• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.203-204
• /
• 2016

In this research, it used cement power and reduction slag, which generates high hydration heat in hydration reation without heat cure below -5℃ degree. Purpose of final research is preventing freezing and thawing by making the compressive strength 5MPa in 3days below zero temperature due to own heat of concrete. and it is the result of physical characteristic and thermal property evaluation of reduction slag. Because reduction sag generates high hydration heat, compressive strength development is excellent. By generating highly Hydration heat by C₁₂A₇ and C₃A in reduction slag, compressive strength is developed in low temperature. In case of displacing only reduction slag without SO₃, it is indicated that quick-setting occurs by shortage of SO₃. For preventing quick-setting, gypsum is used essentially. According to this research result, in case of using reduction slag and gypsum as a ternary system, Compressive strength developed 5MPa in 3days below zero temperature. It is identified to prevent early frost damage of concrete below zero temperature.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.51-53
• /
• 2012

This paper is to report the results of mock-up test for concrete during severe cold weather. The temperature is fixed at -20℃. The mock-up specimens were fabricated simulating slab, wall and column. Heating coil with different heat capacity with 5 W and 15 W were embedded at slab specimen. Test results revealed that at -20℃, temperature dropped below 0℃ since around 70 hours. It takes 7 days to gain 45°D·D of maturity for avoiding frost damage at early age.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.382-391
• /
• 2002

본 연구에서 초기재령 콘크리트의 크리프 특성을 고려한 단면 내 온도 및 수축응력을 구하는 3차원 유한요소 해석 프로그램을 개발하기 위한 수치해석 절차에 관하여 정립하였다. 최근 들어 구조물의 노후화에 따른 콘크리트의 내구성에 대한 관심이 고조되고 있고, 초기재령에서 발생하는 균열은 구조물의 내구성 및 사용성과 같은 장기적인 성능에 큰 영향을 미친다. 많은 토목 기술자들이 초기재령 콘크리트의 체적변화에 의한 응력 및 균열 문제를 심도 깊게 다루지 않는 데는 장기적인 내구성과 사용성에 대한 인식이 부족하고, 경화가 진행되는 콘크리트의 체적변화는 매우 복잡한 영향인자를 고려해야 되기 때문이다. 또한 초기재령 콘크리트의 체적변화로 인한 응력을 예측하는 기존 프로그램들은 주로 수화열에 의한 온도 및 열응력 해석에 국한되거나, 수화과정과 연계되지 않은 습도분포에 의한 수축 응력해석을 대상으로 한다. 따라서 본 연구에서는 초기재령 콘크리트의 체적 변화에 의한 모든 응력 요소를 하나의 통합적인 해석 시스템으로 구성하여, 초기재령 콘크리트의 균열 제어 수단으로 활용하고자 한다. 본 연구는 초기재령 콘크리트의 온도 및 수분에 관련된 재료 물성 뿐 만 아니라 역학적 특성 등 모든 재료 물성을 수화도에 기초하여 모델링하였다. 또한 콘크리트가 강성을 가지는 시점부터의 초기재령 크리프 실험을 수행하고, 그 결과로부터 수화도에 따른 크리프 거동을 모델링하여 해석 프로그램에 반영하였다. 개발된 해석프로그램을 이용하여 수치해석 결과와 실험결과를 비교하여 그 타당성을 검증하고, 해석 예제를 통하여 각 변형률 성분에 의한 잔류 응력의 변화 양상을 비교, 분석하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.68-77
• /
• 2020

본 논문은 전기로 산화 슬래그를 굵은 골재로 적용하여 제작된 콘크리트에 대하여 초기 재령 시기에 동결 피해를 받았을 때 발생하는 성능 저하에 대한 콘크리트의 역학적 특성과 공극 구조를 평가하고자 하였다. 본 연구에 따르면, 전기로 산화 슬래그 골재를 혼입한 콘크리트의 초기동결 피해가 발생할 경우, 100~150 ㎛ 영역에 존재하던 공극의 피크점이 큰 영역으로 이동하며, 24시간을 초과하지 않도록 해야 200 ㎛ 미만의 공극이 유지되고 500 ㎛ 이상의 공극이 증가하지 않으므로 동결 저항성 개선이 가능한 것으로 판단된다. 또한, 전기로 산화 슬래그와 BFS를 함께 사용하면, 천연골재를 사용한 경우에 비해 상대 압축강도가 증가하였다. 한편, 탄성계수 및 공명진동수의 경우, 압축강도와 비교하여 초기동결로 인해 크게 변화하지 않으므로, 초기동결 피해에 관한 성능 저하를 평가하기 위해서는 각 실험 요소간의 상호관계를 분석해야 할 필요가 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.527-532
• /
• 2003

When fresh concrete is exposed to sufficiently low temperature, the free water in the concrete is cooled below its freezing point and transforms into ice, which causes decrease in compressive strength of concrete. Of the many influencing factors on the loss of compressive strength, the age of concrete at the beginning of freezing, water-cement ratio, and cement-type are significantly important. The objective of this study is to examine how the these factors affect the compressive strength of concrete frozen at early ages. The results from the tests showed that as age at the beginning of freezing is delayed and water-cement ratio is low, the loss of compressive strength decreases. In addition, concrete made with high-early-strength cement is less susceptible to frost damage than concrete made with ordinary portland cement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.23-25
• /
• 2013

In this study, the results are compared with the case of the concrete with embedded heating wire to verify the performance of the IB made in order to improve the workability and affordability, and to determine the effectiveness of early frost damage prevention. The IB was made using the 5W heating wire and layed on the upper surface of the concrete. The temperature was reduced to below 0℃ approximately within 24 hours, then approached the external temperature thereafter. On the other hand, when the 20W heating wire was used to make the IB and applied the same way, the temperature remained around -2 to 3℃ on the average even through the temperature was reduced to below 0℃, due to the heating wire with relatively large heating capacity. It appeared to reach 85% of the direct heating by embedding the heating wire relatively deeper in the concrete. However, it was determined that using the IB made with the 20W heating wire will prevent the early frost damage to some degree in -10℃.

• Advances in concrete construction
• /
• 제11권4호
• /
• pp.335-345
• /
• 2021

It is known from the literature that there are relatively few studies on the engineering properties of ultra-high performance concrete (UHPC) in early age. In fact, in order to ensure the safety of UHPC during construction and sufficient durability and long-term performance, it is necessary to explore the early behavior of UHPC. The test parameters (test control factors) investigated included the percentage of cement replaced by silica fume (SF), the percentage of cement replaced by ultra-fine silica powder (SFP), the amount of steel fiber (volume percent), and the amount of polypropylene fiber (volume percentage). The engineering properties of UHPC in the fresh mixing stage and at the age of 7 days were investigated. These properties include freshly mixed properties (slump, slump flow, and unit weight) and hardened mechanical properties (compressive strength, elastic modulus, flexural strength, and splitting tensile strength). Moreover, the effects of the experimental factors on the performance of the tested UHPC were evaluated by range analysis and variance analysis. The experiment results showed that the compressive strength of the C8 mix at the age of 7 days was highest of 111.5 MPa, and the compressive strength of the C1 mix at the age of 28 days was the highest of 128.1 MPa. In addition, the 28-day compressive strength in each experimental group increased by 13%-34% compared to the 7-day compressive strength. In terms of hardened mechanical properties, the performance of each experimental group was superior to that of the control group (without fiber and without additional binder materials), with considerable improvement, and the experimental group did not produce explosive or brittle damage after the test. Further, the flexural test process found that all test specimens exhibited deflection-hardening behavior, resulting in continued to increase carrying capacity after the first crack.

• 한국건축시공학회지
• /
• 제13권6호
• /
• pp.513-521
• /
• 2013

This study aimed to examine whether heat curing methods of concrete subjected to $-10^{\circ}C$ could be effective by varying the combination of heating cable and surface heat insulations. Three different concrete specimens incorporating 30% fly ash with 50% W/B were fabricated to simulate wall, column and slab members with dimensions of $1600{\times}800{\times}200$ mm for slab, $800{\times}600{\times}200$ mm for wall and $800{\times}800{\times}800$ mm for column. For heat curing combinations, Type-1 specimens applied PE film for slab, plywood for wall and column curing. Type-2 specimens applied double layer bubble sheet (2LB) and heating coil for slab, and 50 mm styrofoam for wall and column curing. Type-3 specimen applied 2LB for slab, electrical heating mat for wall and column inside heating enclosure. The test results revealed that the temperature of Type 1 specimen dropped below $0^{\circ}C$ beginning at 48 hours after placement due to its poor heat insulating capability. Type 2 and 3 specimens maintained a temperature of around $5{\sim}10^{\circ}C$ after placement due to favorable heat insulating and thermal resistance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.334-336
• /
• 2013

In this study, the temperature history was evaluated for the improved bubble sheets combining hot wires and PE films, which were developed under the extreme environmental condition of -10℃ and applied on the top surface of slab to prevent initial damage by freezing. Results can be summarized as follows. If improved bubble sheets combining hot wires with different capacity on double and quadruple bubble sheets are used, the temperature history for all materials decreased to 2~3℃ below zero but all test materials except Type 1 secured the accumulative temperature of 45° D·D at 7 days of material age, required for the prevention of initial freezing damage. This indicates the bubble sheets can prevent the initial damage by freezing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.687-690
• /
• 2005

Recently, to consider financial and constructive aspect, usage of Admixture, like Blast- Furnace Slag and Fly-Ash, are increased. These mineral admixtures, a by-product of steel industry, have many advantage, to reduce the heat of hydration, increase in ultimate strength, improve workability and etc. But it also reduces early-age strength, so it is prevented from using of Blast-Furnace Slag at cold-weather-concrete. In this study, for the purpose of increasing usage of mineral admixtures, like Blast-Furnace Slag and Fly ash, it is investigated the strength properties of concrete subjected to under low temperature According to this study, if early curing is carried out before having frost damage, the strength of concrete, subjected to frost damage, is recovered. And to consider increasing effect of strength, it is more effective to use of mineral admixtures, especially to use blast furance slag.