• E2M - 전기 전자와 첨단 소재
• /
• 제19권12호
• /
• pp.20-27
• /
• 2006

• E2M - 전기 전자와 첨단 소재
• /
• 제16권11호
• /
• pp.24-29
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.182.2-182.2
• /
• 2015

최근 학계나 산업계에서 투명 전자 소자에 대하여 활발한 연구가 진행되면서, 투명 전 도성 산화물(TCO: transparent conductive oxide)에 대한 관심이 높아지고 있다. 대표적인 TCO 물질인 Indium Tin Oxide (ITO)는 가시 광 영역에서의 높은 투과 및 높은 도전성을 가져 전압을 인가하면 발열이 가능하므로 이를 투명 면상 발열체에 적용시키는 연구가 활발히 진행되고 있다. 하지만, ITO는 발열 테스트 결과 온도가 상승함에 따라 발열이 일부분에 집중되는 현상이 있으며, 전도성을 높이기 위하여 추가공정이 필요하다. 또한, 글라스의 곡면 부분에서 ITO를 사용하면 유연성이 부족하므로 크랙이 발생한다는 단점이 있다. 따라서, 최근 Silver nanowire (AgNW), Single-walled Carbon nanotube (SWCNT), ITO를 기반으로 한 AgNW에 ITO를 증착 하거나 SWCNT를 코팅하여 우수한 전기적, 광학적 특성을 지닌 하이브리드 전극이 투명 면상 발열체 재료로서 사용되고 있다. 하지만 대체된 재료들도 다양한 문제점을 가지고 있다. 예를 들어 고온에서 발열을 유지하지 못하고 끊어지거나 가시광영역의 투과율이 낮은 점 등이 있다. 이런 다양한 문제점들을 보완 할 수 있는 새로운 투명 면상 발열체에 적용한 연구가 요구되고 있다. 본 연구에서는 GZO/Ag/GZO 하이브리드 구조의 투명 면상 발열체를 제작하여 전기적, 광학적 특성을 비교하고 발열량, 온도 균일 성, 발열 유지 안정도를 확인하였다. 본 연구에서는 $50{\times}50mm$ 크기의 Non-alkali glass (삼성코닝 E2000) 기판 상에 DC마그네트론 스퍼터링 공정을 이용하여 상온에서 GZO, Ag, GZO 박막을 연속적으로 증착 하여 다층구조의 하이브리드형 투명 면상 발열체를 제조하였다. 박막 증착 파워는 DC (Ag) power 50 W, RF (GZO) power 200 W로 하였으며 GZO박막두께는 45 nm로 고정 시키고 Ag박막 두께는 5~20 nm로 변화를 주었다. 증착원은 3인치 GZO 세라믹 타깃 (2.27 wt. % Ga2O3) 과 Ag 금속 타깃 (순도 99.99%)을 사용하였으며, Ar을 40 sccm 주입 후 Working pressure는 고 순도 Ar을 사용하여 1.0 Pa로 고정하며 10분간 Pre-sputtering을하고 증착을 진행하였다. 앞선 실험을 통해 증착한 박막의 전기적, 광학적 특성은 각각 Hall-effect measurements system (ECOPIA, HMS3000), UV-Vis spectrophotometer (UV-1800, Shimadzu)를 사용해 측정 되었으며, 하이브리드 표면의 구조 및 형상은 FESEM으로 관찰하였다. 또한 표면온도 측정기infrared camera (IR camera)를 이용하여 4~12 V/cm의 전압을 인가 시 시간에 따른 투명 면상 발열체의 표면 온도변화를 관찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.9-14
• /
• 1996

The dependence of microstructural and optical properties of Ag-In-Sb-Te thin films on annealing heat-treatments was studied. It was found from the present work that the increase of reflectance after annealing heat-treatment is related with phase change of Ag-In-Sb-Te thin film from amorphous state to crystalline phases which involve Sb crystalline phase and AgInTe$_2$ stoichiometric phase. On the other hand, the reflectance is decreased after high temperature annealing (above 450$^{\circ}C$), due to the morphology .mange of film surface. For the purpose of practical application(erasable optical disk), we fabricated quadrilayered Ag-In-Sb-Te alloy disk, and annealed it with continuous laser beam. As result of this laser\ulcorner annealing treatment, we found that the increment of reflectance is 9.3% at 780nm wavelength. It might be considered that Ag-In-Sb-Te alloy optical disk is the big promising candidate for the erasable optical memory medium.

• Parasites, Hosts and Diseases
• /
• 제49권1호
• /
• pp.33-38
• /
• 2011

Prompt and accurate diagnosis of malaria is the key to prevent disease morbidity and mortality. This study was carried out to evaluate diagnostic performance of 3 commercial rapid detection tests (RDTs), i.e., Malaria Antigen Pf/Pan$^{TM}$, Malaria Ag-Pf$^{TM}$, and Malaria Ag-Pv$^{TM}$ tests, in comparison with the microscopic and PCR methods. A total of 460 blood samples microscopically positive for Plasmodium falciparum (211 samples), P. vivax (218), mixed with P. falciparum and P. vivax (30), or P. ovale (1), and 124 samples of healthy subjects or patients with other fever-related infections, were collected. The sensitivities of Malaria Ag-Pf$^{TM}$ and Malaria Antigen Pf/Pan$^{TM}$ compared with the microscopic method for P. falciparum or P. vivax detection were 97.6% and 99.0%, or 98.6% and 99.0%, respectively. The specificities of Malaria Ag-Pf$^{TM}$, Malaria Ag-Pv$^{TM}$, and Malaria Antigen Pf/Pan$^{TM}$ were 93.3%,98.8%, and 94.4%, respectively. The sensitivities of Malaria Ag-Pf$^{TM}$, Malaria Antigen Pf/Pan$^{TM}$, and microscopic method, when PCR was used as a reference method for P. falciparum or P. vivax detection were 91.8%, 100%, and 96.7%, or 91.9%,92.6%, and 97.3%, respectively. The specificities of Malaria Ag-Pf$^{TM}$, Malaria Ag-Pv$^{TM}$, Malaria Antigen Pf/Pan$^{TM}$, and microscopic method were 66.2%, 92.7%, 73.9%, and 78.2%, respectively. Results indicated that the diagnostic performances of all the commercial RDTs are satisfactory for application to malaria diagnosis.

• 아시안잔디학회지
• /
• 제9권3호
• /
• pp.235-252
• /
• 1995

Turfgrass Rhizoctonia blight is a severe disease in golf courses in Korea. Attempts were made in 1989 to 1994 to identify the Rhizoctonia species associated with turfgrass blights and also to examine their epidemiology. A total of 120 Rhizoctonia isolates collected were identified as R. solani AG1, R. solani AG2-2, R. cerealis(AG-D) and R. oryzas from brown patch, large patch, yellow patch and white patch, re-spectively. R. solani AG1 was mostly associated with brown patch of cool-season grasses. and most frequently isolated in June through July and also in September. R. solani AG2-2 was isolated exclusively from zoysiagrasses from April to November, most frequently in June through July and October through November. R. cerealis was isolated frequently from both creeping hentgrass in March through April and in November, and zoysiagrass in April and July. Thermophilic R. oryzae was isolated only from creeping bentgrass in August, although with very low frequency. R. solani AG2-2 was strongly pathogenic specifically to Korean lawngrasses(Zoysia japonica, Z.matrella, Z. tenuifolia), but non-pathogenic to creeping bentgrass(Agrostis palustris), bermudagrass (Cynodon dactylon), Kentucky bluegrass(Poa pratensis), perennial ryegrass(Lolium prenne), and creeping red fescue(Festuca rubra subsp. ruhra L.). R. cerealis was strongly pathogenic to zoysiagrass and bentgrass only, but was isolate-specific i.e., from non-pathogenic to pathogenic, for other turfgrasses. The mycelial growth was optimum at relatively high temperature ranges of 25~30$^{\circ}C$ for R.solani AG1, AG2-2 and R. oryzae, while the mycelial growth of R. cerealis was initiated at $^{\circ}C$ and almost ceased at or above $^{\circ}C$.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.333-343
• /
• 2004

Statement of problem: In its preceding work, change in surface characteristics were investigated in consideration that both microtopograpy and macroscopic configuration of implants surface are two of the most important factors, in that they can construct agreeable environment by raising surface energy, to affect osseointegration and biocompatibility explained by cell proliferation. Purpose: This study focused on examining cytocompatibility of dental implants materials Ti-Ag alloys, of which mechanical and electrochemical superiority to cp-Ti or Ti6Al4V were verified, in comparison with that of cp-Ti, and Ti6Al4V. Materials and methods: In this regard, MTT tests for L-929, the fibroblast connective tissues and cell proliferation tests for osteoprogenitor cells, MC3T3-E1 were performed on cp-Ti, Ti6Al4V, and Ti-Ag alloys following thermal oxidation according to appropriate heat treatment temperature(untreated, 400, 600, $800^{\circ}C$) and heat treatment duration(untreated, 0.5, 1, 4 hr). Results: The MTT tests on fibroblasts L-929 resulted in cell viability of over 90% in all experimental group entities, where, especially, the 100% of the viability for Ti-Ag alloys specimens accounted for the slightest adverse effect of ions release from those alloys on the cell. In MC3T3-E1 proliferation tests, the population of cells in the experimental group was roughly increased as experimentation proceeded, after two to four days. Proliferation showed highest viability for most of specimens, including Ti2.0Ag, treated at $600^{\circ}C$. Conclusion: In conclusion, it is the heat treatment temperature, not the duration that has considerable effects on thermal oxidation of specimens. Ti-Ag alloys treated at $600^{\circ}C$ proved to have the best surface morphology as well as cytocompatibility when compared with Ti or Ti6Al4V for short-term biocompatibility tests.

• 한국가정과교육학회지
• /
• 제18권4호
• /
• pp.207-216
• /
• 2006

본 연구는 대구 경북 지역 체육고등학교 남자 운동선수와 일반 고등학교 남학생의 신체 조성과 영양소 섭취 상태를 알아보는 데 목적이 있다. 본 연구는 체육고둥학교 남학생 122명과 일반고등학교 남학생 78명을 대상으로 이루어졌다. 통계자료 분석은 SPSS 12.0 프로그램을 사용하여 평균, 표준편차, t-test를 실시하였다. 본 연구의 결과는 다음과 같이 요약될 수 있다. 첫째, 운동군의 가슴둘레는 비운동군보다 유의적으로 크게 나타났고 비운동군의 엉덩이둘레는 운동군보다 더 큰 것으로 나타났다(p<0.01). 비운동군의 상완삼두근 상완이두근 견갑골하단의 피하지방두께는 운동군보다 유의적으로 높게 나타났다(p<0001). 비운동군의 체지방률과 체지방량은 운동군보다 높게 나타났으며 운동군의 제지방률은 비운동군보다 유의적으로 높게 나타났다(p<0.001). 둘째, 나트륨, 비타민 B6, 비타민 E를 제외한 모든 영양소의 섭취상태에서 운동군이 비운동군보다 높게 나타났다(p<0.001). 운동군은 칼슘을 제외한 모든 영양소에서 영양권장량 이상의 섭취를 하였다. 셋째, 전체적인 영양지식 점수는 비운동군이 운동군보다 유의하게 높게 나타났다 (p<0.05).

• 대한화학회지
• /
• 제33권3호
• /
• pp.281-286
• /
• 1989

벤조히드로옥사믹산(Hben)과 이의 옥소바나듐(IV) 착화합물, $VO(Ben)_2$의 전기화학적 거동을 폴라로그래피와 순환 전압 전류법을 이용하여 조사하였다. Hben의 경우, 아세톤 용매중에서 얻은 폴라로그램은 Ag/AgCl 전극에 대해 -0.05V와 -1.78V에서 두개의 환원파를 나타내었다. 첫번째 환원파는 단일 라디칼 음이온의 생성에, 그리고 두번째 환원파는 이중 라디칼 음이온의 생성에 기인하는 것으로 해석되었다. $VO(Ben)_2$ 착물의 폴라로그램은 +0.55V에서 한개의 산화파를, 그리고 -0.15V와 -1.30V에서 각각 한개씩의 환원파를 나타내었다. +0.55V의 전극반응은 1전자 산화과정이었다$(VO(ben)_2 {\rightleftharpoons} VO(ben)^+ + e)$. -0.15V에 나타난 환원파는 준가역적인 역시 1전자 과정이었으며 $VO(Ben)_2^-$라디칼 형성에 의한 것으로 해석되었다. -1.30V에서 나타난 환원파는 비가역적이며 이 과정에서는 바나디움(III)이온을 생성하는 것으로 믿어진다. 산소 주게 원자를 갖는 Hben 리간드는 황이나 질소를 포함하는 다른 리간드들과 비교해 볼 때 중심금속인 바나듐의 +4가 산화상태의 안정성을 감소시키는 것으로 믿어진다.

• 자원환경지질
• /
• 제21권4호
• /
• pp.367-380
• /
• 1988

Most of the gold (-silver) vein deposits at Yeongdong District are mainly distributed in the precambrian metamorphic rocks. Based on the Ag/Au total production and ore grade ratios, the chemical composition of electrum and the associated sulfides, the gold(-silver) deposits at Yeongdong District may be classified into 4 classes: pyrrhotite - type gold deposits( I), pyrite - type gold deposits (IT A; massive vein), pyrite - type gold deposits (II B; nonmassive vein) and argentite - type gold - silver deposits(III). The chemical study on electrum(including native gold) revealed that Au content (2.8 to 92.4 atomic%) of electrums varies very widely for different classes of deposits. The Au content of electrum associated with pyrrhotite (Class I), ranging from 47.1 to 92.4 atomic% Au, is clearly higher than that associated with pyrite (Classes IIA, IIB and III). In contrast, classes I, II, and III deposits do not show clear differences in Au content of electrum. In general, pyrrhotite - type gold deposits(I) are characterized by features such as simply massive vein morphology, low values in the Ag/Au total production and ore grade ratios, the absence or rarity of silver - bearing minerals except electrum, and distinctively simple mineralogy. Although the geological and mineralogical features and vein morphology of pyrite - type gold deposits(IIA)are very similar to those of pyrrhotite - type gold deposits (I), Class II A deposits reveal significant differences in the associated iron sulfide (i. e. pyrite) with electrum and Au content of electrum. The Ag/Au total production and ore grade ratios from Class II A deposits are relatively slightly higher than those from Class I deposits. Pyrite - type gold deposits(II B) and argentite - type gold - silver deposits (III) have many common features; complex vein morphology, medium to high values in the Ag/Au total production and ore grade ratios and the associated iron sulfide (i. e. pyrite). In contrast to Class II B deposits, Class III deposits have significantly high Ag/Au total production and ore grade ratios. It indicates distinct difference in the abundance of silver minerals (i. e. native silver and argentite). The fluid inclusion analyses and mineralogical data of electrum tarnish method indicate that the gold mineralization of Classes I and II A deposits was deposited at temperatures between $230^{\circ}$ and $370^{\circ}C$, whereas the gold (-silver) mineralization of Classes ITB and ill formed from the temperature range of $150^{\circ}-290^{\circ}C$. Therefore, Classes I and IT A deposits have been formed at higher temperature condition and/or deeper positions than Classes IIB and III.