• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.132-139
• /
• 2012

Presented in the paper is a procedure to extract simplified triangular mesh from a height map (terrain data). The proposed algorithm works directly on a height map that extracts a simplified triangular mesh. For the simplification, the paper employs an iterative method of edge contractions. To determine an edge to be contracted, the contraction cost of an edge is evaluated through the QEM method. Normally, an edge contraction will remove two triangles sharing the edge. Although the edge contraction can be implemented easily on a triangular mesh, it is not viable to implement the operation on a height map due to the irregular topology. To handle the irregular topology during the simplification procedure, a new algorithm is introduced.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.651-658
• /
• 2018

We comprehensively investigated the wrinkles of a stiff layer covering a spherical void embedded in a rubber matrix after the void experienced inflation or contraction. We developed an easy experimental way to realize the inflation and contraction of the voids. The inflation took place in a void right beneath the surface of the matrix and the contraction happened in a void at the bottom of the rubber matrix. In the inflation, the wrinkle at the center of the deformation was random, and the pattern propagated into rabyrinthine, herringbone, and then oriented parallel lines as the position was away from the center of the inflation to the edge. The cracks were concentric, which were perpendicular to the parallel wrinkled pattern. In the contraction, the wrinkle was simply concentric around the surface of the void without any crack. The cracks were found only near the center of the deformation. The strain distribution in the stiff layer after the inflation and contraction was theoretically analyzed with simulations that were in excellent agreement with the experimental results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.244-248
• /
• 1997

In the rolling process, keeping the accuracy of the slab width is a very important problem. So the edge rolling is used with the plate rolling. But in the edge rolling, a local contraction of width, called "width necking", occurs in the top and tail portion of a slab and becomes the cause of crop loss. In this investigation, the three dimensional deformation behavior in the edge-plate rolling is simulated by rigid plastic FEM(PROLL). And the influence of the rolling condition on "width necking" and the accuracy of width is examined.

• 한국연소학회지
• /
• 제5권2호
• /
• pp.19-27
• /
• 2000

A turbulent combustion model, based on edge flame dynamics, is discussed in order to predict global extinction of turbulent flames. The model is applicable to the broken flamelet regime of turbulent combustion, in which global extinction of turbulent flame is achieved by gradual expansion of flame holes. The edge flame dynamics is the key mechanism to describe the flame hole expansion or contraction. For flames with Lewis numbers near unity, there is a $Damk{\ddot{o}}hler$ number, namely the crossover $Damk{\ddot{o}}hler$ number, at which edge flame changes its direction of propagation. The parametric region between the quasi-steady extinction condition and the edge-flame crossover condition is a metastable region, in that flames without edge can stay in their burning states while flames with edge have to retract to expand quenching holes. Using the above properties of edge flame, Hartley and Dold proposed a Lagrangian hole dynamics, which allows us to simulate transient variation of quenching holes. In their model, each stoichiometric surface is subjected to a random sequence of scalar dissipation rate compatible to the equilibrium turbulence. Then, each stoichiometric surface will evolve, according to the combustion map, dependent on the scalar dissipation rate and existence of flame edge, If all the burning surfaces are annihilated, the event can be declared as a global extinction. The consequence obtained from the above model also can be used as a subgrid model to determine local extinction occurring in a calculation grid.

• 전자공학회논문지CI
• /
• 제41권5호
• /
• pp.51-58
• /
• 2004

본 논문에서는 3D 모델의 체적 보존을 고려하는 메쉬 간략화 알고리듬을 제안하였다. 일반적으로 다른 대부분의 메쉬 간략화 알고리듬에서는 거리 기준을 사용한다. 거리는 기하학적인 오차를 측정하는 매우 효율적인 기준이기는 하지만 거리 기준만을 적용할 경우 원래 모델과 간략화된 모델 간에 체적 변화가 발생한다. 본 논문에서는 원래 모델의 간략화 과정 중에도 체적의 변화가 없는 메쉬 간략화 알고리듬을 제안한다. 본 알고리듬에서는 에지 하나를 줄이면서 체적의 변화가 일어나지 않는 정점 하나를 찾는 방식을 사용한다. 시뮬레이션을 통하여 제안하는 알고리듬이 비록 계산 시간은 좀 더 걸리지만 체적의 변화가 거의 없다는 장점을 가진 것을 확인하였다.

• Journal of Communications and Networks
• /
• 제15권3호
• /
• pp.321-328
• /
• 2013

In this paper, we present a technique for obtaining conflict-free schedules for real-time automation protocol for industrial Ethernet (RAPIEnet) switches. Mathematical model of the switch is obtained using graph theory. Initially network traffic entry and exit parts in a single RAPIEnet switch are identified, so that a bipartite conflict graph can be constructed. The obtained conflict graph is transformed to three kinds of matrices to be used as inputs for our simulation model, and selection of any of the matrix forms is application-specific. A greedy edge-coloring algorithm is used to schedule the network traffic and to solve the minimum coloring problem. After scheduling, empty slots are identified for forwarding the non real-time traffic of asynchronous devices. Finally, an algorithm for synchronizing the schedules of adjacent switches is proposed using edge-contraction and minors. All simulations were carried out using Matlab.

• 약학회지
• /
• 제56권6호
• /
• pp.377-381
• /
• 2012

The histidine-rich $Ca^{2+}$ binding protein (HRC) is a $Ca^{2+}$ binding protein in the sarcoplasmic reticulum (SR). In this study, we examined whether the HRC is involved in the regulation of cardiac contraction and $Ca^{2+}$ signaling using HRC knock-out (KO) mouse ventricular myocytes. In field-stimulated single mouse ventricular myocytes, cell shortenings and $Ca^{2+}$ transients were measured using a video edge detection and a confocal $Ca^{2+}$ imaging, respectively. Compared with the wide-type (WT) myocytes, the magnitudes of cell shortenings were significantly larger in HRC KO cells (P<0.01, WT vs. KO). The rate of contraction and relaxation was significantly accelerated in HRC KO myocytes (P<0.05 and P<0.01, respectively, WT vs. KO). The magnitudes of $Ca^{2+}$ transients were increased by HRC KO (P<0.01, WT vs. KO). In addition, the decay of the $Ca^{2+}$ transient was faster in HRC KO cells than in wild-type cells P<0.01, WT vs. KO). These results suggest that HRC may suppress SR $Ca^{2+}$ releases and decay of $Ca^{2+}$ transients during action potentials, thereby attenuating ventricular contraction and relaxation.

• The Korean Journal of Pain
• /
• 제6권1호
• /
• pp.105-108
• /
• 1993

A myofascial syndrome due to continuous muscle contraction with the trigger point at the upper lateral edge of the nuchal muscles where they attach to the occipital bone is frequently seen in daily pain clinic practice. The Tienchu syndrome is a myofascial condition of the posterior neck region with a trigger point at the Tienchu acupoint(B10). When advanced, occipital neuralgia and muscle contraction headache follow. Therefore, a Tienchu block and/or occipital nerve block with local anesthetic combined with a small dose of steroid is a most effective therapeutic method for many patients who complain of posterior headache or posterior neck pain.

• The Korean Journal of Physiology and Pharmacology
• /
• 제28권4호
• /
• pp.335-344
• /
• 2024

Diphenyleneiodonium (DPI) has been widely used as an inhibitor of NADPH oxidase (Nox) to discover its function in cardiac myocytes under various stimuli. However, the effects of DPI itself on Ca²⁺ signaling and contraction in cardiac myocytes under control conditions have not been understood. We investigated the effects of DPI on contraction and Ca²⁺ signaling and their underlying mechanisms using video edge detection, confocal imaging, and whole-cell patch clamp technique in isolated rat cardiac myocytes. Application of DPI suppressed cell shortenings in a concentration-dependent manner (IC₅₀ of ≅0.17 µM) with a maximal inhibition of ~70% at ~100 µM. DPI decreased the magnitude of Ca²⁺ transient and sarcoplasmic reticulum Ca²⁺ content by 20%-30% at 3 µM that is usually used to remove the Nox activity, with no effect on fractional release. There was no significant change in the half-decay time of Ca²⁺ transients by DPI. The L-type Ca²⁺ current (I_Ca) was decreased concentration-dependently by DPI (IC₅₀ of ≅40.3 µM) with ≅13.1%-inhibition at 3 µM. The frequency of Ca²⁺ sparks was reduced by 3 µM DPI (by ~25%), which was resistant to a brief removal of external Ca²⁺ and Na⁺. Mitochondrial superoxide level was reduced by DPI at 3-100 µM. Our data suggest that DPI may suppress L-type Ca²⁺ channel and RyR, thereby attenuating Ca²⁺-induced Ca²⁺ release and contractility in cardiac myocytes, and that such DPI effects may be related to mitochondrial metabolic suppression.

• 한국연소학회지
• /
• 제8권3호
• /
• pp.15-23
• /
• 2003

Partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics in order to develop a prediction model for turbulent flame lift off. The essence of flame hole dynamics is derivation of the random walk mapping, from the flame-edge theory, which governs expansion or contraction of flame holes initially created by local quenching events. The numerical simulation for flame hole dynamics is carried out in two stages. First, a direct numerical simulation is performed for constant-density fuel-air channel mixing layer to obtain the turbulent flow and mixing fields, from which a time series of two dimensional scalar dissipation rate array is extracted at a fixed virtual flame surface horizontally extending from the end of split plate to the downstream. Then, the Lagrangian simulation of the flame hole random walk mapping projected to the scalar dissipation rate array yields temporally evolving turbulent extinction process and its statistics on partial quenching characteristics. The statistical results exhibit that the chance of partial quenching is strongly influenced by the crossover scalar dissipation rate while almost unaffected by the iteration number of the mapping that can be regarded as a flame-edge speed.