• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2948-2957
• /
• 2000

A broadband access network in B- ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. To establish an end-to-end ATM connection, interworking functions between \'B5.2 interface's connection protocol and the signalling protocol, are perfonned at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. In this paper, we analyze and simulate above two interworking models in tenns of a connection setup delay and completion ratio, when call requests with eBR and VBR transfer capability arrive at the service node. We observed that the completion ratios of the two interworking models are quite closed. However the connection setup delay of parallel interworking model is improved by about 33% compared with that of the sequential interworking model.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.479-484
• /
• 2005

Raynaud's syndrome causes discolorization, ischemic claudication(pain) and necrosis of the digits through insufficiency in the circulation which is induced by intermittent spasms of the digital arteries. From January, 2002 to December, 2004, 10 patients were surgically treated for Raynaud's syndrome. 9 patients were female and 1 patient was male. 2 patients showed unilateral involvement, 8 patients were operated on both hands. 6 patients had necrotic changes on the finger tips due to the disease. Ages ranged from 21 to 60 with an average of 39.1. Ischemic pain, discolorization, and cold intolerance of the digits were the common symptoms. All patients were evaluated with color doppler before the surgery. Two different procedures were applied according to the severity of the disease: Patients with decreased circulation received, what we call a limited digital sympathectomy, i.e. stripping of the adventitia of the ulnar, radial and common digital arteries. An extended procedure, radical digital sympathectomy, was performed on patients with a complete block of circulation. Stripping of the adventitia in these patients also involved the proper digital arteries. Symptoms like discolorization, ischemic pain, and cold intolerance improved immediately after the surgery. The patients did not suffer from pain even with exposure to cold weather. We conclude that digital sympathectomy could improve the symptoms in Raynaud's patients who do not respond to conservative treatment such as calcium channel blocker and other vasodilators.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.268-275
• /
• 2005

Early predictions of crop yields call provide information to producers to take advantages of opportunities into market places, to assess national food security, and to provide early food shortage warning. The objectives of this study were to identify the most useful parameters for estimating yields and to compare two model selection methods for finding the 'best' model developed by multiple linear regression. This research was conducted in two 65ha corn/soybean rotation fields located in east central South Dakota. Data used to develop models were small temporal variability information (STVI: elevation, apparent electrical conductivity $(EC_a)$, slope), large temporal variability information (LTVI : inorganic N, Olsen P, soil moisture), and remote sensing information (green, red, and NIR bands and normalized difference vegetation index (NDVI), green normalized difference vegetation index (GDVI)). Second order Akaike's Information Criterion (AICc) and Stepwise multiple regression were used to develop the best-fitting equations in each system (information groups). The models with $\Delta_i\leq2$ were selected and 22 and 37 models were selected at Moody and Brookings, respectively. Based on the results, the most useful variables to estimate corn yield were different in each field. Elevation and $EC_a$ were consistently the most useful variables in both fields and most of the systems. Model selection was different in each field. Different number of variables were selected in different fields. These results might be contributed to different landscapes and management histories of the study fields. The most common variables selected by AICc and Stepwise were different. In validation, Stepwise was slightly better than AICc at Moody and at Brookings AICc was slightly better than Stepwise. Results suggest that the Alec approach can be used to identify the most useful information and select the 'best' yield models for production fields.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.560-567
• /
• 2013

The release of iPhone by Apple in 2009 has changed the life pattern of an individual tremendously. That is, with the emergence of a smart phone, various services including voice/video call, camera, receiving and sending of e-mail, and web browsing have been realized. However, the broader the scope of the use of a smart phone has become, the greater the need for companies to introduce an MDM solution for protecting important documents has become. However the MDM solution may have a problem in that all data such as contacts, pictures, and memos saved in the smart phone can be accessed unlimitedly. For this reason, there is a risk that unwanted violation of privacy may happen to smart phone users. This paper proposed a plan to protect a personal privacy file of smart phone users, which disables access by others except for related smart phone users by enabling a person in charge of security or an MDM manager in a company to have access only to the file which was allowed by smart phone users to be disclosed and by saving non-disclosed files in a virtual disk.

• The Journal of the Korea Contents Association
• /
• v.16 no.6
• /
• pp.529-536
• /
• 2016

The purpose of this research is to evaluate the quality of Differential Police Response strategy. Although it has been approximately three years since these new police response systems were introduced, there is no research to evaluate them empirically. Using two types of statistical quality control techniques, Xbar-R control charts for variables data and P charts for attributes data, this study analyzes approximately 3,000 calls reported throughout the year 2012 to the 112 Integrated Dispatch Center in Ik-san police station. The Xbar-R control charts revealed that the police did not consistently respond to an emergency call for service (i.e., code one case) within 3 minutes. The P control chart also identified that there was a significant variation in the portion/number of defective calls where police failed to respond to non-emergency calls for service within 5 minutes. The results from this study suggest the police may need to review the target response time for code 1 and code 2 respectively.

• Korean Journal of Logic
• /
• v.18 no.2
• /
• pp.167-195
• /
• 2015

This paper aims to respond to Weisberg's claim that the standard Bayesian epistemology cannot model an agent's belief updating that is triggered by some undermining evidence. Our epistemological intuition seems to require that the undermining evidence decreases some particular relevant credences. According to Weisberg, however, such a belief change cannot result from the standard Bayesian belief updating rules-i.e., (Jeffrey) Conditionalization. This is because probabilistic independence between some propositions is preserved under (Jeffrey) Conditionalization on the relevant evidence. Yet I will show in this paper that this conclusion is somewhat hasty. In particular, I will show that there is another version of Conditionalization and that when one updates her credences by means of such a version, the belief updating originated in undermining evidence can be well modeled in the Bayesian framework. Some authors often call the version Higher Order Conditionalization.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.826-831
• /
• 1988

This paper presents an approach to segment an image into areas of surfaces, and to compute the surface properties from a gray-scale image in order to describe the surfaces for reconstruction of the 3-D shape of the objects. In general, an rigid body has several surfaces and many edges. But if it is not polyhedoron, it is necessary not only to describe the relation between surfaces, i.e. its line drawings but also to represent the surfaces' equations itself. In order to compute the surfaces' equation we use a probability of edge distribution. At first it is extracted edges from a gray-level image as much as possible. These are not only the points that maximize the change of an image intensuty but candidates which can be seemed to be edges. Next, other character of a surface (color, coordinates and image intensity) are extracted. In our study, we call the all feature of a surface as "texture", for example color, intensity level, orientation of an edge, shape of a surface and so on. These features of a surface on a pixel of an image plane are mapped to a point of the feature space, and segmented to each groups by cluster analysis on this space. These groups are considered to represent object surface in an image plane. Finally, the states of object surface in 3-D space are computed from distributional probability of local and overall statistical features of a surface, and from shape of a surface.a surface.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.384-395
• /
• 1987

This paper aims to identify the class characteristics of tenants. To this end Patnaik's model is selected, because this model is most reasonable for sorting class structures of tenants. In his Model, "labor-exploitation criterion" is the main criterion for identifying class status. According to this criterion, there are five rural classes i.e. landlord, rich peasant, middle peasant, poor peasant, and full-time laborer. "Net labor ratio" is used for this purpose as empirical data handling. Net labor ratio is a ratio of net labor hired in to family labor, if hired in labor is more then this ratio is positive, and if hired out labor is more then the ratio is negative. Hired in and hired out labor includes not only direct labor but indirect labor such as labor employment or sales through rent. The results of this study are summarized as First, almost all tenants and owner cultivators are of the middle peasant class. Second, there are no rich peasant among the tenants, but 5% of owner cultivators are rich peasants, and 10% of tenants are poor peasants, owner cultivators are 1%. Third, the net: labor ratio of tenants is -0.211, and that of owners is 0.143. There are differences between tenants and owner cultivators even if land is much the same, and owner cultivators net labor ratio is positive except in the land size of 0.3-0.5ha, but that of the tenants' is negative. Fourth, proto-labor poor peasants earned 25% of income from labor, compared with under 10% of proto-tenant poor passant's. Rent to income ratio is almost 60% of proto-tenant, 27% of proto-labor among poor peasants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.3-18
• /
• 1996

The aim of this study is to clarify the style of fashion design which represented three types of erotic mood. And it will have its significance in finding out some standards which call be applied to practical designing. The positive analysis on this study is composed of two parts-the analysis of fashion journals and of questionaire. Analysis of fashion design is to seize and to compare frequence of 17 style of fashion design in the delivery of erotic mood in $\ulcorner$Mot$\lrcorner$ and $\ulcorner$Vogue$\lrcorner$. The questionaire is to investigate preference and inclination of perception in erotic mood of 17 style of fashion design by sex and age. The results were as follows: 1) In $\ulcorner$Vogue$\lrcorner$ than in $\ulcorner$Mot$\lrcorner$ erotic style ate actively made use of. 2) To suggest style of fashion design expressed 3 moods of erotic can be applied to practical designing is as follows. Expression of 'romantic & mysterious' mood is desirab]e exposed body line in motion style in male, twenties and thirties. Expression of 'seductive h stimulating' mood is desirable bosom exposure, leg exposure, adhere of bosom, adhere of waist, seen-through leg, slit, exposed body line in motion style in male and twenties and seen-through bosom, adhere of hip, slash style in male. This mood is desirable exposed body line motion style in thirties and forties. Expression of 'sensuous & attractive' mood is desirable bosom exposure, leg exposure, adhere of bosom, adhere of waist, seen-through leg, slit, exposed body line in motion style in male and twenties and adhere of hip, seen-through bosom, slash style ill male. And this mood is desirable adhere of waist, arm exposure style in female and adhere of waist, exposed body line in motif style in thirties and forties.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.50-50
• /
• 2000

In this paper, a new measuring system is :proposed which can measure the fine 6-DOF displacement of rigid bodies. Its measurement principle is based on detection of laser beam reflected from a specially fabricated mirror that looks like a triangular pyramid having an equilateral cross-sectional shape. The mirror has three lateral reflective surfaces inclined 45$^{\circ}$ to its bottom surface. We call this mirror 3-facet mirror. The 3-facet mirror is mounted on the object whose 6-DOF displacement is to be measured. The measurement is operated by a laser-based optical system composed of a 3-facet mirror, a laser source, three position-sensitive detectors(PSD). In the sensor system, three PSDs are located at three corner points of a triangular formation, which is an equilateral triangular formation tying parallel to the reference plane. The sensitive areas of three PSDs are oriented toward the center point of the triangular formation. The object whose 6-DOF displacement is to be measured is situated at the center with the 3-facet mirror on its top surface. A laser beam is emitted from the laser source located at the upright position and vertically incident on the top of the 3-fatcet mirror. Since each reflective facet faces toward each PSD, the laser beam is reflected at the 3-facet mirror and splits into three sub-beams, each of which is reflected from the three facets and finally arrives at three PSDs, respectively. Since each PSD is a 2-dimensional sensor, we can acquire the information on the 6-DOF displacement of the 3-facet mirror. From this principle, we can get 6-DOF displacement of any object simply by mounting the 3-facet mirror on the object. In this paper, we model the relationship between the 6-DOF displacement of the object and the outputs of three PSDs. And, a series of simulations are performed to demonstrate the effectiveness of the proposed method. The simulation results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects.