights result in large hydrodynamic volumes and diffusion/penetration of the finishing agent into the substrate may become a critical factor in the design of textile finishing agents. Thus the effect of the molecular weight of a model compound, polyethylene glycol, on its diffusion through a cellulose membrane or cotton fabric is studied. Diffusion experiments of polyethylene glycol of molecular weight 400, 1000, 2000, 4600, 8000, and 10000 through cellulose membrane or fabric was carried out in a glass U-tube diffusion apparatus and the half penetration times and the penetration coefficients were determined. Both the half penetration times and the penetration coefficients exhibited a significant change between molecular weight 2000 and 2500 as the molecular weight of polyethylene glycol increased, suggesting that there is a critical molecular weight above which diffusion/penetration becomes difficult. Based on this study on a model compound, it is suggested that polymeric textile finishing agents can be expected to exhibit similar behavior.

• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• 대한본초학회지
• /
• 제28권1호
• /
• pp.23-31
• /
• 2013

Objectives : The purpose of this study was to determine the anti-obesity effect and molecular mechanism of YY312, a herbal extract composed of Imperatae Rhizoma, Citri Unshius Pericarpium Immaturus, and Evodiae Fructus, on a high-fat diet-induced animal model and on 3T3-L1 cells. Methods : C57BL/6 mice were fed for 6 weeks with a normal diet or a high-fat diet (HFD). Then they orally administered daily with 300 mg/kg YY312 for next 10 weeks. Body weight and food consumption were recorded weekly and daily, respectively. Tissue weights, serum lipid, and glucose levels were analyzed at the end of the study. Additionally, the effects of YY312 on adipocyte differentiation in 3T3-L1 cells were examined. After differentiating 3T3-L1 cells were treated with YY312, Oil-red O staining, RT-PCR, and Western blotting were performed for lipid accumulation, mRNA expression of adipogenesis gene, and AMP-activated protein kinase (AMPK) phosphorylation, respectively. Results : YY312-administered mice showed a significant reduction of body weights and abdominal adipose tissue weights. YY312 also reduced the serum levels of triglycerides and total cholesterol, compared with the HFD group. Treatment with YY312 inhibited lipid accumulation and blocked expression of adipogenic transcription factors and lipogenesis genes, including peroxisome proliferator-activated receptor ${\gamma}$, CCAT/enhancer binding protein ${\alpha}$ and fatty acid synthase. YY312 increased AMPK phosphorylation in 3T3-L1 adipocytes. Conclusions : This study showed that herbal extract YY312 has an anti-obesity effect in vitro and in vivo. Thus, YY312 could be developed as a supplement for reduction of body weight gain induced by an HFD.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.30-39
• /
• 1998

Effect of cationic starches and anionic colloidal silica on retention and drainage characteristics of Compozil system was investigated. Depending upon the degree of substitution and molecular weight of cationic starches and morphological characteristics of anionic colloidal silica, retention and drainage properties of Compozil system were significantly influenced. When cationic starch addition level increased above a certain limit retention and stock freeness were decreased. To elucidate this an electrostatic coagulation mechanism occurring between unadsorbed starch molecules and anionic colloidal silica was proposed. Unstructured colloidal silica showed greater improvement in retention than structured colloidal silica. Cationic corn starches with different degree of substitution and molecular weights were prepared and their effect as a constituent of Compozil system was also evaluated. By controlling the molecular weight and degree of substitution of cationic corn starch it was possible to achieve significant improvement in fines retention. Cationic corn starch with higher degree of substitution maintained its retention efficiency even when the stock conductivity was increased. Turbidity measurement technique was found to be a simple and useful method to measure the retention characteristics.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
• /
• pp.86-87
• /
• 2000

Chitosan (deacetylated form of chitin) possesses strong antibacterial activities such as antimicrobial effect, antifungal effect and the induction of plant defense response. Chitosan itself, however, has high molecular weight and viscosity as well as water-insolubility, These natures may restrict applications in various fields, especially in in vivo system. While the hydrolysates of chitosan, chitooligosaccharides (COS) are not only lower in the molecula. weight and viscosity, but also water-soluble. Thus, they would be expected more efficient absorption in vivo. Besides several documents have been reported antibacterial activities of COS against microorganisms (Kendra et al., 1989; Uchida et al., 1989). (omitted)