• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2005

In this paper, experimental methods about the flow behavior of thin polymer film by various edge patterns in the spin coating process for stable cover layer coating of a blu-ray disc is described. The blu-ray disc, a next-generation optical disc format over 25GB, consists of a 1.1m thick substrate and a 0.1mm tick cover layer. Generally, cover layer on the blu-ray disc is made by the polymer spin coating process. However, it is hard to secure sufficient coating uniformity around the rim on the cover layer. In order to get the uniform thickness deviation and to minimize the bead around the rim, the edge of the disc substrate can be modified into various patterns, such as normal plain, trench, step and chamfer pattern, etc, around the rim on the disc and experimented with various parameters, such as surface tension, viscosity, coating time, temperature and rotation speed, etc. And the optimal shape of the rim was tried to get by 3 dimensional computer simulation of the polymer expulsion process.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.16-26
• /
• 1989

임의의 각을 가진 쇄기형 유전체의양 경계면을 E-편파된 평면화가 입사할 경우 발생하는 전자파의 회절패턴을 기하광학해와 모서리회절파의 합으로 표시하였다. 모서리 회절파의 회절계수는 물리광학근사로 구한 회절계수를 모서리 끝에 분포한 다극선전원으로 수정하여 구하였다. 쇄기각 $120^{circ}$, 입사각 $60^{circ}$ 인 유전체의 비전율을 2, 5, 10으로 변화시키고, 측정거리도 모서리 끝점으로 부터 5와 10파장인 경우에 대해 기하광학해와, 물리광학해, 다극선전원으로 교정한 수정해 순으로 각각의 회절패턴을 그림으로 나타내었다. 본 논문에서 구한 수정해는 모서리 끝점으로 부터 멀리 떨어진 곳에서만 유용한 점근해임을 알 수 있으나, 유전체 경계면에서 경계조건을 만족함을 보였다.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.427-446
• /
• 2022

Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (d_s/b_s) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1581-1587
• /
• 2021

임베디드 시스템의 활발한 사용으로 스마트 팩토리와 같이 여러 에지가 모여서 함께 복합적인 동작을 하게 되는 멀티 에지 시스템들이 동작되고 있다. 멀티 에지 시스템에서 하나의 에지에서의 이상 동작이 다른 에지로 전달되거나 전체 시스템이 다운되는 경우가 자주 발생한다. 이러한 시스템에서 각 에지의 이상 동작을 판단하고 제어하는 것이 중요하지만, 이는 성능의 한계가 존재하는 작은 에지의 임베디드 시스템에 부하를 가한다. 이러한 시스템에서 우리는 전력 소비 데이터를 사용하여 에지 장치의 상태를 확인하고 이를 QR코드 기반으로 데이터를 전송하여 서버에서 이상 동작을 확인하고 제어하려 한다. 논문에서 제안된 아키텍처는 에지의 전력 소모 데이터를 측정하기 위해 'chip-whisperer'를 사용하고 서버를 구현하기 위해 '라즈베리 파이'를 사용하여 구현하였다. 그 결과 제안된 아키텍처서버는 성공적인 데이터 전송 및 이상 동작 판정을 보였으며 에지에서 추가 부하가 나타나지 않음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.148-155
• /
• 2008

본 논문에서는 웨이퍼 에지 노광장비에 핵심 부분인 웨이퍼의 편심오차의 측정알고리즘과 플랫/노치의 방향을 해석하는 알고리즘을 제안하였다. 또한 새로 제안된 알고리즘을 전산 시뮬레이션을 통해 그 유효성을 확인하였으며 제작된 웨이퍼 에지 노광기에 적용하여 실제 장비에 적용 가능함을 확인하였다. 제안된 알고리즘을 위해 필요한 웨이퍼 에지 위치 검출방식에 있어 과거의 접촉식 방법을 사용함으로서 발생하는 파티클의 오염을 제거하기 위해 선형 CCD 센서를 적용한 비접촉 방식의 데이터 측정법을 적용함으로서 파티클의 오염을 제어 할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1368-1371
• /
• 2007

Laser-ablated ITO patterns showed the formation of shoulders at the edge of the ITO lines and a ripple-like structure of the etched bottom. When the laser ablation was applied in the fabrication of PDP panel, the laser-ablated ITO patterns showed a higher sustaining voltage than that of chemically wet-etched ITO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.129-133
• /
• 2005

An integrated pattern profile distortion is newly proposed to analyze various two-dimensional test patterns. The unit is converted to a time to make parameters comparable for various types of displays. In addition, this can be compared with that of extended blur edge width in time scale, which has been reported.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.24-31
• /
• 1998

The far-zone magnetic field patterns of a E-plane horn antenna with various edge structures are analyzed using UTD. The ray tracing method is used to lacate the shadow boundaries, and then GO and UTD are utilized to evaluate the incident, reflected, diffracted, surface diffaracted, and the second order diffracted, diffracted-reflected, and diffracted-reflected-diffracted waves existing in each region of interest. By doing this, we analyzed the effects of flanges or caps connected on the edge of a horn antenna on the side lobe and back lobe levels. Also, the validity of this paper is proved by comparing the analytical results with those of measurement and method of moment presented in the reference.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1174-1180
• /
• 2001

Various experimental data, including mixing areas, cross correlation factors, surface flow patterns on nozzle walls, and far field noise spectra, was used to draw a noise control mechanism in a supersonic jet. In the underexpanded case, mixing of the jet air with ambient air was significantly enhanced as presented before, and mixing noise was also dramatically reduced. Screech tones, in the overexpanded case, were effectively suppressed by trailing edge modifications, although mixing enhancement was not noticeable. From mixing and noise performance of nozzles with modified trailing edges, enhancing mixing through streamwise vortices seems an effective way to reduce mixing noise in the underexpanded flow regime. However, screech tones in the overespanded flow regime is well controlled or suppressed by making shock cells and/or spanwise large scale structures irregular and/or less organized by a proper selection of trailing edges. The noise field in the overexpanded flow regime was greatly affected by the symmetricity of the nozzle exit geometry. In the underexpanded flow regime, the effects of the symmetricity of the nozzle exit on mixing were negligible.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.830-833
• /
• 2009

Deblocking Filter (DF) is newly introduced into H.264/AVC to remove blocky artifacts. It improves the picture quality and the improved picture is set to the frame buffer for motion compensation. As a result, higher coding efficiency is achieved by DF. However, if the original image has heavily-slanted patterns, DF removes the edges to be kept because it is applied only perpendicularly to the block boundaries. In this paper, we propose Edge Adaptive Deblocking Filter (EADF) which is applied not only for the perpendicular but also for several slanted directions to deal with the problem. Simulation results showed us that EADF was especially effective for the sequence "Foreman" with PSNR gain of 0.04 dB.