• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.09a
• /
• pp.87-118
• /
• 1998

Advantage of Water -Easy to Get 10$^{7}$ km$^{3}$ except of ice -Economical -Safety -High Solubility(a large relatice dielectronic constant) -Easy to Re-use -Easy to Waste

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.629-634
• /
• 2000

Comparing with single structure constructed with reinforced concrete or steel, composite structures have a great advantage. However, in case of nuclear power structure, the application of a conventional single structure (reinforced concrete or steel structure) inflicts a heavy loss on a economical and constructive efficiency. But, the application of composite slab to nuclear power structure could compensate these deficiency. Therefore, in this study, the structural behavior of composite slab in nuclear power structure is observed to assure economical and constructive efficiency.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.473-476
• /
• 2006

As a part of efforts to obtain high quality and economical efficiency of concrete, blast-furnace slag has been utilized by means of cement replacement. Therefore superior performance can be ensured, environmental pollution can be prevented and economical advantage can be obtained with utilization by cement replacement. But the studies on the blast-furnace slag are not systematic and reasonable. So, it was planed that basic data in regard to technique of manufacturing and economic improvement of concrete is showed with experimental comparison and investigation of Fluidity and engineering properties of concrete utilizing blast-furnace, industry by-product, as cement replacement in this study.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2007

The purpose of this study is to suggest the design by using digital media the general hospital. The important result and advantage of the study are as follows; At first, applicability and maintenance of form and function design are enhanced and the digital media could be used for development of better and economical design. Secondly, the 3D CAD system useful for communication media and instructional tool for hospital planners and designers. Thirdly, fast and economical evaluation are obtained through the study of experimental simulation. Finally as a new tool in architectural field, the system helps to enhance the relationship between digital media and human. New concept and tools of hospital design are being developed in terms of its function, environment, and psychology. The computational design system should be improved for user friendly in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.5-8
• /
• 2003

As a part of efforts to obtain high quality and economical efficiency of concrete, blast-furnace slag has been utilized by means of cement replacement. Therefore superior performance can be ensured, environmental pollution can be prevented and economical advantage can be obtained with utilization by cement replacement. But the studies on the blast-furnace slag are not systematic and reasonable. So, it was planed that basic data in regard to technique of manufacturing and economic improvement of concrete is showed with experimental comparison and investigation of engineering properties of concrete utilizing blast-furnace, industry by-product, as cement replacement in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.5-8
• /
• 2003

As a part of efforts to obtain high quality and economical of efficiency of concrete, blast-furnace slag has been utilized by means of cement replacement. Therefore superior performance can be ensured, environmental pollution can be prevented and economical advantage can be obtained with utilization by cement replacement. But the studies on the blast-furnace slag are not systematic and reasonable. So, it was planed that basic data in regard to technique of manufacturing and economic improvement of concrete is showed with experimental comparison and investigation of engineering properties of concrete utilizing blast-furnace, industry by-product, as cement replacement in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.28-29
• /
• 2015

Although there are many applications with gypsum board because of its economical and construction advantages, four-layer construction technique, (hollow area between two-layer panel sets) is the general case to achieve the insulation, and resistance of horizontally applied force. Since this construction method has many problems such as complicate construction steps and increased cost, it is needed that the two-layer panel for improved construction and economical advantage for lightweight pane: thick panel with favorable performances. Therefore, in this research, based on the ALC panel with 10 to 30mm depth, feasibility of the paper reinforced panel as a lightweight wall material. As a result, favorable performance with increased flexural strength were achieved with paper reinforcement.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1209-1214
• /
• 2005

Prestressed concrete girder(PSC girder) bridges have been used widely at the railway as well as highway because they are great in the functional and economical efficiency. Also they have the advantage of convenience of design and construction. Generally, the PSC girder railway bridges with span length 25m are adopted in the country and it could be easily verified that the section of PSC girder using railway bridge is excessive design, which has much redundancy against design loads. Thus, in this paper the optimum design for PSC girder railway bridge with span length 30m is performed. And from the results of analysis it is suggested to denote the optimum section which satisfies the structural safety and economical efficiency all together.

• Steel and Composite Structures
• /
• v.51 no.1
• /
• pp.43-51
• /
• 2024

In the current study, we aim to evaluate both microstructural characteristics and economic benefits of composite structures from supply chain utilizing AI-based method. In this regard, the various aspects of microstructure of composite materials along with the features of supply chain are discussed and quantified. In addition, the final economic aspects of the composite materials and are also presented. Based on available data, a designed artificial neural network is utilized for prediction of both microstructure and economical feature of the composite material. The results indicate that the supply chain could affect the microstructure of final composite materials which in turn make changes in the mechanical properties and durability of composite materials.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.529-536
• /
• 2005

Recently the building of ultra large container ship are discussed among ship building companies and ship operating company who have a tendency to pursue the advantage of large scale of economy. These tendency will be continued for the time being, if ship-building skill and economical efficiency are available. As the enlargement of container ship size becomes hot issues in ship-building markets, the needs for re-arrangement of accommodation house in large container ship are proposed carefully in some researches. This study examined economical efficiency of re-arrangement of accommodation house in ultra large container ship. The separation between accommodation and engine room is proposed through out drawing works in initial design stage and we examined the merits and demerits of the separation in the view of economical efficiency. The RFR(Required Freight Rate) is considered as the objective function to evaluate the re-designed vessel. The economical benefits are analyzed in the view of ship operator and shipyard respectively.