• Title/Summary/Keyword: economic plant

Search Result 1,150, Processing Time 0.028 seconds

Estimation of Embodied Technological Progress in Korean Manufacturing (한국 제조업 사업체의 체화 기술진보율 추정)

  • LEE, Siwook
    • KDI Journal of Economic Policy
    • /
    • v.34 no.1
    • /
    • pp.53-85
    • /
    • 2012
  • This paper empirically investigates the rates of embodied technological change and their relative contributions to total factor productivity growth for manufacturing, using the Korean plant-level manufacturing data for the period of 1985-2003. We adopt a production-based estimation method proposed by Sakellaris and Wilson (2004) in order to examine the marginal productivity increase of each vintage of equipment over time. We find that the rate of embodied technological progress of Korea's manufacturing sector maintains the annual average level of 13.7 percent from 1985 to 2003, slightly lower than 16.9 percent of the U.S., estimated by Sakellaris & Wilson (2004). While the rate recorded a remarkable increase after the 1997 financial crisis, IT-producing and IT-using industries achieved higher rates of embodied technological progress than non-IT counterparts.

  • PDF

A Comparative Analysis of Life Cycle Cost on the Window Glass and the Insulation Film Coated Glass for Window (창호 유리의 단열필름 시공에 따른 생애주기비용 비교 분석)

  • Jeong, Mingu;Kim, Gwang-Hee
    • Journal of the Korea Institute of Building Construction
    • /
    • v.14 no.6
    • /
    • pp.583-590
    • /
    • 2014
  • The purpose of this study is to analyze and compare the life cycle cost of window glass with insulation film and regular glass, to verify an economical window construction method. As an approach method, the thermal performance data of each type of glass was measured using Window 6.3 and ECO2-OD Simulation Program, applied it to the case building to calculate the air conditioning and heating maintenance costs and LCC, and compared the economic feasibility. As a result, installing an additional insulation film prevents the solar heat penetration in the summer, so it reduces the cooling cost, on the other hand, it increased heating cost in winter. From the life cycle cost perspective, the effect of cooling cost reduction does not counterbalance the increase in heating cost and the additional cost from film installation and repair; therefore, the installation of insulation film may not be a proper method.

Trade Liberalization, Growth, and Bi-polarization in Korean Manufacturing: Evidence from Microdata (우리나라 제조업에서 무역자유화가 성장 및 양극화에 미치는 영향: 미시자료를 통한 실증적 증거들)

  • Hahn, Chin Hee
    • KDI Journal of Economic Policy
    • /
    • v.35 no.4
    • /
    • pp.1-29
    • /
    • 2013
  • This paper examines the effect of trade liberalization or globalization, more broadly, on plants' growth as well as on "bi-polarization". To do so, we reviewed the possible theoretical mechanisms put forward by recent heterogeneous firm trade theories, and provided available micro-evidence from existing empirical studies on Korean manufacturing sector. Above all, the empirical evidence provided in this paper strongly suggests that globalization promoted growth of Korean manufacturing plants. Specifically, evidence suggests that exporting not only increases within-plant productivity but also promotes introduction of new products and dropping of old products. However, the empirical evidence also suggest that globalization has some downsides: widening productivity differences across plants and rising wage inequality between skilled and unskilled workers. Specifically, trade liberalization widens the initial productivity differences among plants through learning from export market participation as well as through interactions between exporting and R&D, both of which increase plants' productivity. We also show that there is only a small group of large and productive "superstar" plants engaged in both R&D and exporting activity, which can fully utilize the potential benefits from globalization. Finally, we also show evidence that trade liberalization interacts with innovation to increase the skilled-unskilled wage inequality.

  • PDF

Evaluation and Application of Dynamic Soil Properties for SSI Analysis (지반-구조물 상호작용해석시 동적지반특성의 평가 및 적용)

  • Lee, Myung Jae;Shin, Jong Ho;Chon, Chun Su
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.10 no.2
    • /
    • pp.103-112
    • /
    • 1990
  • This study examines the characteristics of soil behavior which includes many uncertainties in seismic design, evaluates the dynamic soil properties and studies the soil-structure interaction to generalize the applicability and economy of the available sites. An example analysis is performed for soil-structure system response assuming a containment structure built on site which includes soil layers using both elastic halfspace analysis and FEM analysis against the seismic loads from the actual design. This exercise is performed as a part of the safety analysis and economic assessment of the nuclear power plant built on soils. It includes the preparation of computer program capable of incorporating large nonlinearity in the analysis, resonable evaluation procedures to determine input soil data. Nonlinear FEM analysis of Seed and Idriss model is found suitable for the accurate analysis of dynamic response of soils. Linear FEM analysis using dynamic soil properties at strain level obtained by one-dimensional seismic response, and elastic half-space analysis using dynamic soil properties at strain level under static loads are recommended to evaluate the dynamic soil properties.

  • PDF

Energy Storage System Model for Facility Plan Connected with Solar and Wind Power Plant (태양광/풍력 연계 기반의 에너지저장장치 설비계획 모델링)

  • Lee, Yong-Bong;Kim, Jeong-Ho
    • Journal of IKEEE
    • /
    • v.19 no.3
    • /
    • pp.295-303
    • /
    • 2015
  • Considering to Energy Storage System (ESS) is a global trend In order to reduce global warming and carbon emissions. South Korea has announced various policies to vitalize the development and uptake of renewable energy. South Korea is planning the cumulative capacity of ESS of two million kW in 2020. According to the government support and development of technology companies, the battery of ESS prices are expected to fall gradually. In this paper, we develop a planning model that take into account the supply expansion of technology of ESS and prices. Based on planning model, we analyze the cost of ESS linked with wind power and the revenue for trading electricity and renewable energy certifications.

Optimal Design of Cogeneration System for General Facilities Considering LCC Analysis (LCC 분석을 고려한 일반 시설물에서 소형열병합발전의 최적 설계)

  • Kang, Yul-Ho;Ku, Bon-Cheol;Hwang, Yu-Jin;Song, Jae-Do;Cheong, Seong-Ir;Lee, Jae-Keun
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.21 no.8
    • /
    • pp.439-447
    • /
    • 2009
  • Cogeneration system produces power as well as heat recovered from waste heat during power generation process. This system has higher energy efficiency than that of the power plant. In this study the optimal design for the cogeneration system with the increase of the capacity considering life cycle cost(LCC) analysis has been performed in the general facilities such as hotels and hospitals under the assumption of electricity cost of 95 won/kWh, the initial cost of cogeneration system of 1,500,000 won!kW and the value of 0.5${\sim}$1.0 in the ratio of heat to power. The optimal ratio of cogeneration capacity divided by average electricity load of facility was found out more than 0.5 in case of electricity cost with the increase of>30%, and the percentage of $CO_2$ reduction was about 9%. The most important factors in the economic analysis of cogeneration system was found out the electrity cost and the initial cost of cogeneration system. Also the ratio of heat to power at the value of>0.5 was not affected in the economy of cogeneration system, but was very important in the $CO_2$ reduction.

Effect of Bed Soil with Polypropylene Spunbonded Fabrics on Rice Seedling Production

  • Lee, Sang-Chul;Lee, Ji-Ean;Shon, Tae-Kwon;Jeong, Ki-Po;Daniel Acquah;Kim, Sang-Kuk
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.48 no.2
    • /
    • pp.89-95
    • /
    • 2003
  • The study of this experiment is focused on labor saving of healthy rice seedling production using PSF (polypropylene spunbonded fabrics) as thermal protection material. Several factors such as different compositions of nursery soil and PSF materials were tested to produce healthy rice seedlings. The inner thermal protection material in PE film (polyethylene film) showed $0.9-1.7^{\circ}C$ higher than that of PSF 40-100 $\textrm{gm}^{-2}$. The light transmittance-ratio also showed similar trends. It is considered that the appropriate PSF material density was 40 gm$\textrm{gm}^{-2}$ in accordance with economic values and healthy rice seedlings. Plant height and dry weight according to various nursery soil showed the rang-es of 8.5-14.2cm and 5.5-10.0mg, respectively. In composition of nursery soil, artificial soil combined with paddy soil was effective in producing healthy seedling for rice seedling production. The total sugar content also showed the difference between PSF 40, 60 $\textrm{gm}^{-2}$ PE film (0.43-0.52mg FW $\textrm{g}^{-1}$) and PSF 80, 100 $\textrm{gm}^{-2}$ (0.28-0.35mg FW $\textrm{g}^{-1}$) and it showed the same tendency among varieties as well as various nursery soil. These results demonstrate that PSF 40 $\textrm{gm}^{-2}$ economically affordable, and can be recommended as thermal protection material for producing good healthy rice seedling.

Comparison of Allowable Axial Stress Provisions of Cylindrical Liquid Storage Tanks under Seismic Excitation (지진 하중을 받는 원통형 플랜트 탱크 구조물의 축방향 허용압축응력 설계기준 비교 연구)

  • Oh, Chang Kook;Lee, So Ri;Park, Jang Ho;Bae, Doobyong
    • Journal of Korean Society of Steel Construction
    • /
    • v.28 no.4
    • /
    • pp.293-301
    • /
    • 2016
  • Stability of cylindrical liquid storage tanks under seismic excitation could prevent catastrophic disaster of human life and economic loss. Domestic provisions on allowable compressive stress in tank walls to prohibit buckling failure are either incomplete or inconsistent, so foreign specifications such as API 650, BS EN 1998-4:2006 or New Zealand Standards are employed in stability design. In this study, response spectrum analyses are performed for plant tanks having different ratios of height to diameter or diameter to thickness to calculate hydrodynamic pressure on tank walls. Then nonlinear buckling analyses are conducted to estimate magnitude of buckling stress. By comparing analysis results with those from foreign design specifications, appropriate domestic design provisions are suggested.

Farmers Preference and Perception towards Cropland Agroforestry in Bangladesh

  • Chakraborty, M.;Haider, M.Z.;Rahaman, M.M.
    • Journal of Forest and Environmental Science
    • /
    • v.31 no.4
    • /
    • pp.241-254
    • /
    • 2015
  • This study attempts to examine farmers' preference and perception towards cropland agroforestry (CAF) and its economic benefits in Bangladesh. It surveys 84 farmers of two sub-districts named Manirampur and Bagherpara under Jessore district of Bangladesh to address the study objectives with the help of a questionnaire during the period of June to July 2013. We follow a multistage random sampling procedure for selecting respondents of the survey. A total of 27 plant species under 19 families are identified in the surveyed crop fields, among which 11 are tree species and 1 is shrub from 8 families and 15 species are agricultural crops from 11 families. According to the survey findings, most of the farmers prefer multipurpose tree species like Swietenia macrophylla (67 percent), Phoenix sylvestris (48 percent), Mangifera indica (48 percent) and Cocos nucifera (43 percent). We also find that Curcuma longa (92 percent), Oryza spp. (56 percent), Solanum melongena (43 percent) and Amorphophallus campanulatus (33 percent) are the available agriculture crops which are grown in association with trees in the study area. The surveyed farmers report that they practice CAF to get fuel wood, fodder, juice, fruit and food for family consumption and revenue earnings. About 76 percent of the surveyed farmers endorse the existence of a positive interaction between trees and agriculture crops, while the rest 24 percent endorse the existence of a negative interaction between trees and agriculture crops. This study finds that CAF farmers on an average earn US$ 1,410 per farm per year and the yearly average revenue difference between CAF and non-cropland agroforestry (NCAF) farmers is US$ 214. Overall, CAF needs to develop through scientific intervention in the study area to conserve the biodiversity and to enhance farmers' sustainable livelihood.

A Stress Analysis for Pressure Vessel to Prevent Spontaneous Ignition of Coal Stockpile (저탄장 자연발화 방지를 위한 압력용기의 응력 해석)

  • Kim, Young In;Kim, Seung Hun;Jie, Min-Seok;Yeum, Chan Sub;Choi, Won Hyuck
    • Journal of Advanced Navigation Technology
    • /
    • v.22 no.3
    • /
    • pp.205-212
    • /
    • 2018
  • Spontaneous ignition is not only severe economic damage but also a typical plant damage caused by harmful gases generated during the fire. Because coal is porous, it causes oxygen to be absorbed in the amount of oxygen per unit weight of oxygen, resulting in low humidity and low thermal conductivity. The cause and effect of spontaneous ignition are very complex, so it is difficult to prevent it beforehand and once it is difficult to digest it, it is difficult to digest it. This study examines structural safety by conducting a structural analysis of the cooling ball system to prevent spontaneous combustion of coal stockpile plants and external pressures.