• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.69-80
• /
• 1975

Relationships between yield and various nitrogen efficiencies, between efficiencies and between efficiency and nitrogen uptake amount of rice plant were proposed and tested using data from N.P.K simple trials about 30 to 50 locations, for three years. Established relationships are well in accordance with experimental results by showing highly significant correlations between them. The overall indications are that high yielding capacity of fields with fertilizer application, depends primarily on high fertilizer nitrogen uptake by increasing fertilizer use efficiency (Eu), secondly the efficiency (Ef) of absorbed fertilizer nitrogen (Nf) and fertilization efficiency (Fe) and also depends much on nitrogen efficiency for grain yield (E) to great extend and that the efficiency (Es) of soil nitrogen (Ns) contributes to E more than Ef does. All nitrogen efficiencies are negatively correlated with the uptake amount of corresponding nitrogen and counterpart efficiency. Es and Ef could be determined firstly by difference method and secondly E versus Cs (Cs=Ns/Ns+Nf) plotting and thirdly E-Cs plotting with labelled fertilizermethod using the equation E=Es Cs+B where B=Ef Cf but a constant under the given condition and at last Y-Ns plotting with labelled fertilizer using Eq Y=$Es{\cdot}Ns+B$ where B=$Ef{\cdot}Nf$. Es which seems not much variable from field to field is mostly greater (about 80% of tested fields) than Ef which is much variable and depends much on fertilizer form. The relationships tested and well agreed are as follows: 1. Y=$Es{\cdot}Ns+Ef{\cdot}Nf$ (Y is yield) 2. E=$Es{\cdot}Cs+Ef{\cdot}Cf$ where Cf=Nf/Nf+Ns 3. E=b-aN where E=E, Es or Ef and N=N, Ns or Nf respectively, (E=Y/N, N=Nf+Ns), b is theoretical maximum under the given system and a is tangent at N=O of the curve, Y=EN. 4. Fe=Ef Eu and Se=$Es{\cdot}Eu$ where Se is efficiency of soil available nitrogen. 5. E=$(Se{\cdot}Cs+Fe{\cdot}Cf)/Eu$ 6. Y=$Es{\cdot}Eu{\cdot}Sf+Ef{\cdot}Eu{\cdot}Fn$or Y=$Es{\cdot}Eu{\cdot}Ea{\cdot}Sn+Ef{\cdot}Eu{\cdot}Fn $where Sf=$Ea{\cdot}Sn$, Ea is soil available nitrogen equivalent to fertilizer(Sf) divided by total soil nitrogen (Sn).

• Journal of the Korean institute of surface engineering
• /
• v.33 no.2
• /
• pp.93-100
• /
• 2000

Effects of Ti content and Ti underlayer on the pitting behavior of TiN coated AISI 304 stainless steel have been studied. The stainless steel containing 0.1~1.0wt% Ti were melted with a vacuum melting furnace and heat treated at $1050^{\circ}C$ for 1hr for solutionization. The specimen were coated with l$\mu\textrm{m}$ and 2$\mu\textrm{m}$ thickness of Ti and TiN by E-beam PVD method. The microstructure and phase analysis were conducted by using XRD, XPS and SEM with these specimen. XRD patterns shows that in TiN single-layer only the TiN (111) Peak is major and the other peaks are very weak, but in Ti/TiN double-layer TiN (220) and TiN (200) peaks are developed. It is observed that the surface of coating is covered with titanium oxide (TiO$_2$) and titanium oxynitride ($TiO_2$N) as well as TiN. Corrosion potential on the anodic polarization curve measured in HCl solution increase in proportion to the Ti content of substrate and by a presence of the Ti underlayer, whereas corrosion and passivation current densities are not affected by either of them. The number and size of pits decrease with increasing Ti content and a presence of the coated Ti film as underlayer in the TiN coated stainless steel.

• Honam Mathematical Journal
• /
• v.34 no.1
• /
• pp.103-111
• /
• 2012

Wetzel[5] proved if ${\Gamma}$ is a closed curve of length L in $E^n$, then ${\Gamma}$ lies in some ball of radius [L/4]. In this paper, we generalize Wetzel's result to the non-Euclidean plane with much stronger version. That is to develop a lower bound of length of a triangle inscribed in a circle in non-Euclidean plane in terms of a chord of the circle.

• Communications of the Korean Mathematical Society
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1995

In this paper we show that for each divisor class c of degree zero on a projective curve C (not necessarily smooth), there exists a unique function $\hat{h}_c$ on C up to bounded functions. Section 1 contain basic definitions and a brief summary of classical results on Jacobians and heights. In section 2, we prove the existence of "canonical height" on a singular curves and in section 3 we prove the analogouse results on N$\acute{e}$ron functions for singular curves. This is a part of the author's doctorial thesis at Ewha Womens University under the guidence of professor Sung Sik Woo.g Sik Woo.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.27-31
• /
• 2011

우리나라의 지점들은 강우자료 관측기간이 다른 나라에 비해 상대적으로 짧고 50년이 넘는 지점이 적기 때문에 지점빈도해석에 의한 확률강우량 추정시 불확실성을 내포하는 문제점을 갖고 있다. 또한, 긴 재현기간에 대한 확률강우량 추정시 더 큰 불확실성이 내포되는데 이러한 이유로 짧은 강우 관측기간의 문제를 보완하고자 지역빈도해석 기법에 대한 연구가 진행되고 있다. 본 연구에서는 전국의 838개소 지점자료로부터 지속기간별 연 최대 강우자료를 추출하였으며, FORGEX 기법의 절차에 따라 확률강우량을 추정하고자 하는 대상지점을 중심으로 네트워크를 구성하였다. 강우자료에 대하여 자료 이상치 보정 후 지속시간별 연 최대강우량 자료를 추출하여 신뢰성 있는 자료를 구축하였다. 구축된 자료를 토대로 중앙값(median)을 이용하여 표준화하였으며 자료 보존기간이 상대적으로 긴 대상지점들을 중심으로 네트워크를 형성하였다. 네트워크별로 pooled points 자료와 netmax 자료를 매년마다 추출하여 구축하였고 이 자료를 이용하여 성장곡선을 유도한 뒤 긴 재현기간에 대한 확률강우량을 구하였다. 또한, 우리나라 강우자료의 지역빈도해석에 적합한 모집단 성장곡선으로부터 netmax 자료의 분포 위치를 조사하기 위하여 강우지점자료를 토대로 기존의 영국에서 사용된 $lnN_e$식이 아닌 새로운 $lnN_e$식을 산정하여 FORGEX기법을 적용하였다. $lnN_e$식은 GEV분포를 토대로 기상청 산하 545개소 지점자료를 이용하여 산정하였다. 지점빈도해석과 FORGEX 그리고 새로운 $lnN_e$식이 도입된 FORGEX기법을 적용하였고, 긴 재현기간에 대한 확률강우량 값을 비교 분석하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.3
• /
• pp.17-25
• /
• 2007

Delegation of signing capability is a common practice in various applications. Mambo et al. proposed a proxy signatures as a solutions for delegation of signing capability. Proxy signatures allow a designated proxy signer to sign on behalf of an original signer. After the concept of proxy signature scheme is proposed, many variants are proposed to support more general delegation setting. To capture all possible delegation structures, the concept of delegation network was proposed by Aura. ID-based cryptography, which is suited for flexible environment, is desirable to construct a delegation network. Chow et al proposed an ID-based delegation network. In the computational point of view, their solution requires E pairing operations and N elliptic curve scalar multiplications where E and N are the number of edges and nodes in a delegation structure, respectively. In this paper, we proposed an efficient ID-based delegation network which requires only E pairing operations. Moreover, we can design a modified delegation network that requires only N pairing operations.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.107-116
• /
• 1994

In the manufacturing of VLSI circuits, variations of device characteristics due to the slight differences in process parameters drastically aggravate the performances of fabricated devices. Therefore, it is very important to establish optimal process conditions in order to minimize deviations of device characteristics. In this paper, we used one-dimensional process simulator, SUPREM-II, and two dimensional device simulator, MINIMOS 4.0 in order to extract optimal process parameter which can minimize changes of the device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derived the dependence relations between process parameters and device characteristics. Here, we have suggested a method to extract process parameters from design trend curve(DTC) obtained by these dependence relations. And we have discussed short channel effects and device limitations by scaling down MOSFET dimensions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.570-575
• /
• 2002

This paper presents a new circular curve fitting approach of articulated manipulators, based on pseudoinverses. The paper aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a start point and an end point. In this paper, two algorithms of circular interpolation are presented. Prior to circular interpolation, are a spherical fitting should be performed, using least squares. In the first algorithm, the relationship between point data and normal vector on the sphere is used. In the second algorithm. the equation of plane which can be obtained from 3 points, i.e., a start point, an end point, and center of a sphere. The proposed algorithms are show to be efficient by using MATLAB-based simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.585-588
• /
• 2005

The dissolution characteristic of metal shows the different tendency according to the applied electrical potential, the kind of electrolyte and pH value, etc. In the micro electrochemical machining (ECM), unfavorable oxide/passive layer formation and overall corrosion of electrodes must be prevented. The anodic polarization curve of nickel has distinct three dissolution regions, i.e. two active regions and the transpassive dissolution region. In this paper, the stable electrode potentials of workpiece and tool were determined in sulfuric acid and hydrochloric acid solution, respectively. In each solution, different machining property was shown and possible electrochemical reactions were discussed. On the basis of this experiment, the methodology to obtain the proper electrode potential was suggested.