• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.612-620
• /
• 2016

Aqueous mineral carbonation process, in which $CO_2$ is captured through the reaction with aqueous calcium oxide (CaO) solution, is one of CCU technology enabling the stable sequestration of $CO_2$ as well as economic value creation from its products. In order to enhance the carbon capture efficiency, it is required to maximize the dissolution rate of solid reactants, CaO. For this purpose, the proper design of a reactor, which can achieve the uniform distribution of solid reactants throughout the whole reactor, is essential. In this paper, the effect of internal reactor designs on the solid dispersion quality is studied by using CFD (computational fluid dynamics) techniques for the pilot-scale reactor which can handle 40 ton of $CO_2$ per day. Various combination cases consisting of different internal design variables, such as types, numbers, diameters, clearances and speed of impellers and length and width of baffles are analyzed for the stirred tank reactor with a fixed tank geometry. By conducting sensitivity analysis, we could distinguish critical variables and their impacts on solid distribution. At the same time, the reactor design which can produce solid distribution profile with a standard deviation value of 0.001 is proposed.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.243-247
• /
• 2016

Growth traits, such as body weight, directly influence productivity and economic efficiency in the swine industry. In this study, we estimate heritability for body weight traits usinginformation from pedigree and genome-wide single nucleotide polymorphism (SNP) chip data. Four body weight phenotypes were measured in 1,105 $F_2$ progeny from an intercross between Landrace and Jeju native black pigs. All experimental animals were subjected to genotypic analysis using PorcineSNP60K BeadChip platform, and 39,992 autosomal SNP markers filtered by quality control criteria were used to construct genomic relationship matrix for heritability estimation. Restricted maximum likelihood estimates of heritability were obtained using both genomic- and pedigree- relationship matrix in a linear mixed model. The heritability estimates using SNP information were smaller (0.36-0.55) than those which were estimated using pedigree information (0.62-0.97). To investigate effect of common environment, such as maternal effect, on heritability estimation, we included maternal effect as an additional random effect term in the linear mixed model analysis. We detected substantial proportions of phenotypic variance components were explained by maternal effect. And the heritability estimates using both pedigree and SNP information were decreased. Therefore, heritability estimates must be interpreted cautiously when there are obvious common environmental variance components.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.111-118
• /
• 2009

This study is to analyze the performance of SWH(Solar Water Heating) and GSHP(Ground Source Heat Pump) systems by evaluating their energy efficiency and LCC(Life Cycle Cost) as being applied to the OO hall as a selected building in the Army. The OO hall, used as bathrooms, dining rooms, accommodations and offices, has reinforced concrete structure system with three floors above the ground and one underground, and its total floor area is approximately 2,917$m^2$. Two energy simulations are conducted to predict the yearly cooling and heating energy of the selected building: One is for analysis of an air-conditioning energy consumption using the e-Quest program, and another is for two new-renewable energy facilities as a water heating source using the RETScreen. The installed capacity of two new-renewable energy facilities is determined according to the 5% level of total standard construction cost. As a briefly result, SWH system is more energy-effective than GSHP system. Considering the break-even point, it is expected that SWH can take only 3 years 11 months to pay for itself in savings while the investment of GSHP can be recovered in more than 16 years 6 months.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.211-225
• /
• 2013

To run an optimal operation of Integrated energy supply facilities, we need to analyze heat consumption patterns of District heating users and derive optimum and maximum load ratio of heat production facilities unit. This study selects three District heat production facilities. It also classifies District heating users into residential apartment buildings and eight non-residential buildings and analyzes heat consumption results for an year. Finally it carries out the analysis of how the ratio change of each type affects maximum load ratio, facility utilization ratio, heat supply range. According to this study, three different District heat facilities of residential apartment building show similar daily and annual heat consumption patterns. Annual average load ratio, maximum load ratio and annual heat demand increase as outdoor temperatures decrease. Non-residential buildings in urban District focused on apartment buildings display similar by the daily and annual heat consumption patterns. Yet their daily and annual maximum load ratio differ according to outdoor temperature, District, building types and their composition ratio. In the case of urban District focused on apartment buildings reach optimum and maximum load ratio when apartment buildings reaches 60-70% of the total. At that point heat supply range becomes maximized and the most economic efficiency is obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.88-94
• /
• 2018

This study examined the safety of a cable stayed bridge caused by damage to the cable system. Many cable-supported bridges, including cable-stayed bridges and suspension bridges, have been constructed on the Korean peninsula. This requires efficient maintenance and management because this structure has complex structural components and systems. This large structure also often faces risks either from manmade causes or natural phenomena. In 2015, the cables on one cable-stayed bridge in South Korea was struck by lightning, which led to a fire on the cables. These cables were damaged, which put the bridge at risk. This bridge was back in use after a few weeks of investigations and replacements of the cables but this was done at enormous social and economic expense. After this event, risk-based management for infrastructure is required by public demand. Therefore, this study examined the risks on the cable system due to potential damage. In this paper, a one cable-stayed bridge in South Korea was selected and its safety was investigated based on the damage scenarios of cable system for efficient and prompt management, and to support decision making. FEM analysis was conducted to evaluate the safety of the bridges after damage to the cable system.

• Environmental and Resource Economics Review
• /
• v.16 no.1
• /
• pp.99-127
• /
• 2007

When the margin between available capacity and demand is thin in a liberalized electricity market, prices rise steeply and system reliability is threatened. The principal response to these circumstances is often an assumption that price spikes and electricity shortages are the result of a failure to build sufficient new supplying facilities. It is, of course, often the case that additional investments in generation and network facilities would improve reliability, and such investments are often needed. But focusing on additional generation and transmission facilities for restoring balance to the grid overlooks the essential fact that reliability is a function of the relationship between supply and demand, imposing unnecessary costs on electric system. When the relationship is out of balance, the search for solutions must consider not only investments supply-side resources but also cost-effective demand-side resources such as accelerated load management, efficiency measures, and price-responsive load programs. Integrating demand resources into electricity markets can add enormous value to the electric system, widening the capacity margin, lowering costs and enhancing system reliability at the same time. This paper studies several challenges now facing electricity markets: demand-side management-especially, economic effects of demand response, potential reliability problems, market and system operation, CBP market improvements and so on. The paper concludes with a series of policy recommendations in five areas: (i) The Effects of efficient improvement to incorporate demand responses and demand-side resources into modem electricity markets, (ii) Fosteing price based demand response and (iii) improving incentive based demand response, (iv) strengthen demand response analysis and valuation, (v) integrating demand response into resource planning and adopting enabling technologies.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.8
• /
• pp.33-44
• /
• 2019

Purpose - As the scope of existing digital transformation expanded to various degrees, the Fourth Industrial Revolution came into being. In 2016, Klaus Schwab, Chairman of the World Economic Forum (WEF), said that the new technologies that lead the fourth industrial revolution are AI, Block chain, IoT, Big Data, Augmented Reality, and Virtual Reality. This technology is expected to be a full-fledged fusion of digital, biological and physical boundaries. Everything in the world is connected to the online network, and the trend of 'block chain' technology is getting attention because it is a core technology for realizing a super connective society. If the block chain is commercialized at the World Knowledge Forum (WKF), it will be a platform that can be applied to the entire industry. The block chain is rapidly evolving around the financial sector, and the impact of block chains on logistics, medical services, and public services has increased beyond the financial sector. Research design, data, and methodology - Figure analysis of data and social science analytical software of IBM SPSS AMOS 23.0 and IBM Statistics 23.0 were used for all the data researched. Data were collected from hotel employees in China from 25th March to 10th May. Results - The purpose of this study is to investigate the effect of the block chain characteristics of the existing hotel reservation system on the intention to use and to examine the influence of the block chain characteristics of the hotel reservation system on the intention to use, We rearranged the variables having the same or similar meaning and analyzed the effect of these factors on the intention to use the block chain characteristic of the hotel reservation system. 339 questionnaires were used for analysis. Conclusions - There are only sample hotel workers in this study, and their ages are in their 20s and 30s. In future studies, samples should be constructed in various layers and studied. In this study, the block chain characteristics are set as five variables as security, reliability, economical efficiency, availability, and diversity. Among them, Security and reliability made positive effects on the perceived usefulness. Also, security and economics did on the perceived ease. Availability and diversity did on both perceived usefulness and perceived ease. Perceived ease did on perceived usefulness. And perceived ease and perceived usefulness did on user intent. But security and economics did not on the perceived usefulness

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.124-134
• /
• 2018

Despite the many advantages of modular housing, low preference for modular housing for consumers who are familiar with RC structure leads to high construction cost of modular housing. The cost of modular buildings is about 130% of that of RC structures, so it is urgent to secure economical efficiency of modular buildings. Therefore, in this study, after calculating the savings amount of modular housing by type of construction work, economic analysis was conducted from a long - term perspective. In order to carry out the research, the authors compiled and analyzed the material cost, labor cost, and expenses incurred by each type of work by reclassifying the statement of the modular housing into the factory production and the site installation. After that, Pareto diagrams were created to find a core work that is included in the cost ratio of about 80%, and selected it as a cost reduction subject. Based on the assumption that the market size of domestic modular housing is similar to the level of modular advanced countries such as Japan and European countries, six cost reduction methods were set up that reflects the characteristics of the modular construction method and used for the expert interviews. Cost saving potentials in percentage from the interview were converted to the amount of savings that can be achieved by each type of method when applying the method. Finally, the findings of the study are expected to suggest long-term directions for technical development for modular construction and cost savings.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.197-203
• /
• 2017

This study purpose is propose the basic data for selecting the optimal target material by analyzing the photon characteristics of various materials which was located in the head of medical linear accelerator. In this study, energy spectrum of 6, 15 MV photon beams were compared and analyzed for 13 target materials using MCNPX of Monte Carlo method. The mean energy for the 6 MV energy spectrum was 1.69 ~ 1.84 MeV and that for the 15 MV was 3.38 ~ 3.56 MeV, according to the target material. The flux for the 6 MV energy spectrum was $1.64{\times}10^{-5}{\sim}1.80{\times}10^{-5}{\sharp}/cm^2/e$ and that for the 15 MV was $1.76{\times}10^{-4}{\sim}1.85{\times}10^{-4}{\sharp}/cm^2/e$. The analysis shows that the average energy and flux increase with higher atomic number of the target material. Based on this study, it is possible to present the basic data about the physical characteristics of the photon, and it will be possible to select the target later considering economic, efficiency and physical aspect.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.793-804
• /
• 2006

Various PSC and steel-concrete composite railway bridges are being developed for short-medium spans with structural and economic efficiency. According to the design concept, the prestressed composite girder bridge has the advantages of being lightweight and having low girder depth, with the capacity for long spans. However, the dynamic behavior under a passing train is one of the critical issues concerning these railway bridges designed with more flexibility. Therefore, it is very important to evaluate the modal parameters before performing dynamic analyses. In this paper, real-scale prestressed composite girders were fabricated as a test model and modal testing was carried out to evaluate modal parameters including natural frequency and modal damping ratio. During the modal testing, a digitally controlled vibration exciter as well as an impact hammer was applied to obtain frequency-response functions, and the modal parameters were also evaluated after the fracture of test models. With application of reliable properties from modal tests, the estimation of dynamic performances of prestressed composite girder railway bridges can be obtained from various parametric studies on dynamic behavior under the passage of a moving train.