• The Research Journal of the Costume Culture
• /
• v.19 no.2
• /
• pp.245-254
• /
• 2011

The purpose of this study was to develop uniform pattern of obese junior-high school girls by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, by using 3D virtual garment simulation, new uniform pattern considered obese junior-high school girls was development. The basic numerical formula were as follows; bust girth=B/2+2.5, armhole depth=B/4, front waist girth=W/4+1.8, back waist girth=W/4+1, front hip girth=H/4+1, back hip girth=H/4+1, chest width=chest width+1.5, back width=back width+1 and back neck width 8cm. Second, according to the results of the new uniform pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new uniform pattern is appropriate for the obese junior-high school girls. Also, new uniform pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• Health Policy and Management
• /
• v.27 no.2
• /
• pp.139-148
• /
• 2017

Background: The purpose of this study is to investigate family caregivers' opinions about out-of-pocket payment for long-term care (LTC) facilities, and find the differences in the opinions for family caregivers of all different levels of income. Methods: We used the data of the study on out-of-pocket payment in national long-term care insurance, including 1,552 family caregivers with the elderly in long-term care facilities. Results: The average out-of-pocket payment per month was 511,635 Korean won and distributed from 230,750 to 1,365,570 Korean won. The amount of out-of-pocket payment might be affected by not co-payment but the cost of non-covered service. There were differences in them for family caregivers of all different levels of income. Opinions were surveyed about 5 issues. By levels of income, there were differences in their opinions about 3 issues, the financial burden on LTC, the necessity of reducing out-of-pocket payments, and to be willing to pay more for a high quality service. But there were not different opinions about the interruption of LTC service and staying with LTC facilities. Conclusion: These findings suggest that the range of out-of-pocket payment for LTC facility is wide and it can be a burden to lower income group. It should be to prepare the policies to ease the financial burden and support the appropriate LTC use.

• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.81-98
• /
• 2017

The purpose of this study is to provide basic information for the development of pants patterns with a high level of fit and comfort through calculating surface variations of lower body parts by movement, grouping them into factors, and analyzing how their surface variations link to one another. The achieved results will help determine essential elements for constructing pants patterns, such as key measurements of lower body parts, the amount of ease values and selection of fabrics, which should be taken into consideration for allowing better movement in clothing. The study required lower body 3D scanning of women for analysis, and 13 women between the ages of 20-24 participated in the scanning, which was done by using Artec Eva 3D scanner. Their scanned data were digitalized and converted to measure the values of their lower body surface length and girth in pre-determined positions such as walking, stair climbing and sitting on a chair. These measurements have been statistically analyzed through SPSS 21.0 to obtain the average amounts and rates of extension for each of the measurement item. Some of the highlighted study results are as follows: The surface length and girth measurements were grouped into 4 factors based on their average extension rates. The results from correlation analysis between measurement items within each factor demonstrated that common items linked to all the changes in the values of other items in the three movements. But in most cases, items were not always correlated with each other for different movements. The results also showed that there were correlations between girth measurements, length measurements, and girth and length measurements. Therefore, key measurements for daily pants should be determined within reasonable estimations between relevant measurement items, while the measurements for work pants, which often withstand certain postures or repetitive movements, may require measurement items that are appro priate for, and closely related to, certain movements or tasks.

• The Korean Journal of Community Living Science
• /
• v.25 no.2
• /
• pp.233-246
• /
• 2014

This study investigates the level of satisfaction with quality attributes of meal services for low-income children in Wonju, Korea. Based on interviews with 287 subjects (users of meal boxes: 17.4%, card users: 82.6%; boys: 48.4%, girls: 51.6%; elementary school students: 44.4%, middle school students: 33.0%, high school students: 22.6%; two parents household: 29.8%, single- or no- parent household: 70.2%) through consent from their guardians, some key characteristics of the subjects and the relationships between their characteristics and the level of their satisfaction with meal services were examined. According to the results, the level of satisfaction ranged from 54.7% to 66.0% (those respondents indicating "very good" and "good") indicated that the meals were generally acceptable. The highest level of satisfaction was for sanitation (66.0%), followed by taste (64.0%), ease of choosing preferred menu items (61.9%), a proper temperature (61.9%), a sufficient amount (60.8%), diversity (56.3%), the comfortableness of the dining area (54.7%), and sufficient nutrition (41.0%). For these eight quality aspects of meal services, users of meal boxes were more likely to be satisfied with the comfortableness of the dining area, whereas card users, with the taste and temperature of the food. The type of meal service, the attitudes toward talking to friends about supporting meals, and subjectively perceived health status had significant effects on the level of satisfaction with meal services.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.55-61
• /
• 2016

As the price-performance ratio of embedded PCs improves, the benefits of the PC-Fi can be maximized by designing an embedded PC-Fi system. In this paper presents the design of an embedded PC-Fi that can be manipulated by a remote controller based on mobile devices such as smart phones or tablets. Additionally, an interactive control system and its GUI, through which the user can select and play music as they like at ease, are presented. The case that a large amount of music is stored in the PC-Fi system requires a function allowing the user to easily select the music they want to listen to. In order to implement this function, a DB containing detailed information of each track can be used to find the location of the desired music with keywords provided by the user. In this proposed system, the embedded PC-Fi system and remote controller are mutually connected via a WiFi network, and more than one user can remotely control the embedded system with their own mobile device.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.25.1-25.1
• /
• 2011

Over the past few decades, metallic nanoparticles (NPs) have been of great interest due to their unique mesoscopic properties which distinguish them from those of bulk metals; such as lowered melting points, greater versatility that allows for more ease of processability, and tunable optical and mechanical properties. Due to these unique properties, potential opportunities are seen for applications that incorporate nanomaterials into optical and electronic devices. Specifically, the development of metallic NPs has gained significant interest within the electronics field and technological community as a whole. In this study, gold (Au) pads for surface finish in electronic package were developed by inkjet printing of Au NPs. The microstructures of inkjet-printed Au film were investigated by various thermal treatment conditions. The film showed the grain growth as well as bonding between NPs. The film became denser with pore elimination when NPs were sintered under gas flows of $N_2$-bubbled through formic acid ($FA/N_2$) and $N_2$, which resulted in improvement of electrical conductance. The resistivity of film was 4.79 ${\mu}{\Omega}$-cm, about twice of bulk value. From organic anlayses of FTIR, Raman spectroscopy, and TGA, the amount of organic residue in the film was 0.43% which meant considerable removal of the solvent or organic capping molecules. The solder ball shear test was adopted for solderability and shear strength value was 820 gf (1 gf=9.81 mN) on average. This shear strength is good enough to substitute the inkjet-printed Au nanoparticulate film for electroplating in electronic package.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.169-184
• /
• 2016

Smartphone use is rapidly spreading due to the advantage of being able to connect to the Internet anytime, anywhere--and mobile app development is developing accordingly. The characteristic of the mobile app market is the ability to launch one's app into foreign markets with ease as long as the platform is the same. However, a large amount of prior research asserts that consumers behave differently depending on their culture and, from this perspective, various studies comparing the differences between consumer behaviors in different countries exist. Accordingly, this research, which uses online product reviews (OPRs) in order to analyze the cultural differences in consumer behavior comparatively by nationality, proposes to compare the U.S. and South Korea by selecting ten apps which were released in both countries in order to perform a sentimental analysis on the basis of star ratings and, based on those ratings, to interpret the sentiments in reviews. This research was carried out to determine whether, on the basis of ratings analysis, analysis of review contents for sentiment differences, analysis of LDA topic modeling, and co-occurrence analysis, actual differences in online reviews in South Korea and the U.S. exist due to cultural differences. The results confirm that the sentiments of reviews for both countries appear to be more negative than those of star ratings. Furthermore, while no great differences in high-raking review topics between the U.S. and South Korea were revealed through topic modeling and co-occurrence analyses, numerous differences in sentiment appeared-confirming that Koreans evaluated the mobile apps' specialized functions, while Americans evaluated the mobile apps in their entirety. This research reveals that differences in sentiments regarding mobile app reviews due to cultural differences between Koreans and Americans can be seen through sentiment analysis and topic modeling, and, through co-occurrence analysis, that they were able to examine trends in review-writing for each country.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.655-665
• /
• 2010

This study analyzed the effects of skinny jean on women's health by questionnaire survey and measuring the pressure experienced under the clothing and participants' subjective view of the pressure level. The average size women in their 20s' waists is 26 inches and so three pairs of jeans were prepared and worn by 4 female participants. A survey was conducted to investigate how often participants wear skinny jeans and whether they had had any feelings of discomfort as a result of this. Participants responded that they hadexperienced middle to high levels of discomfort due to the high pressure inside skinny jeans. For the maximum value of clothing pressures, jean f2 at the part of buttocks showed $48.7gf/cm^2$. The pressure inside the clothing was found to be highest around the buttocks followed by the knees and finally the belly. The mean values of 7 measuring parts are different according to the jean type; f3 $20.8gf/cm^2$ > f2 $16.4gf/cm^2$ > f1 $15.5gf/cm^2$, which is corresponding to the order of pressure sensation, but not corresponding to the order of ease amount of clothing pattern: f2 > f3 > f1. Mean pressure values were also measured according to the body posture: they were found to by highest when sitting on a chair (21.3gf/$cm^2$), second highest when sitting on the floor ($19.2gf/cm^2$) and lowest when standing ($15.0gf/cm^2$). This is not always same to the order of participants subjective perceptions of the pressure, which is, they estimated pressure to be highest when sitting on the floor followed by sitting on a chair and lowest in a standing position.

• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.700-711
• /
• 2001

The purpose of this study was to investigate the differences in the method of patternmaking, difficult in draft of patternmaking, fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve under the controled situation. Five types of two piece sleeve that were originated from five countries including domestic companies which called A type, B type, C type, D type, and E type were used. In order to conduct the experiment fur the study, 10 persons who were well organized about the patternmaking drafted 5 types of sleeve and were tested for the differences in the method of patternmaking, difficulty in draft of patternmaking. Another panel were tested for fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve in jacket under the controled situation. The results of this study were as followed 1. C type was needed height of armhole in bodice and D type was needed height of armhole and width of armhole in bodice as well as all parts of sleeve measurements to draft patternmaking. 2. There were significant differences of the items such as cap height, ease amount around sleeve cap, width of sleeve, forwardness of sleeve and the length of elbow line of the five types patternmaking drafted. 3. There were significant differences of difficulty in draft of the five types of patternmaking. C type and E type were easier to draft. 4. There were significant differences in fitness of the sleeves in jacket. C type and E type were more fit. 5. There were significant differences in aesthetic view. A type, B type and E type were more aesthetic under the situation. 6. There were significant differences in fashionableness in jackets. A type and E type were more fashionable under the situation.