• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.157-170
• /
• 2007

Purpose: This investigation was designed to determine the translucency and color stability of various core ceramics for all-ceramic restoration using the CIE $L^*a^*b^*$ system. Material and Methods: IPS e.max Press ceramic(Ivoclar-Vivadent, Liechtenstein), $LAVA^{TM}$ All Ceramic(3M-Espe, Germany), Cercon Smart Ceramic(Dentsply, Germany), and Z-match Ceramic(DentAim, Korea) were used for this study. For the specimens of zirconia oxide ceramics, the as-sintered cylindrical blanks($11.0{\times}25.0mm$) were machined into the shape of a disk(0.4, 0.8, 1.5 mm in thickness, 10 mm in diameters) with a diamond grind machine. The IPS e.max Press specimens ($0.8{\times}10mm$) were fabricated using the "lost wax" technique. CIE $L^*a^*b^*$ coordinates and light transmission were recorded for each specimen with a spectrophotometer(CM-2600d, Minolta, Japan). Color differences were calculated using the equation, ${\Delta}E^*ab=[({\Delta}L^*)2+({\Delta}a^*)2+({\Delta}b^*)2]1/2$. Results: The results were obtained as follows: 1. The most translucent group was IPS e.max Press ceramic that is a glass-ceramic, and $Lava^{TM}$ and Z-match ceramic were more translucent than Cercon Smart ceramic in zirconia ceramic group. 2. In the all groups, there was no significant translucent change after 6 times heat-treatments required to make a final restoration. 3. Colored zirconia was showed more yellowish and dark than uncolored zirconia. 4. After heat-pressing, IPS e.max Press ceramic was showed high ${\Delta}E^*ab$ value(4.1 of eM1, 6.8 of eM2) that means to be more whiter than before heat-pressing. However, there was no color change after additive heat treatments for final restoration. 5. In the colored zirconia groups, there was no significant color change after some heat-treatments required to make a final restoration.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.5
• /
• pp.695-700
• /
• 2016

Objectives: The purpose of the study was to investigate the effect of CAD/CAM ceramic thickness on shade. Methods: 24 disk-shaped ceramic specimens (E.Max CAD & Empress CAD, $12mm{\times}12mm$) were prepared and divided into 4 groups (n=6). Ceramic specimens in 2 thicknesses (0.8 mm, 1.0 mm) were made low translucency(LT) shade A2. All specimens were measured as L*, a*, b* using spectrophotometer. The color differences(${\Delta}E$ values) between the specimen and a control target block ($12{\times}12{\times}1.2mm$) were calculated. Two-way ANOVA performed between 2 groups(material and thickness). Results: As the thickness increased, the $L^*$ (for all groups) and $b^*$ value (for all groups) increased and the $a^*$ value(for LR group) decreased. The mean color differences caused by thickness was acceptible (${\Delta}E$ > 2) for group LD1. But the mean color differences by thickness were not selected (${\Delta}E$ < 2) for group LD2, LR1, LR2. Conclusions: The different thickness can influence the final color of CAD/CAM ceramic.

• Korean Journal of Microbiology
• /
• v.26 no.4
• /
• pp.291-297
• /
• 1988

Three alleles of rbsB gene, rbsB, rbsB103, and rbsB106 from the wild type, the mutant and the revertant strain, respectively, were cloned for overproduction of proteins under the control of lambda $P_{L}$ promoter. Five different species of precursor and mature ribose-binding proteins were purified to homogeneity using DEAE-Sephadex column chromatography, osmotic shock pocedure, CM-Sephadex column chromatography, and Chromatofocusing column chromaography. pI of the precursor proteins and mature proteins were determined and found to be pH 8.0 and 7.5, respectively. The purified proteins were subjected to amino acid sequencing. The results confirmed the amino acid changes deduced from the DNA sequencing.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.83-90
• /
• 2000

In this paper, a stacked circular-disk microstrip 1${\times}$4 array antenna was designed and manufactured and tested to apply in next generation mobile communication, on IMT-2000 system(up-link: 1.885 GHz∼2.025 GHz, down-link: 2.11 GHz∼2.2 GHz) base station which has dual frequency, broadband and high-gain characteristics. The experimental results are as follows : resonant frequency of 1.885 GHz and 2.178 GHz VSWR (1.064 , 1.432), return loss (-30.19 dB , -24.99 dB), band width (VSWR<2) are 402 MHz, -3dB beam width at radiation pattern are ${\alpha}$E-16.8$^{\circ}$, ${\alpha}$H-69$^{\circ}$(1.885 GHz) and ${\alpha}$E-l5.2$^{\circ}$, ${\alpha}$H-51.5$^{\circ}$(2.178 GHz), gain(13.7 dBi∼15.21 dBi).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.176-182
• /
• 2018

One of the most important factor of esthetic prosthesis is the color of the teeth. Zirconia is produced in the process of design, milling, coloring, drying, and sintering. The effect of the drying degree of zirconia colorant on the color tone is examined. For the experiment, a total of 45 zirconia specimens(15 for each) were fabricated by using cad/cam system. The zirconia specimens(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ)) were then subjected to zirconia sintering in accordance with the manufacturer's instructions, using a chemical coloring agent to Non-drying(0sec), intermediate (10sec), and completely dried (10min) temperature holding times. The color tone was measured using a spectrophotometer. The results were analyzed with a One-way analysis of variance and the Tukey post-hoc test (${\alpha}=.05$) The $L^*$ values of L, A specimens, $a^*$ values of A specimens, and $b^*$ values of Z specimens were not statistically different according to the degree of drying (p>0.05), While the $L^*$ value of Z specimen, $a^*$ value of L, Z specimen, $b^*$ values of L, A specimens were statistically different according to the degree of drying(p <0.05). In conclusion, the drying of zirconia colourants improves zirconia brightness and increases the optical properties of the enamel.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.333-344
• /
• 1995

Cu를 함유한 2종의 저합금 고장력강(HSLA-A, HSLA-B)\ulcorner 기계적 성질에 미치는 시효처리의 영향을 조사하였다. 탄소량이 적음에도 불구하고 Cu첨가로 석출물을 생성시킴으로서 2합금 모두 $650^{\circ}C$에서 시효한 경우 양호한 강도(HSLA-A:Y.S 703Mpa, E.L 22.6% HSLA-B:Y.S 810 Mpa, E.L 23.8%)와 인성(HSLA-A:271.4J, HSLA-B:197.5J at -5$0^{\circ}C$)의 조합을 나타내었다. 50$0^{\circ}C$에서 시효할 때 가장 높은 항복 강도를 나타내나 인성은 아주 낮은 값을 나타내었다. 50$0^{\circ}C$이상 시효 온도가 증가하면 강도는 감소하고 인성은 증가하였다. HSLA-B강의 강도가 HSLA-A 강보다 높은데, \ulcorner칭 상태에서의 강도 차이는 경화능을 증가시키는 원소인 Ni, Mn, Mo, Cu의 첨가량 차이에 의한 기지 조직의 차이에 의한 것이며, 시효한 상태에서의 강도 차이는 기지 조직과 석출 강화에 기여하는 Cu량의 차이에 의한 것으로 판단된다. 시효 경화 곡선에서 $700^{\circ}C$에서의 경도 증가는 오스테나이트-페라이트 2상 영역으로부터 냉각시 생성된 “M-A constituents”에 의한 것이다. HSLA-A강과 HSLA-B강의 충격 천이 온도는 각각 -1$25^{\circ}C$와 -145$^{\circ}C$이었다.

• YAKHAK HOEJI
• /
• v.48 no.5
• /
• pp.272-277
• /
• 2004

The 2-amino-l-phenylpropanols 4∼7 were reacted with isothiocyanates to afford the 20 thioureido MAPP derivatives 8a∼11e, which were tested their cytotoxic activity by MTT assay. The cytotoxicity of alkylthioureido compounds were increased and decreased by alkyl chain length from $C_{8}$ to $C_{14}$ and of phenylthioureido compounds showed poor activity. The compounds (8b, 8c, 9b, 9c, l0b, 10c, 11b, 11c) with $C_{10}$ and $C_{12}$ alkyl chains gave stronger activity than reference compound B13. The $IC_{50}$/ of compound 8c was 1.05$\mu$M and 3 times stronger activity than B13. The stereochemistry of synthesized compounds affected very little to cytotoxic activity.

• YAKHAK HOEJI
• /
• v.43 no.5
• /
• pp.559-565
• /
• 1999

The two gericudranin E derivatives, GER-I & II, were synthesized and evaluated their antitumour activities for the elucidation of structure-activity relationship. 2,4,6-Trihydroxyacetophenone was converted to target molecules GER-I and GER-B in 5 steps via sequential protection, aldol condensation, Michael type-cyclization, regioselective C-benzylation. The cellular growth inhibition of compounds GER-I and GER-II were investigated against P388, L1210, K562, HCT-15, SK-HepG-1, MCF-7 as cancer cell lines and mouse splenocytes as a normal cell by MTT assay.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.64-71
• /
• 2007

The purposes of this study were to determine correlations between the Berg Balance Test (BBS), Timed -UP & Go Test, Fugl Meyer-L/E, Balance, Sensory (FM-L/E, B, S), Motor Assessment Scale-Gait (MAS-G), Comfortable maximal Gait Speed (C MGS), and the Modified Barthel Index (MBI). The subjects were 40 stroke patients of the Korea National Rehabilitation Center in Seoul. Main outcome measures were Balance control (BBS, FM-B), Gait (TUG, C MGS, MAS-G), ADL (MBI) and Motor Function of Lower Extremities (FM-L/E, S). The data were analyzed using Pearson product correlation. FM scales between other clinical and instrumental indexes and multiple stepwise regression analyses were performed to identify prognostic factors for Balance, Gait and ADL Motor Function of Lower Extremity inclinations. The results of this study were as follows: The BBS, FM-L/E, balance, sensory and MBI showed positive correlation relations, but TUG and C MGS showed negative correlations. The sensory factor of the FM-scale showed the strongest variance in predicting BBS. However the FM-balance showed the strongest variance in predicting TUG, MAS-G and C MGS. The use of both quantitative and qualitative scales was shown to be a good measuring instrument for the classification of the general clinical performance of the patients.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.537-543
• /
• 2005

Subtilisin (EC 3.4.21.14) is the major extracellular alkaline serine protease of Bacillus species. Previously, we found that subtilisins did not migrate in the electrophoretic field in the Laemmili buffer system due to their high pI values (over 8.8); however, it formed a 'binding mode' at the top of the separating gel [5]. Utilizing this characteristic, four subtilisins from Bacillus sp. strains (e.g., B. subtilis 168, B. subtilis KCTC 1021, B. amyloliquefaciens KCTC 3002, and Bacillus sp. DJ-1 and DJ-4) were easily and quickly identified by an over-running electrophoretic technique with a miniscale culture supernatant (less than 20 ml) without any column chromatographic steps. Two subtilisins (DJ-l and a recombinant version) from Bacillus sp. DJ-l were characterized, and the enzymatic properties were determined by SDS-fibrin zymography and densitometric analysis. Based on this observation, the recombinant pro-subtilisin DJ-l showed the same 'binding mode,' similar to native subtilisin DJ-l. On the other hand, mature subtilisin DJ -1 without pro-peptide showed no enzymatic activity.