• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.5
• /
• pp.384-389
• /
• 2002

No-tillage (NT) practice for corn production has advantages of reduction of soil erosion and energy conservation. Research on effects of NT for sweet corn or super sweet corn is very limited. Hybrids of sugary (su) and shrunken-2 (sh2) were tested under NT and conventional tillage (CT) practices to investigate plant characters, ear characters, fresh yield, and grain yield. Sugary hybrids were Golden Cross Bantam 70 (GCB70), Sprint, Geumdanok, and Danok3. Shrunken-2 hybrids were BSS9472, Cambella90, GSS9299, Jubilee, KS-Y-65, and Chodangok1. Emergence rates under NT were lower than those under CT for su, while there was no difference between tillage systems for sh2. There were no differences between CT and NT for days to tasseling and silking, plant height, and ear height for both su and sh2. Ear characters such as ear length, number of kernel rows, number of kernels per row, and t100-kernel weight under NT were not significantly different from those under CT. There were no differences between two tillage practice for fresh and grain yield, rather they showed trend of increases under NT practices. Results from this trial indicate that NT practice for both su and sh2 cultivation may be possible to recommend to farmers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.449-456
• /
• 2011

Eighteen different biometric traits in 407 Kankrej cows from their breeding zone, i.e. Palanpur district of Gujarat, India, were recorded and analyzed by factor analysis to explain body conformation. The averages of body length, height at withers, height at shoulder, height at knee, heart girth, paunch girth, face length, face width, horn length, horn diameter, distance between horns, ear length, ear width, neck length, neck diameter, tail length with switch, tail length without switch and distance between hip bones were $123.44{\pm}0.37$, $124.49{\pm}0.28$, $94.68{\pm}0.30$, $38.2{\pm}0.14$, $162.56{\pm}0.56$, $178.95{\pm}0.70$, $44.09{\pm}0.10$, $15.91{\pm}0.05$, $42.47{\pm}0.53$, $26.07{\pm}0.19$, $13.34{\pm}0.08$, $31.24{\pm}0.12$, $16.10{\pm}0.05$, $50.63{\pm}0.18$, $73.21{\pm}0.32$, $111.62{\pm}0.53$, $89.34{\pm}0.34$ and $17.28{\pm}0.10\;cm$, respectively. The correlation coefficients between different traits ranged from -0.806 (horn diameter and distance between horns) to 0.815 (heart girth and paunch girth). Most of the correlations were positive and significant. Factor analysis with promax rotation with power 3 revealed three factors which explained about 66.02% of the total variation. Factor 1 described the cow body and explained 38.89% of total variation. The second factor described the front view/face of the cow and explained 19.68% of total variation. The third factor described the back of the cow and explained 7.44% of total variation. It was necessary to include some more variables for factor 3 to obtain a reliable estimate of the back view of the cow. The lower communities shown for distance between horns, horn diameter, ear width and neck diameter indicated that these traits did not contribute effectively to explaining body conformation and can be dropped from recording, whereas all other traits are important and needed to explain body conformation in Kankrej cows. The result suggests that principal component analysis (PCA) could be used in breeding programs with a drastic reduction in the number of biometric traits to be recorded to explain body conformation.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.173-179
• /
• 2019

DICOM(Digital Imaging and Communications in Medicine) imaging plays a significant role in the diagnosis and treatment of the human body, and design modeling is a technology of planning shapes in three dimensions according to the purpose. In this study, we converge these two technologies to observe the relationships of the cross-section, volume, and surface area to the morphological changes of the external ear canal. The experiment applied medical imaging technologies to acquire sections of the human body to create and divide centerlines using 3D shapes extracted from 19 external ear canals by applying stereolithography and 3-matic program. The results showed that the cross-sectional structure of the external ear canal had various shapes, such as oval (38.5%), semicircular (28.2%), mixed (17.9%), square (10.2%), and wrinkled (5.1%). In addition, the cross-sectional area of each phase increased as the length of the external ear canal increased, and the volume and surface area decreased towards the direction of the eardrum. However, the surface area reduction rate was relatively low. This indicates that the structure becomes irregular towards the direction of the eardrum.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.933-944
• /
• 2004

This study was aimed to provide the fundamental and various measurement data of the head and face for male children. Two hundred forty one male children, aged nine to twelve years, participated for this study. The 31 regions on the head and face of the subjects were directly measured by the expert experimenters. Through factor analysis, the six factors were extracted upon factor scores and those factors comprised $67.47\%$ for the total variances. The first factor was described the general height elements for the mouth and the environs of the mouth. The second factor was described the general height around the nose, forehead and eyes. The third factor was described the height of the ear environs. The forth factor contained the length around the sinciput to the occiput, the head thick and the head circumstance. The fifth factor was described the general width of the outer head and the corner of the eyes. The last factor contained the depth of the mouth and nose. Four clusters as their head and face shape were categorized using six factor scores by cluster analysis. Type 1 was characterized by the shortest head and face width, surface length and girth, and the shorter length of head, but the highest position of chin, philtrum, upper lip. Type 2 was characterized by the shortest head and face length and thickness, and the lowest position of the forehead, eye, nose, mouth, ear environs, but that had wider width of head and face. Type 3 was characterized by the longest and the widest head and face type, and the highest position of the mouth. Type 4 was characterized by longer length of head and face, and the widest head girth and largest head thickness, and the highest position of the forehead, eye, nose environs. And this type had the widest width of nose and mouth, and the longest head surface length.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.75-84
• /
• 1995

This study was designed as a reference of vertical dimension in prosthetic treatment. The author analyzed six facial measurements, namely, (1) the height of lower face at maximum intercuspal position, (2) the height of lower face at resting position, (3) midface, (4) external ear and lateral wall of orbit, (5) interpupillary distance, (6) distance between pupil and mouth in the 100 Won-kwang Univ. Dental collage students(50 : male, 50 : female), who have normal occlusion, no posterior prosthesis, no experience of orthodontic treatment, and no deformity of facial soft tissue and no temporomandibular dysfunction. The results of this study were as follows : 1. The length of midface was shortest and the inter-pupillary distance was longest in both male and female. 2. The length difference with the length of midface and lower face at maximum intercuspal position was 5.64mm in male and 2.23mm in female, so the lower face was longer, 3. The facial measuring component, similar to lower face at maximum intercuspation, was the length of between medial wall of external ear and lateral wall of orbit. It's difference was 1.3mm in male, 1.77mm in female, and the lower face was shorter. 4. The difference of lower facial length in resting position and maximum intercuspation was 2.48mm in male, 2.24mm in female, the length of resting position was therefore longer. 5. The most clost correlation with the height of maximum intercuspal positioning lower face was resting lower face in both groups.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.1-16
• /
• 1986

This experiment was carried out to obtain genetic information for future corn breeding. The materials used for the study were obtained from the nationwide collection of Korean local corn lines. A total of 262 lines were used for the study of morphological characters and for the classification of lines. Results obtained are summarized as follows; 1. The days to flowering of lines ranged from 57 days to 87 days. Most lines had an average of 67 days of flowering days. 2. The number of tillers of lines showed a lot of variation among lines with 49.2% of coefficient of variation. 3. The coefficients of variation computed based on the phenotypic observation or measurement of each line were 36.1%, 27.2%, 20.0%, 16.4% and 16.3% for kernel weight per ear, 100 kernel weight, ear height, plant height and ear length, respectively. 4. Ear height, ear length, ear diameter, tiller number and days to flowering were highly and positively correlation with the plant height. Kernel size, ear size, and plant height were highly correlated with 100 kernel weight and kernel weight per ear. 5. The 262 corn lines were possibly classified into four major groups by the Euclidean distance. Group I comprised 110 lines, group II 74 lines, group III 66 lines and group IV 12 lines, respectively. Group I was characterized as having early maturity, medium plant height large kernel size and large ear size. Group II had medium maturity, short plant height, medium kernel size and small ear size. Group III had medium maturity, medium plant height, large kernel size and medium ear size. Group IV had late maturity, long plant height, small kernel size, small ear size and many tillering. 6. The plant height showed significant difference between group I and II, II and III, and II and IV group. No statistical differences were observed between group III and IV. The ear size of group I was significantly different from those of group II, III and IV. Also difference of ear size between group II and III was significant. The kernel size, 100 kernel weight and kernel weight per ear were all significantly different among all groups classified. The row number was different between group I and II. The row number of lines in group IV was significantly different with group I, II, III respectively. The number of tillers and flowering days of lines in group IV were greatly different from those of group I, II and III. 7. The corn lines collected from northwest plain regions and middle hilly regions in Korea had medium maturity, medium plant height, large ear and large kernels. The corn lines from middle eastern hilly regions had medium size of ear kernels. The corn lines from middle southern hilly regions had late maturity, small kernel size and many tillers. The corn lines from southwest plain areas had late maturity, long plant height and many tillers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.41-47
• /
• 1995

This study present a systematic and more economical anthropometric technique to acquire 3-D anthropometric data by the use of moire interferometry, image processing and computer vision techniques. An experiment was performed to measure in anthopometric variables (head and face), such as head length, head breath, length of ear to top of head, contained face areas, etc. We took fourty-five subjects with wide range of ages(18 years to 33 years old). The face area was calculated based on contour information. The results were then compared with plaster bandage methods. It turned out that the proposed method had 90.85% consistancy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.73-82
• /
• 2014

This study was conducted to investigate the ear and kernel characteristics of waxy corn during ripening by double cropping, and to understand the pattern of starch accumulation in endosperm of waxy corn kernels. Chalok4 and Ilmichal were sown at April 20 (first cropping) and July 20 (second cropping) in 2011~2012. The accumulated temperature from silking to harvesting was about $590{\sim}630^{\circ}C$. It takes 23~24 days when Chalok4 and Ilmichal were sown in April 20, but July 20 sowing takes 32~35 days. Ear length and kernel set length were significantly shorter in second cropping (p<0.05). Kernel length, kernel width, 100-kernel weight, and starch content of waxy corn were increased as ears matured (p<0.05). Growth temperature was getting decreased during the ripening stage of second cropping, the rate of ear and kernel development had slowed. Starch granules started to accumulate in the cells around the pericarp, then developed in the cells around the embryo. In the second cropping, starch granules in the kernel of waxy corn were less compact than the first cropping, harvesting time of waxy corns can be extended. These results will be helpful to farmers for double cropping of waxy corn cultivation and management.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.364-369
• /
• 1989

Leaf characteristics of main stem and tiller of IK type maize (IK/ /IRI/B68) were compared with those of Jinjoo Ok hybrid which are not usually tillered. A total of nine leaves from flag leaf to the third or the fourth leaf below ear-bearing node were sampled from each stem or tiller. There was no significant difference in mean leaf length between IK/ /IRI/B68 and Jinjoo Ok. But the mean leaf width of IK/ /IRI/ B68 was about 2 cm narrower than that of Jinjoo Ok. The mean leaf area of the IK/ /IRI/B68 was also smaller than that of Jinjoo Ok due to the narrower leaf width. There were not significant differences in mean leaf characteristics between main stem and tillers of IK/IRI/B68. The longest leaf was the leaf below the ear-bearing node and the widest leaf was the leaf just above the ear-bearing node. Mean length. width and area of leaf on main stem and tillers were similar. Coefficients of variation calculated for individual leaf indicated that the leaves near the ear-bearing node were more uniform than others. The leaf area measured was significantly greater than that estimated by formular, length x width x 0.75. New constant to estimate leaf area of tillering maize was derived as 0.8.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.599-602
• /
• 2009

A single cross hybrid, Heukjinjuchal, is a black color waxy corn (Zea mays L.) developed by the maize breeding team at NICS in 2008. Heukjinjuchal was produced by crossing two inbred lines, KBW24 as seed parent and KBW2 as pollen parent. Ear length and ear diameter of Heukjinjuchal was 16.0 cm and 4.4 cm, respectively. The ratio of kernel set length/ear length was 89%, similar with that of a check hybrid, Chalok1. It is resistant to Northern corn leaf blight disease and also lodging tolerant. Fresh ear yield of Heukjinjuchal comparable with those of a check hybrid, Chalok1 in regional yield trials for three years. Seed production of this hybrid is relatively easy because of well overlapping period of silking and pollen dispersal between the two parents. This cultivar would be well adaptable to the whole country.