• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1165-1172
• /
• 2009

두 개의 평판이 직각으로 만나는 corner에서 형성되는 층류 경계층을 입자영상유속계 기법을 이용하여 측정하였다. 자유류 유속은 2.96 ~ 3.0 m/s, 층류 경계층이 형성 될 수 있도록 모델에 대한 유동의 입사각을 1.2도로 하여 작은 순 압력구배를 제공하였다. 모델의 앞전은 둥근 형상으로 처리하였으며 모델의 길이는 약 1000mm이다. 측정 결과는 이등분면에서 corner 경계층의 전형적인 특징인 변곡점을 가지는 박리형 속도 분포를 보여주었다. 이등분면에서 멀어져 감에 따라 속도 분포는 평판의 Blasius 분포로 변해가고, 이등분면 경계층 두께의 약 절반만큼 평판을 따라 멀어지면 변화가 완료된다. 앞전에서부터 하류로 감에 따라 이등분면에서의 경계층 성장 및 속도 분포의 유사 상사성을 측정 결과로부터 확인하였다.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1269-1278
• /
• 2013

엔드밀링 공정은 형상창성기구의 특성 상, 절삭면적의 주기적인 변화를 피할 수 없다. 그러므로, 본 연구에서는, 가공 중 절삭날과 공작물 사이의 간섭영역에 해당하는 절삭면적의 모델을 확립하여, 가공면 형상 특성과 절삭면적의 관계를 규명하고자 한다. 대상 가공면은 측벽을 선정하였으며, 형상 특성은 축 방향 진직도를 선택하였다. 절삭면적 및 축방향 진직도에 영향을 미치는 특이점 추정 모델의 타당성은 반경 방향 및 축 방향 절삭깊이를 변화시키며 엔드밀링 가공을 수행하여 검증하였다. 연구 결과, 배분력이 음의 값을 갖지 않는 안정적인 엔드밀링 가공의 경우, 상향절삭은 절삭면적이 증가했다. 일정해지는 영역에서, 하향절삭은 절삭면적이 일정했다 감소하는 영역에서 가공면을 창성하며, 영역이 변화될 때 가공면에 특이점이 발생하는 것이 확인되었다.

• 한국측량학회지
• /
• 제26권4호
• /
• pp.443-452
• /
• 2008

본 연구에서는 항공사진과 LiDAR 데이터를 융합하여 항공사진에 나타난 건물의 형상을 표현하는 3차원 선형정보를 추정하기 위하여 두 가지 과정을 수행하였다. 첫째, LiDAR 데이터를 영상과 같은 2D의 투영된 데이터로 만들었다. 이를 위하여 LiDAR 데이터의 특성상 정보가 부족한 건물경계 지역에서 가시성 문제를 해결하기 위해, 가상점을 추가한다. 수정된LiDAR데이터를 불규칙 삼각망으로 구성하고, 영상에서의 가시 삼각형을 판단하여, 영상화소값마다 삼각망 정보를 참조할 수 있게 한다. 둘째, 추출된 가시지역 정보와2D불규칙삼각망을 결합하여 입체영상으로부터3차원 선분을 추출하였다.입체영상에 존재하는 선분은 TIN기반의 정합방법을 사용하였다. TIN기반의 정합조건은 기존의 공액기하 사변형 조건보다 에지정합쌍 탐색율을 약 20% 향상시킬 수 있었다.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.124-132
• /
• 1999

Thermal fatigue strength of the solder joints is the most critical issue for TSOP(Thin Small Outline Package) because the leads of this package are extremely short and thermal deformation cannot be absorbed by the deflection of the lead. And the TSOP body can be subject to early fatigue failures in thermal cycle environments. This paper was discussed distribution of thermal stresses at near the joint between silicon chip and die pad and investigated their reliability of solder joints of TSOP with 42 alloy clad lead frame on printed circuit board through FEM and 3 different thermal cycling tests. It has been found that the stress concentration around the encapsulated edge structure for internal crack between the silicon chip and Cu alloy die pad. And using 42 alloy clad, The reliability of TSOP body was improved. In case of using 42 alloy clad die pad(t=0.03mm). $$\sigma$_{VMmax}$ is 69Mpa. It is showed that 15% improvement of the strength in the TSOP body in comparison with using Cu alloy die pad $($\sigma$_{VMmax}$=81MPa). In solder joint of TSOP, the maximum equivalent plastic strain and Von Mises stress concentrate on the heel of solder fillet and crack was initiated in it's region and propagated through the interface between lead and solder. Finally, the modified Manson-Coffin equation and relationship of the ratio of $N_{f}$ to nest(η) and cumulative fracture probability(f) with respect to the deviations of the 50% fracture probability life $(N_{f 50%})$ were achieved.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.45-52
• /
• 2003

Red ginsengs are inspected manually by examining those in the dark room with back light illumination. Manual inspection is often influenced by physical condition of inspectors. Sometimes. the best grade, heaven. has some inner holes though it was inspected by a specialist. In order to resolve this problem, this study was performed to develop image processing algorithm to detect the inner holes in the x-ray image of ginseng. Because of little gray value difference between background and ginseng in the image. simple thresholding method was not appropriate. Modified watershed algorithm was used to differentiate the inner holes from background and normal ginseng body. Inner hole edge region detected by watershed algorithm consists of many number of blobs including normal portions. With line profile analysis with scanning one line at a time beginning the starting point. it shelved two peaks both ends representing extracting each blobs. in which setting threshold value as of lower peak value enabled us to obtain inner hole image. Once this procedure has to be done till the finishing point it is completing inner hole detection for one blob. Thus. conducting ail blobs by this procedure is completing inner detection of one whole ginseng. Detection results of the inner holes fer various size of red ginsengs were good even though there was small detection variation. 6.2%. according to position of x-rat tube.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.341-348
• /
• 2002

Quality evaluation of red ginsengs is determined by outer shape and inner qualities. Especially, the inner qualities are main grading criteria. Currently, red ginsengs are classified into 3-grades; heaven, earth and good. The best heaven grade must not include inner holes and sponge tissues. This study was conducted to develop a red ginseng sorting system using x-ray image processing technique. Because of lens characteristic, gray values of the central region in the x-ray image are higher and gradually decreased towards the edge regions. This difference of gray values gives trouble in segmentation and detection of inner holes in red ginseng image, so preprocessing technique is necessary. The preprocessing was done by subtracting source image from an empty background image. But, simple subtraction was not quite appropriate because of too small contrast between inner holes and sound part. Scaled subtraction images were obtained by multiplying all gray values by some numbers. However this method could not help to set threshold value because the gray values of root part are generally lower than body part when red ginseng is exposed to the x-ray. To determine threshold value for detecting inner holes, an algorithm was developed by increasing overall gray values of less clear images.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.235-241
• /
• 2017

Purpose: It is to develop an agricultural three-directional dumping vehicle that can help farmers reduce intensive labor when carrying heavy loads and for easy dumping. In addition, a novel mechanism was applied for controlling the direction of the tilting cargo box by using a single hydraulic cylinder and simple apparatus. The overturning safety was analyzed to provide safe-use ground slope region of the vehicle to be used at upland fields and orchards. Methods: The developed three-directional dumping vehicle was constructed using a cargo box, vehicle frame, driving components, lifting components, and controller. The novel mechanism of controlling the dumping direction involves the operation of two latching bars, which selectively release or collapse the connecting edge between the vehicle frame and cargo box. A multibody dynamics analysis software (RecurDynV8R5) was used to determine the safe-use ground slope area when tilting the cargo box at slopes. A computer analysis was conducted by increasing the ground slope while rotating the vehicle when the cargo box comprised loads of 300 and 500 kg and stacking heights of 40 and 80 cm, respectively. Results: The three-directional dumping vehicle was successfully manufactured, and the cargo box was tilted at $37^{\circ}$ and $35^{\circ}$ for dumping forward and sideways. The latching bars were manually and selectively collapsed with the vehicle frame to control the dumping direction. When forward dumping, the safe-use ground slope was over $20^{\circ}$ in all vehicle directions and loaded conditions. Conclusions: A three-directional dumping vehicle was developed to reduce labor-intensive work in the farming environment. The user can easily control the dumping direction by using the control panel. The vehicle was safe to be used in most of the Korean upland fields and orchards (area over 96%) for the forward dumping.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.264-265
• /
• 2014

This Paper reports the photocatalytic activity of $g-C_3N_4/NaTaO_3$ hybrid composite photocatalysts synthesized by ball-mill method. The $g-C_3N_4$ and $NaTaO_3$ were individually prepared by Solid state reaction and microwave hydrothermal process, respectively. The $g-C_3N_4/NaTaO_3$ composite showed the enhanced photocatalytic activity for degradation of rhodamine B dye (Rh. B) under simulated solar light irradiation. The results revealed that the band-gap energy absorption edge of hybrid composite samples was shifted to a longer wavelength as compared to $NaTaO_3$ and the 50 wt% $g-C_3N_4/NaTaO_3$ hybrid composite exhibited the highest percentage (99.6 %) of degradation of Rh. B and the highest reaction rate constant ($0.013min^{-1}$) in 4 h which could be attributed to the enhanced absorption of the hybrid composite photocatalyst in the UV-Vis region. Hence, these results suggest that the $g-C_3N_4/NaTaO_3$ hybrid composite exhibits enhanced photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation in comparison to the commercial $NaTaO_3$.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.79-84
• /
• 2005

평판 표면에 충돌하는 축대칭, 과소팽창 제트에 대한 실험적 연구가 수행되어졌으며, 벽압력 및 단열 벽온도 분포가 자세히 측정되어졌다. 벽온도 분포 결과에 대한 설명을 위하여 자유제트 내에서의 전온도 값을 전온도 탐침을 사용하여 측정하였다. 본 연구에서 실험 변수로는 과소팽창비와 노즐-평판간 거리가 고려되었다. 노즐-평판 간 거리에 따라 제트 경계 및 충돌면에서의 에너지 박리에 의해 서로 다른 형태의 단열 벽온도 분포가 나타났으며, 과소팽창비가 큰 경우, 중심영역에서의 저온 유체 입자의 고립효과로 정체점의 회복계수가 크게 낮아지는 현상 또한 관찰되었다.

• 한국분무공학회지
• /
• 제5권3호
• /
• pp.17-26
• /
• 2000

The main parameter commonly used to evaluate spray distribution is spray angle. Spray angle is important because it influences the axial and radial distribution of the fuel. Spray angles were measured and compared for the two non-air assisted injectors such as 2hole-2stream 4hole-1stream injectors used for port fuel injection gasoline engines with n-heptane as a fuel by three different measuring techniques, i.e., digital image processing, shadowgraphy, and spray patternator, respectively. Fuel was injected with the injection pressures of 0.2-0.35 MPa into the room temperature and atmospheric pressure environment. In digital image processing approach, the selection of the transmittance level is critical to obtain the edge of spray and hence to measure the spray angle. From the measurement results by the shadowgraphy technique, it is dear that the spray angle is varied during the spray injection period. The measurement results from spray patternator show that the different spray angles exist in different region. Spray angle increases with the increase in the injection pressure. it is suggested that the spray angle and stream separated angle should be specified when spray is characterized for 2hole-2stream injector, because spray angle is much different though stream separated angle is same. It was also considerably affected by the measurement techniques introduced in this experimental work. However, the optimal axial distance for measuring the spray angle seems to be at least 60-80 mm from the injector tip for two non-air assisted injectors.