• Journal of Radiation Protection and Research
• /
• 제34권4호
• /
• pp.155-164
• /
• 2009

In this paper, we used computerized glow curve deconvolution (CGCD) software with several models for the simulation of a TL glow curve which was used for analysis. By using the general approximation plus model, parameters values of the glow curve were analyzed and compared with the other models parameters (general approximation, mixed order kinetics, general order kinetics). The LiF:Mg,Cu,Si and the LiF:Mg,Cu,P material were used for the glow curve analysis. And we based on figure of merits (FOM) which was the goodness of the fitting that was monitored through the value between analysis model and TLD materials. The ideal value of FOM is 0 which represents a perfect fit. The main glow peak makes the most effect of radiation dose assessment of TLD materials. The main peak of the LiF:Mg,Cu,Si materials has a intensity rate 80.76% of the whole TL glow intensity, and that of LiF:Mg,Cu,P materials has a intensity rate 68.07% of the whole TL glow intensity. The activation energy of LiF:Mg,Cu,Si was analyzed as 2.39 eV by result of the general approximation plus(GAP) model. In the case of mixed order kinetics (MOK), the activation energy was analyzed as 2.29 eV. The activation energy was analyzed as 2.38 eV by the general order kinetics (GOK) model. In the case of LiF:Mg,Cu,P TLD, the activation energy was analyzed as 2.39 eV by result of the GAP model. In the case of MOK, the activation energy was analyzed as 2.55 eV. The activation energy was analyzed as 2.51 eV by the GOK model. The R value means different ratio of retrapping-recombination. The R value of LiF:Mg,Cu,Si TLD main peak analyzed as $1.12\times10^{-6}$ and $\alpha$ value analyzed as $1.0\times10^{-3}$. The R of LiF:Mg,Cu,P TLD analyzed as $7.91\times10^{-4}$, the $\alpha$ value means different ratio of initial thermally trapped electron density-initial trapped electron density (include thermally disconnected trap electrons density). The $\alpha$ value was analyzed as $9.17\times10^{-1}$ which was the difference from LiF:Mg,Cu,Si TLD. The deep trap electron density of LiF:Mg,Cu,Si was higher than the deep trap electron density of LiF:Mg,Cu,P.

• Journal of Yeungnam Medical Science
• /
• 제6권1호
• /
• pp.121-131
• /
• 1989

건강한 성인 83명을 무작위로 선정하여 실시한 신경전도속도 검사에서 다음과 같은 결과를 얻었다. 1) 상지의 정중신경에서는 운동신경의 TL이 3.0-4.2msec 이고, MNCV는 각각 52.1-70.3m/sec(W-E), 44.6-71.0m/sec(E-Ax), 56.6-70.8m/sec(W-E), 50.5-75.1m/sec(E-Ax)이며, CNAP의 진폭은 $6.5-46.1{\mu}V$였다. 2) 척골신경에서는 운동신경의 TL이 2.4-3.4msec이고, MNCV는 각각 54.6-72.8m/sec(W-E), 41.1-64.9m/sec(E-Ax)1987년 3월부터 동년 12월까지 영남대학교 의과대학 부속병원에서 시행된 개심술마취 40례를 대상으로 저체온 체외순환시 저체온상태의 동맥혈과 정맥혈을 동시에 각각 채혈하여 $37^{\circ}C$ 혈액가스분석기로 측정한 비보정치와 환자의 실제 저체온으로 보정한 보정치를 각각 얻어 이를 비교하여 보았던 바 보정치가 비보정치에 비하여 pH는 높았고 이산화탄소분압과 산소분압은 낮았으며 $HCO_{3^-}$, 염기과잉, 이산화탄소분압 및 산소포화도는 온도보정에 영향을 받지 않았다. 이상의 결과로 미루어 보아 저체온상태의 혈액가스분석시 pH와 이산화탄소분압에 대한 온도보정의 영향은 크며, 저온상태에서의 pH 중심점이동과 산염기가 환자상태에 미치는 영향을 고려한다면 환자실제 저체온으로의 온도보정은 필요치 않을 것 같으며 오히려 $37^{\circ}C$ 비보정치로 판독하여 환자상태를 판정하는 것이 임상적으로는 더 타당한 방법이라 사료된다.

• 유통과학연구
• /
• 제15권8호
• /
• pp.75-86
• /
• 2017

Purpose - The online-to-offline (O2O) business model has brought considerable changes to the traditional Chinese business model. The main difference between O2O and pure online consumption is that O2O offers a richer experience and word-of-mouth. it is easier to trigger online word-of-mouth. However, few scholars have been concerned about the impact of experiential value on customer satisfaction and online word-of-mouth (e-WOM) in the study of O2O. This study takes the O2O business model in China's catering industry as its research object and uses structural equation modelling to analyze the impact of online and offline experiential values on customer satisfaction and e-WOM. Research design, data, and methodology - According to previous researches, consumer experiential value is mainly divided into return on investment (economy and efficiency), service excellence, playfulness and aesthetics. According to the characteristics of O2O in China's catering industry, this study divides the online experience value into efficiency and economy (return on investment). The offline part is divided into return on investment (economy and efficiency), service excellence, playfulness and aesthetics. Using a web-based survey, we collected 303 valid samples. Structural equation modelling was used to create the research model. Results - The results show that efficiency (online) and service excellence (offline) have a significant effect on customer satisfaction. Economics (online) and playfulness (offline) have a positive impact on customers' e-WOM. In addition, the higher the customer satisfaction, the greater the positive impact on the spread by word of mouth. However, aesthetic(offline) and return on investment(offline) have no significant impact to customer satisfaction and e-WOM. Conclusions - The study findings show that the key to boost customer satisfaction in the catering industry is to improve product quality and service. Although traditional competitive strategies such as online discount have been questioned by many scholars about their decreasing effectiveness, they are indispensable means to attract online traffic and trigger e-WOM. The traditional enterprises can reconstruct traditional business processes through the O2O model to effectively improve customer satisfaction and word of mouth by improving the experiential value of economy and efficiency. Additionally, it can be used as the natural advantages of online communication to induce customers to engage in word of mouth and attract more potential customers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.313-315
• /
• 2009

In this thesis, A methodology of system implement for PID controller, PWM logic, HSC logic, Host Communication and external DAC interface are implemented into single FPGA chip is proposed. The implemented system is used to control the speed of DC servo motor. A DATA block transfers set point value(SV) and P, I, D gain parameters to the corresponding Blocks respectively by the Host Communication to Computer. A HSC block generates process value(PV) by a pulse and $90^{\circ}$ shifted pulse from the encoder A PID block makes error(E) signal from the set value and process value and output manufacture value(MV) through the PID controller. In PWM block using the MV from the PID block, drives H-bridge controlling the Motor. Also DAC interface controls the DAC to graph the digital signal such as SV, PV, E, MV in FPGA onto the Oscilloscope.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.470-475
• /
• 2014

In the past, transmission error(T.E.) has been identified as one of the main sources of gear whine noise, which cause serious passengers irritation at high frequency. In this study, to identify the correlation of the T.E. and gear whine noise, a T.E. measuring system was developed. By comparing the T.E. and gear whine noise level, T.E. target value which can represent the gear noise was proposed. The conclusions are followed: (I) It is possible to measure T.E. of the gear pairs (II) Similar trends are observed between T.E. and gear whine noise. (III) By observing the T.E. pattern, presence of sideband noise can be predicted. (IV) Proposed T.E. target value can be adopted to the gear manufacturing for gear noise quality management.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.23-23
• /
• 2010

Because of power consumption increase, global warming, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. In this paper, various models that short and long gap distance were used to analyze E field of each model. Calculation value was estimated of flashover position. As a result, short and long gap distance that vacuum interrupter inner between move electrode and fix electrode not coincided flashover position of each model. short gap distance estimated flashover position at electrode edge. but long gap distance model confirmed $E_{max}$ value at center shield. in this paper was compared electric field value. and estimated of flashover position from electric field calculation.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.51-58
• /
• 1985

Ion-implanted E-IGFET의 도핑 profile을 임의로 가정하여 threshold 전압을 구하였고. short-channoel에 적용할 때 correction factor K의 개념을 사용하였다. Threshold전압의 이론치는 실험치와 잘 일치하였고, 또한 I-V특성도 실험치와 잘 일치하였다. 아울러 이 program을 package화 하여 실용화시켰다.

• 한국IT서비스학회지
• /
• 제12권2호
• /
• pp.185-193
• /
• 2013

This paper analyzes the effects of i-PIN focusing on the positive value creation rather than the negative loss reduction from the viewpoint of internet company. Empirical tests are run to examine what determines the use of i-PIN and whether i-PIN users participate in e-commerce, communication, and SNS activity. Our findings are as follows. First, the reason for using i-PIN lies in the experience of privacy infringement rather than a high value on privacy protection. Second, i-PIN users tend to participate in the online activity such as e-commerce, communication, SNS. Third, the marginal effect of i-PIN adoption amounts to 2~9% of increase in the online activity. With the results, we expect that i-PIN adoption leads to sales increase and new customer acquisition as well as privacy leakage decrease and it provides logic to solve social underinvestment problem in privacy protection.

• Journal of Information Processing Systems
• /
• 제15권2호
• /
• pp.261-270
• /
• 2019

In order to protect secret digital documents against vulnerabilities while communicating, steganography algorithms are applied. It protects a digital file from unauthorized access by hiding the entire content. Pixel-value-difference being a method from spatial domain steganography utilizes the difference gap between neighbor pixels to fulfill the same. The proposed approach is a block-wise embedding process where blocks of variable size are chosen from the cover image, therefore, a stream of secret digital contents is hidden. Least significant bit (LSB) substitution method is applied as an adaptive mechanism and optimal pixel adjustment process (OPAP) is used to minimize the error rate. The proposed application succeeds to maintain good hiding capacity and better signal-to-noise ratio when compared against other existing methods. Any means of digital communication specially e-Governance applications could be highly benefited from this approach.

• Mycobiology
• /
• 제36권2호
• /
• pp.102-105
• /
• 2008

The acetylcholinesterase (AChE) inhibitor of Yarrowia lipolytica S-3 was maximally produced when it was incubated at $30^{\circ}C$ for 36 h in an optimal medium containing 1% yeast extract, 2% peptone and 2% glucose, with an initial pH 6.0. The final AChE inhibitory activity under these conditions was an $IC_{50}$ value of 64mg/ml. After partial purification of the AChE inhibitor by means of systematic solvent extraction, the final $IC_{50}$ value of the partially purified AChE inhibitor was 0.75 mg/ml. We prepared a test product by using the partially purified AChE inhibitor and then determined its stability for the development of a new antidementia commercial product. The test product was stable at room temperature for 15 weeks.