• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.401-412
• /
• 2016

It is extremely difficult to apply conventional grouting methods to subsea tunnelling construction in the high water pressure condition. In such a condition, the rapid artificial freezing method can be an alternative to grouting to form a watertight zone around freezing pipes. For a proper design of the artificial freezing method, the influence of salinity on the freezing process has to be considered. However, there are few domestic tunnel construction that adopted the artificial freezing method, and influential factors on the freezing of the soil are not clearly identified. In this paper, a series of laboratory experiments were performed to identify the physical characteristics of frozen soil. Thermal conductivity of the frozen and unfrozen soil samples was measured through the thermal sensor adopting transient hot-wire method. Moreover, a lab-scale freezing chamber was devised to simulate freezing process of silica sand with consideration of the salinity of pore-water. The temperature in the silica sand sample was measured during the freezing process to evaluate the effect of pore-water salinity on the frozen rate that is one of the key parameters in designing the artificial freezing method in subsea tunnelling. In case of unfrozen soil, the soil samples saturated with fresh water (salinity of 0%) and brine water (salinity of 3.5%) showed a similar value of thermal conductivity. However, the frozen soil sample saturated with brine water led to the thermal conductivity notably higher than that of fresh water, which corresponds to the fact that the freezing rate of brine water was greater than that of fresh water in the freezing chamber test.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.398-409
• /
• 2018

Organic farming practices including loach based ecosystem-farming have been demonstrated to be effective in conjunction with rice farming to increase yield and quality. This new form of farming combines agriculture and fishery and is quickly developing into a new industry. The current study investigated the effect of rice-fish mixed farming system on the vegetation-diversity function. Vegetation within the four study sites was surveyed and analyzed based on plant taxonomy. The vegetation survey demonstrated that 127 taxa of 38 families, 100 genera, 107 species, and 20 varieties occurred within the study sites. A total of 15 plant species taxa occurred in the rice-fish mixed paddy fields with a fish habitat and did not occur in the conventional paddy field lacking fish habitat. This difference is thought to arise from differences in moisture requirements for vegetation. Life form analysis demonstrated differences in hemicryptophytes, therophytes, and hydrophytes according to fish habitat. The naturalized plants identified were also determined to be species widely distributed throughout Korea. Frequency analysis demonstrated that the rice-fish mixed paddy fields with a fish habitat had a high ratio of both obligate and facultative wetland plants relative to the conventional paddy field. Based on the study results, it is likely that vegetation-diversity will increase with environment diversity. However, no statistical significance was observed according to paddy types. Future research should aim to identify additional environmental factors, including the existence of fish habitat, habitat area, depth of fish habitat, hydrological parameters, water quality, and paddy soil environment, to enhance vegetation-diversity and biocultural diversity.

• Journal of the Korean Regional Science Association
• /
• v.39 no.1
• /
• pp.53-66
• /
• 2023

Due to COVID-19, the external activities of urban residents have greatly shrunk, causing a lot of damage to the commercial district, such as a decrease in population and sales. The downturn in commercial districts means the collapse of the infrastructure of the national economy, and can have serious side effects on the local economy and individual lives. Therefore, it is necessary to look at the alley commercial area, which is closely related to the national local economy, and pay attention to the damage and stagnation of the alley commercial area where small business owners are concentrated. The purpose of this study is to classify alley commercial districts into growth commercial districts and decline commercial districts by using commercial sales time series data and DTW time series group analysis for the pre- and post-COVID-19 period. The main findings of the study are as follows. First, using the time series data on commercial sales before and after COVID-19, the alley commercial districts were divided into growth commercial districts and decline commercial districts, and it was confirmed that the distribution of growth commercial districts and decline commercial districts was regionally different. Therefore, it is necessary to actively manage commercial districts in areas where many declining commercial districts are distributed, and it is required to prepare policies for each region in consideration of the spatial distribution of declining commercial districts. Second, during the COVID-19 period, face-to-face essential industries, density of guest facilities, and population density negatively affected the sustainability of commercial districts, which is the opposite of previous studies. This is the result of empirically confirming the specificity of the COVID-19 period and the negative effects of the integrated economy, and can be used as basic data for effective commercial district management and policy preparation in the event of a national disaster in the future. Third, the characteristics of the background of the commercial district had a significant effect on the sustainability of the commercial district, and the negative effect of the attracting facilities inducing population concentration in the background area was found. This suggests that it is necessary to consider the characteristics of the background as well as the inside of the commercial district when establishing policies to revitalize the commercial district and support small business owners in a national disaster situation.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.19-30
• /
• 2010

Bentonite-based grout has been widely used to seal a borehole constructed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because of its high swelling potential and low hydraulic conductivity. Three types of bentonites were compared one another in terms of viscosity and thermal conductivity in this paper. The viscosity and thermal conductivity of the grouts with bentonite contents of 5%, 10%, 15%, 20% and 25% by weight were examined to take into account a variable water content of bentonite grout depending on field conditions. To evaluate the effect of salinity (i.e., concentration of NaCl : 0.1M, 0.25M, and 0.5M) on swelling potential of the bentonite-based grouts, a series of volume reduction tests were performed. In addition, if the viscosity of bentonite-water mixture is relatively low, particle segregation can occur. To examine the segregation phenomenon, the degree of segregation has been evaluated for the bentonite grouts especially in case of relatively low viscosity. From the experimental results, it is found that (1) the viscosity of the bentonite mixture increased with time and/or with increasing the mixing ratio. However, the thermal conductivity of the bentonite mixture did not increase with time but increased with increasing the mixing ratio; (2) If bentonite grout has a relatively high swelling index, the volume reduction ratio in the saline condition will be low; (3) The additive, such as a silica sand, can settle down on the bottom of the borehole if the bentonite has a very low viscosity. Consequently, the thermal conductivity of the upper portion of the ground heat exchanger will be much smaller than that of the lower portion.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.976-983
• /
• 2023

Purpose: The dynamic behavior of a bridge structure under seismic loading depends on many uncertainties, such as the nature of the seismic waves and the material and geometric properties. However, not all uncertainties have a significant impact on the dynamic behavior of a bridge structure. Since probabilistic seismic performance evaluation considering even low-impact uncertainties is computationally expensive, the uncertainties should be identified by considering their impact on the dynamic behavior of the bridge. Therefore, in this study, a global sensitivity analysis was performed to identify the main parameters affecting the dynamic behavior of bridges with I-curved girders. Method: Considering the uncertainty of the earthquake and the material and geometric uncertainty of the curved bridge, a finite element analysis was performed, and a surrogate model was developed based on the analysis results. The surrogate model was evaluated using performance metrics such as coefficient of determination, and finally, a global sensitivity analysis based on the surrogate model was performed. Result: The uncertainty factors that have the greatest influence on the stress response of the I-curved girder under seismic loading are the peak ground acceleration (PGA), the height of the bridge (h), and the yield stress of the steel (fy). The main effect sensitivity indices of PGA, h, and fy were found to be 0.7096, 0.0839, and 0.0352, respectively, and the total sensitivity indices were found to be 0.9459, 0.1297, and 0.0678, respectively. Conclusion: The stress response of the I-shaped curved girder is dominated by the uncertainty of the input motions and is strongly influenced by the interaction effect between each uncertainty factor. Therefore, additional sensitivity analysis of the uncertainty of the input motions, such as the number of input motions and the intensity measure(IM), and a global sensitivity analysis considering the structural uncertainty, such as the number and curvature of the curved girders, are required.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.97-103
• /
• 2006

Vitellogenin(Vg) is a sex specific serum protein present in sexually maturing female blood of oviparous vertebrates. Estrogen($E_2$) is a main inducer of hepatic Vg synthesis. We investigated the effects of androgen and growth hormone(GH) on regulation of Vg and estrogen receptor(ER) genes in Japanese eel. Immature eels($200{\sim}250\;g$) were given a single injection of $E_2(5{\sim}5,000\;{\mu}g/kg\;bw)$ alone, or in combination with eel recombinant GH(eGH, $1{\sim}10\;{\mu}g/kg$) or methyltestosterone(MT, $1{\sim}5\;mg/kg$) and sacrificed 10 days after the hormone treatments. Expression levels of ER and Vg genes from the liver were determined by means of reverse transcription and polymerase chain reaction(RT-PCR). Administration of $E_2$ stimulated Vg gene expression in a dose dependent manner. Levels of Vg mRNA after the injection of $E_2(500\;{\mu}g/kg)$ with MT(5mg/kg) or eGH($10\;{\mu}g/kg$) were much higher than in that of $E_2$ alone($500\;{\mu}g/kg$). Whereas, injection of either vehicle, eGH ($10\;{\mu}g/kg$) or MT(5mg/kg) alone did not induce the expression of Vg gene in the liver. ER mRNA was detected from the fish treated with vehicle alone. $E_2$ injection($5{\sim}500\;{\mu}g/kg\;bw$) increased this ER expression but dose dependent response was not clear. Addition of MT(5mg/kg) or eGH($10\;{\mu}g/kg$) did not affect $E_2-stimulated$ ER mRNA expression. This study confirms the necessity of $E_2$ as the primary factor for Vg gene expression and requirement of additional hormones such as MT or GH for the full expression of Vg mRNA, and suggests that the additive effect of MT or GH on Vg gene expression would be mediated by some unknown factors other than ER.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1999.06a
• /
• pp.97-117
• /
• 1999

This study was performed to investigate the effect of pork on the cadmium detoxification in rats. Ninety male Sprague-Dawley rats weighing $125.3{\pm}1.4g$ were divided into five groups based on cadmium treatment(0, 25, 50, 100, 250ppm) and five levels of Cd in AIN-76 purified diet had been fed for 8 weeks. Cadmium was supplemented with a form of $CdCl_2$.. During following 8 weeks of intoxication, casein was replaced by pork and the effect of pork on cadmium- detoxification was compared with casein. After 8 weeks of Cd intake had resulted in apparent cadmium intoxication; reduced growth rate, enlarged kidney and testis, decreased hematocrit value and hemoglobin content in response to the supplemented Cd levels in the diets. Discontinuing cadmium feeding, the body weights were relieved. Pork-fed groups seemed to have higher body weight than casein-fed groups. Hemoglobin content and hematocrit value became normal range at detoxification stage. The weights of liver, kidney, and testis were decreased along with cadmium intake. However, organ weight ratio was not affected by cadmium. Cadmium accumulation in liver and kidney showed a tendency to increase in the cadmium-exposed groups. The levels of metallothionein were also significantly elevated in the tissues of liver in response to the levels of Cd supplemented(p<0.05). Cadmium concentration in kidney was two times higher than that in liver. Cadmium removal rate of liver was higher than that of kidney. Cadmium accumulation of the pork-fed group was lower than that of casein. Especially, the factors which affected the cadmium contents in kidney were $Cd^{***}$ and $Cd{\times}pork^{***}$. Metallothionein(MT) was increased with cadmium, and MT was not likely to be affected by pork. Based on the findings from gross lesion, rats fed 250ppm of Cd were externally emaciated, had exposed penis and observed atrophies of kidney and testis. Histopathological observation seemed that the liver of groups feeding Cd supplemented diets showed cellular degeneration and accumulation of eosinophilic materials in the capillaries. In kidney, rats fed Cd diets had shown tubular epithelium degeneration and lesions of basophilic materials, while testis were weakened in numbers of spermatid and sporadically enlarged of giant cells. But the rats administered cadmium-detoxified diet supplemented pork for 7 weeks were shown individually decreased lesions compared with the rats supplied with casein diet.

• Korean Journal of Poultry Science
• /
• v.43 no.4
• /
• pp.253-261
• /
• 2016

Egg quality is a very important factor for both consumers and producers. Factors affecting egg quality include strain and age of hens; egg storage temperature, time, and humidity; laying season; and feeding. This study aimed to determine the effect of hen age and egg storage time on egg quality. A total of 700 eggs obtained from Hyline Brown commercial layers were used for this experiment, and they were separated into two hen age groups (30 vs. 60 weeks) with eight treatments and four storage times (day 0, 10, 20, and 30). The egg weight; shell color, thickness, and density; albumen height; Haugh unit (HU); yolk color; and the yolk and albumen pH and viscosity were measured for the egg quality assessment. The results showed that the age of the hen and egg storage time significantly affected almost all parameters of the internal and external egg quality. The shell thickness, albumen height, HU, yolk color, pH of yolk and albumen, and yolk viscosity significantly decreased with increasing hen age. The egg shell color was significantly lighter in eggs from 60-week-old hens than in those from 30 weeks-old hens. The egg weight; shell weight, thickness, and density; albumen height, HU; and albumen viscosity significantly decreased, but the yolk color and pH of the yolk and albumen increased with increasing egg storage time. The interaction effects between the storage time and hen age were significant in shell thickness, albumen height, yolk color, and yolk and albumen pH and viscosity. The eggs obtained from 60-week-old hens showed significantly lower shell thickness, albumen height, and HU values, which are considered typical egg quality measurements, than values of eggs from 30-week-old hens. Therefore, increasing hen age and egg storage time caused the deterioration of egg quality. In conclusion, this study demonstrated that hen age is the major factor affecting the quality of fresh eggs, whereas the storage time is the determinant factor affecting the quality of stored eggs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.180-188
• /
• 2014

It is very important accurate diagnosis and quick treatment in cerebrovascular disease, i.e. stenosis or occlusion that could be caused by risk factors such as poor dietary habits, insufficient exercise, and obesity. Time-of-flight magnetic resonance angiography (TOF-MRA), it is well known as diagnostic method without using contrast agent for cerebrovascular disease, is the most representative and reliable technique. Nevertheless, it still has measurement errors (also known as overestimation) for length of stenosis and area of occlusion in celebral infarction that is built by accumulation and rupture of plaques generated by hemodynamic turbulence. The purpose of this study is to show clinical trial feasibility for 3D-SPACE T2, which is improved by using signal attenuation effects of fluid velocity, in diagnosis of cerebrovascular disease. To model angiostenosis, strictures of different proportions (40%, 50%, 60%, and 70%) and virtual blood stream (normal saline) of different velocities (0.19 ml/sec, 1.5 ml/sec, 2.1 ml/sec, and 2.6 ml/sec) by using dialysis were made. Cross-examinations were performed for 3D-SPACE T2 and TOF-MRA (16 times each). The accuracy of measurement for length of stenosis was compared in all experimental conditions. 3D-SPACE 2T has superiority in terms of accuracy for measurements of the length of stenosis, compared with TOF-MRA. Also, it is robust in fast blood stream and large stenosis than TOF-MRA. 3D-SPACE 2T will be promising technique to increase diagnosis accuracy in narrow complex lesions as like two cerebral small vessels with stenosis, created by hemodynamic turbulence.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.