• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.67-74
• /
• 2000

The usage of nondestructive testing on early-aged concrete leads to enhacned safty and allows effective scheduling of construction, thus making it possible to maximize the time and cost efficiencies. In this study, a reliable nondestructive strength evaluation method for early-aged concrete using the longitudinal wave velocity is proposed. Compression tests were performed to examine factors influencing the velocity-strength relationship of concrete, such as water-cement (w/c) ratio, fine aggregate ratio, curing temperature, and curing condition. The test results show that a change in the w/c ratio and curing temperature has minor effect on the velocity-strength relationship/ However, curing condition significantly influences the velocity-strength relationship of early-aged concrete. Moreover, the longitudinal wave velocity increases with decreasing fine aggregate ratio. It is concluded from this study that the strength evaluation of early-age concrete can be achieved by a nonlinear equation which considers the effects of curing condition and fine aggregate ratio.

• 한국결정성장학회지
• /
• 제24권1호
• /
• pp.27-32
• /
• 2014

본 연구에서는 매스콘크리트의 수화열 저감 및 초기강도 향상을 목적으로 3성분계 배합에 따른 콘크리트의 기초적 특성을 분석하였는데 결과를 요약하면 다음과 같다. 굳지 않은 콘크리트의 물성은 목표범위를 모두 만족하는 것으로 나타났다. 응결시간은 W/B와 관계없이 저열 시멘트 배합이 가장 빠른 것으로 나타났고, 간이 수화열은 저열 배합의 피크 온도가 가장 높은 것으로 나타났고, 저발열-B 배합이 가장 낮은 온도를 나타내었으며, 조강형 저발열 배합은 저발열-B와 유사한 것으로 나타났다. 경화 콘크리트의 압축강도는 초기재령에서 저발열-B 배합을 제외한 모든 배합이 유사한 강도 범위를 나타내었고, 장기 재령에서는 큰 차이 없이 유사한 강도 범위를 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.64-69
• /
• 1999

Slags are by-products of the metallurgical industry. The most important slag from the standpoint of the quantity used as building material is iron blastfurnace slag. Slags are either crystalline stable solid used as aggregates or glassy material used as hydraulic binder. Slag cements are low heat of hydration cements. Slags react more slowly with than portland cement but they can be activated chemically. Activatiors can be either alkaline activators such as soda, lime, sodium carbonate, sodium silicate or sulphate activators such as calcium sulphate or phosphogypsum. So, in this study slaked lime was used as an activator that the compressive strength of this modified cement(M1 type) is high range in early age. And initial setting time of M1 type cement was shorter than conventional cements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.93-95
• /
• 2011

This study is to investigate experimentally the engineering characteristics of cement mortar incorporating both recycled aggregate powder (RP) below 0.08 mm and cement kiln dust(CKD). RP is substituted for fine aggregate ranged from 5~15% and CKD is also substituted for RP from 10~30%. The use of RP resulted in a decrease in flow value at fresh mortar, while an increase in CKD did not affect the flow value significantly. The combination of RP and CKD provided slight increase in compressive strength at early and 28 days and in the high curing temperature at early age showed an increasing Strength value.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.269-272
• /
• 2003

This study is intended to investigate the properties of concrete using AE Water Reducing Agent of Early-Strength Type. According to the results, as for the replacing method of mineral admixture, setting time is shortened faster in order of replacement for fine aggregate, combination and replacement for cement, and when AE Water Reducing Agent of Early-Strength Type is used, it is shortened by about 4 hours, compared with normal AE Water Reducing Agent Compressive strength is lower in the case of replacement for fine aggregate, but higher in the other case than that of plain concrete. And When AE Water Reducing Agent of Early-Strength Type is used, early compressive strength is very high in comparison to normal AE Water Reducing Agent. Early strength development is very favorable by the use of AE Water Reducing Agent of Early-Strength Type regardless of the replacing method of mineral admixture at $20^{\circ}C$, but at $l0^{\circ}C$, it is effective for Early strength development that W/B is lowered to below 45%, BS of 20% is replaced for fine aggregate, and AE Water Reducing Agent of Early-Strength Type is used.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.90-97
• /
• 2009

본 연구에서는 고로슬래그 미분말(이하 BS)사용 모르타르의 초기강도가 저하하는 문제점을 해결하고자 BS 20%치환 시멘트 모르타르에 자극제로 석고(이하 CS)와 고분말도의 미분시멘트(이하 FC)를 치환 사용한 경우의 기초적 물성을 검토한 것으로, 그 결과를 요약하면 다음과 같다. 먼저, 굳지않은 모르타르의 특성으로 유동성은 BS 치환율이 증가할수록 감소하였고, BS 20%에 CS를 치환한 경우는 치환율에 관계없이 큰 영향을 미치지 않은 것으로 나타났으며, FC를 치환한 경우는 치환율이 증가할수록 감소하는 것으로 나타났다. 압축강도는 BS 치환율이 증가할수록 초기재령에서 강도가 저하하는 것으로 나타났고, 재령 28일에서는 잠재수경성 반응에 기인하여 약간 증가하는 것으로 나타났다. BS 20 % 치환 모르타르의 초기 압축 및 휨 강도향상에 대하여 CS를 치환한 경우는 치환율이 증가함에 따라 초기재령에서 미소하게 증가하는 것으로 나타났고, FC를 치환한 경우는 치환율이 증가할수록 초기 및 28일 재령에서 강도가 크게 증가하는 것으로 나타났다. 종합적으로 BS 20% 치환 모르타르의 초기 강도 저하 문제의 해결로서 CS의 치환은 효과가 적고, FC 25%를 치환하여 사용하게 되면 OPC만을 사용한 Plain과 유사한 것으로 나타나 양호한 품질의 향상을 기대할 수 있을 것으로 분석된다.

• 환경위생공학
• /
• 제16권1호
• /
• pp.53-60
• /
• 2001

In this study, the heavy metals in tannery sludge were solidified by using cement and power plant fly ash. Solidification characteristics were discussed with the compressive strength and chromium leaching characteristics of solids. The compressive strength of cement mortar was increased by the amount of fly ash up to 24.3~33.8%, which was considered the results of pozzolanic reaction. When the content of fly ash was 20%, cement mortar showed the highest value $295kg/\textrm{cm}^2$ for 28 days curing. At early curing days, solidified chromium tannery sludge solids were showed lower compressive strength because of the retard on the hydration of cement, but the compressive strength was recovered to be more than $140kg/\textrm{cm}^2$ for 28 days curing regardless with the amounts of fly ash. Also, the results of leaching tests by KSM and TCLP method were showed that the solidified chromium sludge have leached out 0.3~2.2% and 11~17%, respectively.

• 한국건축시공학회지
• /
• 제21권4호
• /
• pp.269-279
• /
• 2021

Palm Oil Fuel Ash(POFA)는 콘크리트의 물리적 특성 및 내구성을 향상시키기 위해 일정량 시멘트를 치환하여 사용된다. 그러나 높은 강열감량과 각진 입자 형상으로 인해 POFA를 사용한 콘크리트의 워커빌리티가 감소한다. 본 연구에서는 micro-POFA를 혼입한 시멘트 페이스트의 초기 물리적, 수화 특성에 감수제 종류 및 사용량이 미치는 영향을 mini-slump 실험, 초기 압축 강도, TGA, XRD, SEM을 이용하여 검토하였다. micro-POFA 치환율이 증가함에 따라 시멘트 페이스트의 유동성은 감소하였으며, 감수제의 사용량이 증가할수록 시멘트 페이스트의 유동성은 증가하였다. 또한, 감수제의 사용은 시멘트 페이스트의 초기 압축 강도를 저하시켰으며, 사용량이 증가할수록 압축 강도 저하가 뚜렷하게 나타났다. 미세분석을 통해 감수제가 C-S-H 형성을 억제하고 상대적으로 Ca(OH)₂의 생성량을 증가시켰기 때문이라고 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.221-222
• /
• 2012

This study is to high early concrete development which reveals 14 MPa within 12 hours in order to reduce the mold time of dismantlement and not do the steam curing of the precast concrete product. About (40~50) min could shorten the final setting time if the coagulation test result cement amount 100 kg/m3 was increased. In the case of the compressive strength, it was exposed to be satisfied the target value with the cement amount 500 kg/m3 combination according to the hardening accelerator addition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.254-255
• /
• 2014

This study is a part of development to improve early-age compressive strength of concrete by using industrial by-products. It tried to investigate the characteristics of early-age compressive strength according to curing temperature and industrial by-product replacement ratio 10, 20, and 30 %. As a result, regardless of industrial by-product replacement ratio and age, early-age compressive strength of concrete was found to be high compared to Plain using 100 % cement.