• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제30권4호
• /
• pp.515-530
• /
• 2016

시각장애를 극복하고 주어진 환경에서 찾을 수 있는 장점을 활용하여 학문적인 중요한 기여를 해온 수학자들의 사례에 대한 연구 결과가 최근에 소개되었다. 이 연구를 통해 한국에서 소아마비나 뇌성마비 등의 신체적 장애를 극복하고 수학자로 성장한 예는 확인할 수 있었으나 시각장애인이 수학을 전공하여 수학 교사나 교수 또는 수학과 관련된 전문직에 진출한 경우가 전무하다는 것을 확인할 수 있다. 따라서 연구자는 선진국과 달리 한국에서 시각장애인 학생들이 수학을 전공하여 전문직에 진출할 수 없었던 이유에 대하여 생각해 보고, 이런 상황을 극복하기 위하여 시각장애청소년들이 좀 더 직관적으로 수학에 접근할 수 있는 방안을 연구한다. 그리고 본 연구에서는 시각장애인 학생들이 수학을 만지고 느끼면서 수학에 대한 관심과 실제 학습 내용의 직관적 이해를 돕는 하나의 도구로 3D 프린팅을 활용한 촉각수학교재와 교사용지도서 개발(제작 보급)을 위한 모델을 제안 한다. 이는 시각장애청소년 특수교사 부모의 교재활용을 수학교육 측면에서 지원함으로써 시각장애청소년의 수학에 대한 학습력을 신장시키고, 수학에 대한 자신감을 향상시키며, 수학을 이미지화하여 상상하는 수학교육 환경을 도모 할 것으로 본다. 특히 수학적 재능을 갖는 시각장애청소년들이 앞으로 수학을 전공하여 수학 관련 전문직으로 진출하는 모델을 만드는데 도움이 될 것으로 여겨진다.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.48-55
• /
• 2007

The aim of this article is to review the general property of the famous traditional Korean paper, "rice straw paper"(Bast-Fiber mixed with straw pulp), and to compare the paper qualities varying with the composition ratio of straw pulp, in order to revive the traditional paper in modem Korea. The experiment was carried out by making first the two different mixture papers, i. e., one is the paper of 50% bast fiber mixed with 50% straw pulp, and the other is the paper of 75% bast fiber with 25% oats straw pulp, and finally the 100% bast fiber paper was made for the purpose of comparison. The qualitative properties of these three kinds of paper with the different mixing ratio of the straw pulp were evaluated, and the findings of the experiment can be summarized as follow: 1. As to the quality aspects of the paper strength like tensile strength, breaking length, elongation, and tear strength, the test proved the 100% bast fiber paper as best, and the 50% mixed paper as the next good one. 2. In aspect of the printing adaptability such as density, opacity, brightness, whiteness, lab colors, air permeability, and roughness, the 50% mixed paper proved to be the best, due to the short cells in the straw pulp. 3. As to the air permeability, the larger ratio of straw pulp was found to be the lesser, and 75% bast fiber with 25% straw pulp mixture paper and the 100% bast fiber one were found 1/5 degree efficient. 4. In terms of the water absorption degree, 100% bast fiber paper was the fastest, but in case of mixture paper, 50% mixed one was a little faster up to the point of 1cm, while the two kinds of mixed ones appear to be almost similar to each other beyond the point. 5. The straw pulp mixed paper, especially the 50% mixed one was evaluated as the highest by the calligraphers who had experienced using the papers in terms of movement and feeling of the caligraphy and painting. In addition, although the 25% mixed paper is judged to be good for book printing because of the strength, the 50% mixed paper can be thought to be more desirable for painting and calligraphy. In conclusion, we will be able to make the quality paper with durability, by mixing the straw pulp with the bast fiber in proper ratio, following the tradition of Korean paper making.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 2000

Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.6.1-6.15
• /
• 2023

Background: Polycyclic aromatic hydrocarbons (PAHs) are occupational and environmental pollutants generated by the incomplete combustion of organic matter. Exposure to PAHs can occur in various occupations. In this study, we compared PAH exposure levels among occupations based on 4 urinary PAH metabolites in a Korean adult population. Methods: The evaluation of occupational exposure to PAHs was conducted using Second Korean National Environmental Health Survey data. The occupational groups were classified based on skill types. Four urinary PAH metabolites were used to evaluate PAH exposure: 1-hydroxypyrene (1-OHP), 2-naphthol (2-NAP), 1-hydroxyphenanthrene (1-OHPHE), and 2-hydroxyfluorene (2-OHFLU). The fraction exceeding the third quartile of urinary concentration for each PAH metabolite was assessed for each occupational group. Adjusted odds ratios (ORs) for exceeding the third quartile of urinary PAH metabolite concentration were calculated for each occupational group compared to the "business, administrative, clerical, financial, and insurance" group using multiple logistic regression analyses. Results: The "guard and security" (OR: 2.949; 95% confidence interval [CI]: 1.300-6.691), "driving and transportation" (OR: 2.487; 95% CI: 1.418-4.364), "construction and mining" (OR: 2.683; 95% CI: 1.547-4.655), and "agriculture, forestry, and fisheries" (OR: 1.973; 95% CI: 1.220-3.191) groups had significantly higher ORs for 1-OHP compared to the reference group. No group showed significantly higher ORs than the reference group for 2-NAP. The groups with significantly higher ORs for 1-OHPHE than the reference group were "cooking and food service" (OR: 2.073; 95% CI: 1.208-3.556), "driving and transportation" (OR: 1.724; 95% CI: 1.059-2.808), and "printing, wood, and craft manufacturing" (OR: 2.255; 95% CI: 1.022-4.974). The OR for 2-OHFLU was significantly higher in the "printing, wood, and craft manufacturing" group (OR: 3.109; 95% CI: 1.335-7.241) than in the reference group. Conclusions: The types and levels of PAH exposure differed among occupational groups in a Korean adult population.

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.13-19
• /
• 2018

본 연구에서는 태양광 접속함 모듈 적용을 위한 유연 솔더(Sn-Pb) 및 무연 솔더(Sn-3.0Ag-0.5Cu 및 Sn-1.0Ag-0.7Cu-1.6Bi-0.2In)의 특성을 비교 평가하였다. 접속함 내에는 전압 및 전류 검출용 모듈, 고내압용 다이오드가 실장된 정류모듈 등 다양한 모듈이 내장되어있다. 본 연구에서는 솔더링특성, 인쇄성, 솔더형상 검사, X-ray를 이용한 솔더 내 void 검사 및 접합강도를 측정하였고, 무연 솔더 합금의 공정최적화는 step 1과 step 2로 구분하여 검토를 실시하였다. Step 1은 유연 솔더와 무연 솔더 페이스트 인쇄 검사 시험을 1차와 2차로 나누어 실험을 진행하였고 printability는 void 함량 및 접합강도의 상관관계로 검토하였다. 전체적으로 유연 솔더의 특성은 무연 솔더에 비하여 상대적으로 우수하였다. Step 2는 리플로우 공정의 최고점 온도 변화에 따른 접합부 특성 변화를 관찰하였다. 리플로우 최고 온도가 증가할수록 접합부 내의 void 함량이 2~4% 정도 감소하였고, 접합강도는 약 0.5 kgf 범위내에서 큰 차이 없이 나타났다. 기판 표면처리종류에 있어서는 ENIG 표면처리가 OSP 및 Pb-free 솔더 표면처리보다 우수한 접합강도를 나타내었다. 1종류의 무연솔더와 OSP 표면처리로 접합된 태양광 접속함 모듈의 500 싸이클 열충격 신뢰성시험 전후에 전기적 특성변화는 0.3% 내의 범위에서 안정적으로 작동함을 확인하였다.

• 경영정보학연구
• /
• 제7권1호
• /
• pp.97-113
• /
• 2005

본 논문은 B2C 온라인 인터넷 쇼핑을 돕기 위한 비교쇼핑 에이전트를 설계하고 이를 구현하는데 목적을 두고 있다. 오프라인 상점에서 상품을 구매할 때 구매자가 판매원에게 제품의 제조사, 모델, 기능 또는 가격대를 설명하면 판매원이 해당 상품들을 보여주거나 카탈로그를 보여준다. 구매자는 상품의 기능이나 디자인을 비교하면서 적절한 상품군을 정한 후 가격을 비교한 다음에 가장 싼 곳에서 상품을 구입한다. 본 논문이 소개할 비교쇼핑 에이전트 ${\ulcorner}$PriceMeter${\lrcorner}$는 이러한 구매 행동에 최대한 부합 되도록 설계하였다. 구매자가 원하는 제조사, 가격, 기능 등을 선택한 후 검색하면 해당되는 상품들의 설명과 가격 정보들을 이 비교쇼핑 에이전트가 취합하여 보여준다. 마음에 드는 상품들을 카탈로그 양식으로 비교해서 볼 수도 있고, 프린트 양식으로 출력할 수도 있다. 특정 상품을 클릭하면 해당 상품을 판매하는 쇼핑몰들의 정보와 판매 가격을 함께 보여주며, 구매 아이콘을 클릭하면 쇼핑몰의 해당 상품 페이지로 이동할 수 있도록 하고 있다. B2C 전자상거래에 있어 비교쇼핑 에이전트의 구현과 확산은 구매자에게 더 많은 정보와 권한을 제공함으로써 소비자 중심의 유통경제를 한 걸음 앞당길 수 있다. 특정 상품에 대한 가격과 상세 정보를 일목요연하게 제공받는 구매자들은 보다 현명한 구매를 할 수 있으며, 거래과정에서 판매자(생산자)와 구매자의 협상력이 구매자에게로 옮겨질 수 있다. 본 논문이 제시한 비교쇼핑에이전트는 소비자 중심의 사이버 유통시대를 촉진하는데 일익을 담당하는데 그 의의가 있다.

• 전기화학회지
• /
• 제17권2호
• /
• pp.130-137
• /
• 2014

본 연구에서는 스크린 프린팅 방법을 이용하여 이산화납($PbO_2$)/탄소 반죽 전극을 제작하고, 이를 전기화학 방법의 과일 천연당(포도당, 자당, 과당) 측정용 센서로 이용하였다. 이산화납/탄소 반죽전극은 탄수화물과 같은 유기화합물의 전기화학적 산화촉매 신호를 측정함으로써 효소를 사용하지 않고도 당의 측정이 가능하다. 또한 측정 시 심각한 방해작용을 하는 아스코르브산(ascorbic acid)은 Nafion 막을 전극표면에 도입함으로써 효과적으로 감소시켰다. 최적화된 Nafion/이산화납/탄소 반죽 전극은 사람이 느끼는 상대당도(과당>자당>포도당)와 유사하게 각 당에 대한 감응신호를 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.734-736
• /
• 2012

II-VI족 화합물반도체인 CdTe는 태양광을 전기로 변화하는데 있어서 이상적인 1.45eV의 직접천이형 에너지 band gap을 가지고 있으며, $1{\mu}m$ 내외의 두께로도 가시광의 99%이상을 흡수하는 높은 광흡수 계수를 가지므로 얇은 두께로도 태양전지 제작이 가능하다. 현재 CdTe를 이용한 태양전지는 최고 16.5%의 변환효율을 보이고 있으며, 대면적의 module에서는 10% 이상의 효율을 나타내고 있다. CdTe 박막의 제작 방법으로는 스크린 프린팅법(screen printing), 스퍼터링법(sputtering), 근접승화법(CSS:close space sublimation) 등이 있는데, 이중 마그네트론 스퍼터법의 경우, 대면적으로 균일하게 증착이 가능하기 때문에 양산화에 적합하고, 증착 온도를 낮출 수 있으며, 성장 중 도핑 제어가 용이한 장점을 갖고 있다. 특히, 필름 형태의 polyimide (PI), molybdenum (Mo) 기판의 경우, 유리기판에 비해 가벼우면서 깨지지 않아 취급이 용이하다는 장점이 있다. 또한 필름 형태로 제작할 경우 유연성이 있는 태양전지 제작이 가능하여 그 응용 범위를 넓힐 수 있다. 본 연구에서는 PI 및 Mo, 유리 기판 위에 마그네트론 스퍼터법으로 CdTe 박막을 증착하고, 제조 조건에 따른 박막의 구조적, 광학적 물성을 조사하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.293.1-293.1
• /
• 2016

Various materials including conductive, dielectric, and semi-conductive materials, constitute suitable candidates for printed electronics. Metal nanoparticles (e.g. Ag, Cu, Ni, Au) are typically used in conductive ink. However, easily oxidized metals, such as Cu, must be processed at low temperatures and as such, photonic sintering has gained significant attention as a new low-temperature processing method. This method is based on the principle of selective heating of a strongly absorbent film, without light-source-induced damage to the transparent substrate. However, Cu nanoparticles used in inks are susceptible to the growth of a native copper-oxide layer on their surface. Copper-oxide-nanoparticle ink subjected to a reduction mechanism has therefore been introduced in an attempt to achieve long-term stability and reliability. In this work, a flash-light sintering process was used for the reduction of an inkjet-printed Cu(II)O thin film to a Cu film. Using a photographic lighting instrument, the intensity of the light (or intense pulse light) was controlled by the charged power (Ws). The resulting changes in the structure, as well as the optical and electrical properties of the light-irradiated Cu(II)O films, were investigated. A Cu thin film was obtained from Cu(II)O via photo-thermal reduction at 2500 Ws. More importantly, at one shot of 3000 Ws, a low sheet resistance value ($0.2527{\Omega}/sq.$) and a high resistivity (${\sim}5.05-6.32{\times}10^{-8}{\Omega}m$), which was ~3.0-3.8 times that of bulk Cu was achieved for the ~200-250-nm-thick film.