• 응용통계연구
• /
• 제29권7호
• /
• pp.1311-1327
• /
• 2016

본 논문에서는 종말 사건에 대한 정보는 주어져 있지만 중간 사건이 구간 중도절단되었거나 연구 기간 도중에 추적이 끊겨 중간 사건의 발생 유무를 모르는 준 경쟁 위험 자료에 다중상태모형을 적용하여 모수를 추정하는 방법을 제안하였다. 이를 위해 상태 간 전이 강도는 정규 프레일티를 랜덤효과로 가진 Cox 비례위험모형을 따른다고 가정하였다. 다섯 가지 상태를 가진 다중상태모형에서 가능한 여섯 가지 경로별로 조건부 우도를 정의하였고 주변 우도를 구하기 위해 조정 가우스 구적법을 적용하였으며 뉴튼-랩슨 방법으로 최적 해를 구하였다. 모수의 95% 신뢰구간 포함률을 통해 제안한 방법의 소표본 성질을 살펴보기 위해 모의실험을 수행하였으며, Persones $Ag{\acute{e}}es$ Quid(PAQUID) 자료 (Helmer 등, 2001)에 제안한 모형을 적용하고 그 결과를 해석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2015

Optical resonances of metallic or dielectric nanoantennas enable to effectively convert free-propagating electromagnetic waves to localized electromagnetic fields and vice versa. Plasmonic resonances of metal nanoantennas extremely modify the local density of optical states beyond the optical diffraction limit and thus facilitate highly-efficient light-emitting, nonlinear signal conversion, photovoltaics, and optical trapping. The leaky-mode resonances, or termed Mie resonances, allow dielectric nanoantennas to have a compact size even less than the wavelength scale. The dielectric nanoantennas exhibiting low optical losses and supporting both electric and magnetic resonances provide an alternative to their metallic counterparts. To extend the utility of metal and dielectric nanoantennas in further applications, e.g. metasurfaces and metamaterials, it is required to understand and engineer their scattering characteristics. At first, we characterize resonant plasmonic antenna radiations of a single-crystalline Ag nanowire over a wide spectral range from visible to near infrared regions. Dark-field optical microscope and direct far-field scanning measurements successfully identify the FP resonances and mode matching conditions of the antenna radiation, and reveal the mutual relation between the SPP dispersion and the far-field antenna radiation. Secondly, we perform a systematical study on resonant scattering properties of high-refractive-index dielectric nanoantennas. In this research, we examined Si nanoblock and electron-beam induced deposition (EBID) carbonaceous nanorod structures. Scattering spectra of the transverse-electric (TE) and transverse-magnetic (TM) leaky-mode resonances are measured by dark-field microscope spectroscopy. The leaky-mode resonances result a large scattering cross section approaching the theoretical single-channel scattering limit, and their wide tuning ranges enable vivid structural color generation over the full visible spectrum range from blue to green, yellow, and red. In particular, the lowest-order TM01 mode overcomes the diffraction limit. The finite-difference time-domain method and modal dispersion model successfully reproduce the experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.62-65
• /
• 1995

CdTe crystals were grown by the vertical Bridgman method. P-type DcTe crystals were grown with Cd:Te= 1:1.001 wt. % ratio, while n-type CdTe crystals were 1:1 Also, CdTe:In crystals were investigated, Lattic constants were 6.489${\AA}$ for p-type 6.480${\AA}$for n=type and 6.483${\AA}$ for CdTe:In EPD was 10$\^$-3/-10$\^$4/cm$\^$-2/ for n-, p-type CdTd, 10$\^$4/-10$\^$5/cm$\^$-2 for Cd:Te:In using by E-Ag solution for (111) plane The carrier concentration, the resistivity and the Hall carrier mobility measured by the van der Pauw method were p=5.78${\times}$10$\^$15/cm$\^$-3/, $\rho$=20.2$\Omega$cm, ${\mu}$$\sub$p/=75.6cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for p-typem n=2.98${\times}$10$\^$16/cm$\^$-3/, $\rho$=0.214$\Omega$cm, ${\mu}$$\sub$p/=978.9cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for n-type and n=7.45${\times}$10$\^$16/cm$\^$-3/, $\rho$=1.54 ${\times}$10$\^$3/$\Omega$cm, ${\mu}$$\sub$p/=658.4 cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for CdTe:In crystals, Transmittance of p-type CdTe was 61% that of n-type was 65%, Cd:Te:In showed 60% IR transmittance.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.20.1-20.1
• /
• 2011

The nano-sized quantum structure has been an attractive candidate for investigations of the fundamental physical properties and potential applications of next-generation electronic devices. Metal nano-particles form deep quantum wells between control and tunnel oxides due to a difference in work functions. The charge storage capacity of nanoparticles has led to their use in the development of nano-floating gate memory (NFGM) devices. When compared with conventional floating gate memory devices, NFGM devices offer a number of advantages that have attracted a great deal of attention: a greater inherent scalability, better endurance, a faster write/erase speed, and more processes that are compatible with conventional silicon processes. To improve the performance of NFGM, metal nanocrystals such as Au, Ag, Ni Pt, and W have been proposed due to superior density, a strong coupling with the conduction channel, a wide range of work function selectivity, and a small energy perturbation. In the present study, bismuth metal nanocrystals were self-assembled within high-k $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN) films grown at room temperature in Ar ambient via radio-frequency magnetron sputtering. The work function of the bismuth metal nanocrystals (4.34 eV) was important for nanocrystal-based nonvolatile memory (NVM) applications. If transparent NFGM devices can be integrated with transparent solar cells, non-volatile memory fields will open a new platform for flexible electron devices.

• 한국미생물·생명공학회지
• /
• 제33권1호
• /
• pp.1-8
• /
• 2005

Since Anton van Leeuwen­hoek first observed a surface-associated multicellular structure of bacterial cells in the 17th century, it has been shown to exhibit an ability to form a biofilm by numerous bacterial species. The biofilm formation is composed of distinct developmental stages, which include an attachment/adhesion of a single cell, a proliferation toward monolayered coverage, a propagation to aggregated microcolony, a maturation to 3-dimensional structure, and subsequently a local degradation. Investigation to identify the essential factors for bacterial biofilm formation has been performed via classical genetic approaches as well as recently developed technologies. The initial stage requires bacterial motility provided by a flagellum, and outermembrane components for surface signal interaction. Type IV-pilus and autoaggregation factors, e.g., type I-fimbriae or Ag43, are necessary to reach the stages of monolayer and micro colony. The mature biofilm is equipped with extracellular polymeric matrix and internal water-filled channels. This complex architecture can be achieved by differential expressions of several hundred genes, among which the most studied are the genes encoding exopolysaccharide biosyntheses and quorum-sensing regulatory components. The status of our knowledge for the biofilms found in humans and natural ecosystems is discussed in this minireview.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.5-18
• /
• 1996

The solid state cesium ion source os alumino-silicate based zeolite which contains cerium. The material is an ionic conductor. Cesiums are stably stored in the material and one can extract the cesiums by applying electric field across the electrolyte. Cesium ion bombardment has the unique property of producing high negative ion yield. This ion source is used as the primary source for the production of a negative ion without any gas discharge or the need for a carrier gas. The deposition of materials as an ionic species in the energy range of 1.0 to 300eV is recently recognized as a very promising new thin film technique. This energetic non-thermal equilibrium deposition process produces films by “Kinetic Bonding / Energetic Condensation" mechansim not governed by the common place thermo-mechanical reaction. Under these highly non-equilibrium conditions meta-stable materials are realized and the negative ion is considered to be an optimum paeticle or tool for the purpose. This process differs fundamentally from the conventional ion beam assisted deposition (IBAD) technique such that the ion beam energy transfer to the deposition process is directly coupled the process. Since cesium ion beam sputter deposition process is forming materials with high kinetic energy of metal ion beams, the process provider following unique advantages:(1) to synthesize non thermal-equilibrium materials, (2) to form materials at lower processing temperature than used for conventional chemical of physical vapor deposition, (3) to deposit very uniform, dense, and good adhesive films (4) to make higher doposition rate, (5) to control the ion flux and ion energy independently. Solid state cesium ion beam sputter deposition system has been developed. This source is capable of producing variety of metal ion beams such as C, Si, W, Ta, Mo, Al, Au, Ag, Cr etc. Using this deposition system, several researches have been performed. (1) To produce superior quality amorphous diamond films (2) to produce carbon nitirde hard coatings(Carbon nitride is a new material whose hardness is comparable to the diamond and also has a very high thermal stability.) (3) to produce cesiated amorphous diamond thin film coated Si surface exhibiting negative electron affinity characteristics. In this presentation, the principles of solid state cesium ion beam sputter deposition and several applications of negative metal ion source will be introduced.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.259-264
• /
• 2020

PURPOSE. The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS. For the experimental groups, two commercially available 3D-printing provisional resins (E-Dent 100; EnvisionTEC GmbH, Germany & VeroGlaze™; Stratasys^®, USA), two dental milling blocks (PMMA Disk; Yamahachi Dental Co., Japan & Telio^®CAD; Ivoclar Vivadent AG, Liechtenstein), and two conventional materials (Alike™; GC Co., Japan & Luxatemp automix plus; DMG, Germany) were used. The water sorption and solubility test were (n=10, respectively) carried out according to ISO4049:2000 (International Standards Organization, Geneva, Switzerland). For the color stability test (n=10), coffee and black tea were used as staining solutions, and the specimens were stored for 12 weeks. Data were analyzed by one-way ANOVA and Tukey's HSD using SPSS version 22.0 (SPSS Inc. Chicago, IL, USA) (P<.05). RESULTS. Alike and Veroglaze showed the highest values and Luxatemp showed the lowest water sorption. In the color stability test, the ΔE of conventional materials varied depending on the staining solution. PMMA milling blocks showed a relatively low ΔE up to 4 weeks, and then significantly increased after 8 weeks (P<.05). 3D-printed materials exhibited a high ΔE or a significant increase over time (P<.05). CONCLUSION. The degree of discoloration increased with time, and a visually perceptible color difference value (ΔE) was shown regardless of the materials and solutions. PMMA milled and 3D-printed materials showed more rapid change in discoloration after 8 weeks.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.1003-1010
• /
• 2005

A study consisting of 3 trials was designed to assess the relative biological efficacy of DL-methionine (DL-Met) in comparison to liquid methionine hydroxy analogue (MHA-FA) in growing pigs. In trial I a basal diet was supplemented with three graded levels of DL-methionine (0.25, 0.50 and 0.75 g/kg) or liquid MHA-FA (0.0285, 0.0570 and 0.0855 g/kg) on equimolar basis. The basal diet contained 18.3% CP, 0.22% Met and 0.51% Met+Cys, which is below the methionine requirement for weaned pigs between 10 and 20 kg BW according to NRC (1998) but adequate in all other essential nutrients and energy. Using an exponential model, the efficacy of the two methionine sources was estimated from nitrogen retention data obtained in 42 piglets with an initial BW between 11.0 kg (Exp. 1) and 11.7 kg (Exp. 2). In trials II and III, with a total of 192 and 96 pigs, and with an initial BW of 10.6 and 21 kg, respectively, growth response criteria were assessed to determine if in agreement with previous studies in pigs and poultry a biological effectiveness of about 65% on average could be confirmed for liquid MHA-FA in comparison to DL-met. Based on N-retention (trial I) the biological efficacy of liquid MHA-FA on a weight-to-weight basis was calculated to be 62% relative to DL-met. Basically, these results were confirmed using growth response criteria as measures; the results of trial II and III revealed no significant differences in growth performance and feed conversion between treatments indicating that 100 parts of liquid MHA-FA can be replaced by 65 parts of DL-met.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.403-403
• /
• 2011

결정질 태양전지는 태양전지 시장에 큰 서막을 장식하였다. 현재 여러 종류의 태양전지 기술들이 많이 나오고 있지만 결정질 태양전지는 변환 효율이 좋고 신뢰성이 높아서 높은 시장 점유율을 차지하고 있다. 하지만 응용 분야가 적고 기판 가격이 비싸다는 단점이 있다. 현재에는 응용분야 개선을 위하여 Flexible solar cell에 대한 연구가 활발하다. Flexible solar cell에 상부전극은 결정질 태양전지에서 사용되는 Ag나 Al 전극 대신 TCO 종류의 일종인 ITO를 많이 사용한다. Flexible Solar cell은 Organic Solar cell과 Amorphous Solar Cell 두 가지 범주를 가지고 있다. 본 연구에서는 Amorphous Solar Cell의 전극에 사용되는 ITO의 온도 Stress에 따른 특성을 연구함으로써 Engineer의 근본적인 이슈인 저비용, 고효율에 초점을 맞추어 소자특성을 확인해 보도록 한다. Glass에 E-beam evaporation 장비를 이용하여 ITO를 증착하였고 제작된 소자를 200, 250, 300, 350$^{\circ}C$의 온도변수를 두어 1시간동안 Annealing 하였다. 각 Annealing 온도에 따른 Sheet resistivity,와 visible 영역의 transmittant를 측정하였다. visible영역에서의 transmittant는 Annealing 200$^{\circ}C$에서 300$^{\circ}C$로 온도가 증가함에 따라 transmittant는 증가하다가 350$^{\circ}C$에서 감소하였다. Sheet resistivity의 경우 Annealing 200$^{\circ}C$에서 300$^{\circ}C$로 온도가 증가함에 따라 ITO의 Sheet resistivity가 줄어들다가 350$^{\circ}C$에서 증가하였다. 300$^{\circ}C$로 Annealing한 ITO가 가시광선 영역에서 transmittant가 가장 높은 80%로 측정 되었다. Sheet resistivity역시 300$^{\circ}C$로 Annealing한 ITO가 8${\Omega}/{\Box}$로 가장 낮았다. Annealing 온도가 ITO의 electrical 특성과 optical 특성에 변화를 주었음을 알 수 있었다. Resistivity가 낮은 ITO 전극으로 박막 셀을 제작한다면 좋은 효율을 얻을 수 있을 거라 생각된다.

• 대한두경부종양학회지
• /
• 제14권2호
• /
• pp.191-198
• /
• 1998

Objectives: We performed an immunohistochemical study to examine the place of neovascularization in the tumorigenic process of follicular thyroid carcinoma and to determine whether tumor angiogenic activity in follicular carcinoma plays a role in tumor aggression. Materials & Methods: We studied 63 follicular thyroid carcinomas and compared with 22 follicular adenomas. The areas of capsular invasion, vascular invasion and cellular atypism of the tumor were confimed on H & E stains. The paraffin embedded tissues were stained by the use of monoclonal antibodies against Ag CD34. Microvesseles were counted in the area of highest vascular density at 200 times magnification. The microvessel densities(MVD) were analized in relation to histologic type and location of the tumors. Results: There were 59 minimal invasive types and 4 widely invasive types of carcinoma. In the histologic specimens of carcinomas, capsular invasion was identified in all the cases, vascular invasion in 46 and cellular atypism in 24. Mean values of the MVDs of the minimal invasive carcinomas, the widely invasive carcinomas and the adenomas were $263.8{\pm}69.2,\;256.l{\pm}49.3\;and\;241.5{\pm}159.4$, respectively and there was no significant difference between each group. In follicular carcinomas, there was a regional difference of the MVDs. The areas of tumor showing cellular atypism and adjacent to or penetrating the capsule, in which represents the tumorigenic process of carcinoma, had a higher rate of vascularization, than other areas of the tumor(p<0.05). However, these features were not noted in the follicular adenomas. Conclusion: Although there was no significant difference of the MVD between follicular carcinomas and adenomas, there was a regional difference of the MVD within the carcinomas and the values were significantly higher in the more malignant areas, as indicated by cellular atypism and capsular invasion. Therefore, tumor angiogenic activity measured by MVD may play a role in tumor aggression in follicular thyroid carcinoma.