• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.9-14
• /
• 1986

The primary purpose of this paper is to make the management of small business aware of the potential and further, to assist their decision on purchasing and applying the personal computers to their business problems. With emphasis on the step by step expansion various computer hardware systems are reviewed, compared and evaluated in its price, micro-processor, memory size, software availability, etc. Using the concept of incremental costs, a method to evaluate software packages is developed. By this method the optimal system can be determined.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2138-2145
• /
• 2017

A hybrid system combining renewable technologies with diesel generators is a promising solution for rural electrification. Myanmar has many renewable energy resources, and many regions that cannot be supplied with electricity from the main grid. Therefore, in this study, we select a village in Myanmar, which is located far away from the substation, and evaluate the economic feasibility of a hybrid system for the village considering the specific local conditions and resource availability. We consider a hybrid system composed of a photovoltaic source, diesel generator, battery energy storage system, and converter. The load profiles of the household data from the village, and the solar radiation profiles are determined. The advantages of the hybrid system, in terms of cost, reliability, and environmental effects are analyzed through simulations using commercial software. The simulation results show that, for the selected village in Myanmar, a hybrid system with battery energy storage can reduce the cost and greenhouse gas emissions while maintaining reliability. We also obtain an optimized design in terms of the component size for the selected hybrid system with battery energy storage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.72-77
• /
• 2014

The cross-section area of cable in the Offshore Wind Farm (OWF) is smaller than that in the onshore wind farm. Because the power loss in OWF is large relatively, the power loss is a key element for the economic evaluation of OWF design. The availability of wind turbine in OWF and the size of OWF are larger than those of onshore wind farm. If the economic evaluation of OWF ignores the availability of wind turbines, the power loss cost of OWF is overpriced. Since there are so many wind turbines, also, the calculation of power loss should be more accurate. In this paper, a method to calculate power loss is proposed for the design of big and complex inner-grid in OWF. The 99.5MW OWF is used for case study to see what effect the proposed method have on the power loss cost.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.97-103
• /
• 2019

If the new town development project begins with inappropriate location then it will be difficult to recruit tenants and the proportion of the infrastructure cost could increase. It is necessary to evaluate the feasibility of the new town development projects to solve this problem. This study aims to identify the current status of the new town development projects and draw up evaluation criteria by examining advanced researches. To identify the importance of each village, we set up the weights through analytic hierarchy process. The evaluation criteria were classified into location conditions and economical efficiency. In the case of location conditions, it was classified into available size, geographical conditions, and accessibility. As a result of analyzing the questionnaire, it was subdivided into officially assessed land prices in case of economic efficiency. This study had some limitations, that is we focused on the location conditions and economic feasibility among other factors. Therefore further study should contain analysis more on socio-cultural aspects such as residents' cooperation or will for this project. By adding results later, we can make more reasonable decisions when we choose appropriate area.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.151-159
• /
• 1999

This research was carried out to evaluate the possible usage of natural clay materials collected from the Kimpo landfill site and nearby clay mines as a clay liner material. In order to evaluate the possible usage as a clay liner material, specific gravity, pH, loss-on-ignition, organic carbon content and mineralogical composition of clay materials were measured. The Atterberg limit test and the size analysis were performed for the engineering classification and the prediction of hydraulic conductivity of clay materials. Caution exchange capacity and batch tests were also carried out for the assessment of attenuation capacity. Clay specimens of KPNCL, KP-1, KP-2 and SH were recommended as suitable clay linder materials from viewpoint of their basic quality and attenuation capacity.

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2023

Mulberry (Morus spp.) production is a vital activity in sericulture along with rearing of silkworms (Bombyx mori L.) for silk production. The Sericulture Research and Development Institute (SRDI) conducted a study that evaluated 11 mulberry varieties, including nine newly-evolved mulberry hybrids and two check varieties. These mulberry varieties were fed to silkworm hybrid, DMMMSU 115 x 100. The rearing performance of DMMMSU 115 x 100 was determined based on the silkworm economic traits such as weight of 10 matured larvae, cocoon weight, shell weight, shell percentage, cocoon yield, reelability percentage, filament length and filament size. Six silkworm rearing trials were conducted with 50 silkworm larvae per treatment in three replicates. The data were analyzed in a one-way Analysis of Variance. Significant differences were tested further using Tukey's Honest Significant Difference. Mulberry varieties that garnered an evaluation index value of higher than 50 were identified and selected. Results of the study revealed significant variations among the mulberry varieties based on the parameters gathered except on the reelability of cocoons, filament length and size. Matured silkworm larvae fed with Alf 55 were significantly heavier and higher cocoon yield compared to those fed with Alfonso and S₅₄. Alf 32, Alf 55, Alf 58, Bat 37 and Bat 73 were identified as potential varieties and highly recommended as feed for the silkworm hybrid, DMMMSU 115 x DMMMSU 100.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.588-591
• /
• 2009

Ground source heat pump system; GSHPs is close to most practical use for early stage investment cost and energy efficiency in new renewable energies, and currently considered utilizing to the heat and cooling system of a building. Particularly, the case to utilize 'Standing Column well heat source gathering method' in the open standards process to have the excellent capability of gathering geothermal source is increased. But the research for the optimal design technology and the assessment of a pollution level of the ground to utilize a single well for gathering geothermal is insignificant and the design is insufficient. The heating and cooling system and the equipment to utilize a large size residential development to have over 1000 households have not developed yet. Therefore, our company developed 'geothermal hybrid system' which can construct the heat and cooling system using geothermal energy for a large size residential development of over 1000 households and conducted the evaluation of economic feasibility. Moreover we developed automatic equipment for gathering geothermal source and PLC (Programmable logic controller) to have optimal efficiency and FCU (fan coil unit) considering the floors of large size apartments.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.9
• /
• pp.507-512
• /
• 2004

HTS (High Temperature Superconducting) Transformer has the several useful characteristics in the viewpoints of technical and economical. Especially, an HTS transformer replaces the copper wire coils in a conventional transformer with lower loss HTS wire. In addition, inexpensive, environmentally benign liquid nitrogen replaces the conventional oil as the electrical insulation (dielectric) and provides the necessary cooling for the HTS transformer Therefore, the Life-cycle cost of an HTS transformer is much more attractive than conventional because it is more energy efficient, lighter in weight, smaller in size, and environmentally compliant. HTS transformer can be the best way to replace with conventional transformer in the future. In these days, companies world-wide have conducted researches on HTS transformer. A development project for a 154kV HTS transformer is proceeding at a research center and university in Korea. In this paper, we investigate the expected price of HTS transformer to have a merit in viewpoint of economic aspect. First, life-cycle cost of conventional transformer is calculated and based on this, the expected price of HTS transformer is evaluated. which HTS transformer is competitive against conventional transformer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.211-216
• /
• 2014

Construction of power plants and T&D facilities is so difficult because of the civil complaints and the additional cost according to the concerning field conditions. Therefore, various researches and methods have been considered to get solutions in the demand side and energy storage systems have been in the spotlight because of the various functions such as peak shaving, load shifting, and power system stabilizing, and so on. Residential small size batteries are considered in this paper and the economic analysis is carried out to evaluate the reasonable subsidy levels for the deployment of energy storage systems. Various economic parties are considered to find reasonable subsidy level comparing each other, which parties consist of utilities, participants and non-participants in general. The evaluation is based on California Standard Practice Test and the results are able to be used as subsidy guidelines.