• The Journal of Korean Physical Therapy
• /
• 제24권6호
• /
• pp.419-422
• /
• 2012

Purpose: Malalignment of the lower limbs may increases the difficulty of maintaining equilibrium. The purpose of this study was to study the effects of genu varum and poor posture in the sagittal plane on postural stability. Methods: We had 27 subjects with varus and 27 normal subjects participate in this study. Subjects for whom the distance between the medial epicondyles in the knee joint was more than 3 cm were classified as varus group, and subjects for whom the distance was less than 3 cm were classified as normal group. The measurements of static and dynamic stability were used overall stability index (OSI), anterioposterior stability index (APSI), and mediolateral stability index (MLSI) using a Biodex balance system. Results: When measuring the static stability index, there were significant differences in the mediolateral stability index between the varus and control groups. When measuring the dynamic stability index, there were significant differences in the overall, anteriorposterior, and mediolateral stability index between the varus and control groups. These results demonstrated that genu varum affects mediolateral movement in static stability, and overall, anterioposterior and mediolateral movements in dynamic stability. Conclusion: As genu varum affects static and dynamic stability in young adults, it increases the risk of injuries or falls. Exercise and surgery are required for realigning the genu varum. Future studies about postural stability in young children and elderly people who have a risk of falls due to lower postural control ability, are needed, as well as in young adults.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.141-146
• /
• 2013

This research investigates the stability analysis for the rotating and the stationary grooved journal bearing. The dynamic coefficients of the journal bearing are calculated by using FEM and the perturbation method. When journal bearing is in whirling motion, the dynamic coefficients have time-varying components as a sine wave due to the reaction force of oil film toward the center of journal even in the steady state. The solutions for the equations of motion can be assumed as the Fourier series expansion. The equations of motion can be rewritten as the linear algebraic equations with respect to the Fourier coefficients. Then, stability of the grooved journal bearing can be calculated by Hill's infinite determinant. The periodic function of dynamic coefficients is derived using Fourier Fast Transform(FFT).The stability of journal bearing is determined as rotating speed increases and the stability of rotating grooved journal bearing is compared and discussed with the stability of stationary grooved journal bearing.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.43-49
• /
• 2012

In the design of high speed railway bridges is important a impact factor as a tool of assessing the dynamic capacitys of bridges. However, the impact factor(or dynamic amplification factor, DAF) of high speed railway bridges may essentially be changeable because the dynamic response is affected by the long train length(380 m), number of axles and high speed velocity(300 km/h)(Korea Train eXpress: KTX). Therefore, on this study will be examined the dynamic capacity and stability of the typical PSC Box Girder of high speed railway bridge. At first, the static/dynamic analysis is performed considering the axle load line of KTX based upon existing references. Additionally, the KTX moving load is transformed into the dynamic time series load for conducting various parameter studies like axle length, analytical time increment, velocity of KTX. The time history analysis is repeatedly performed to get maximum dynamic responce by varying axle load length, analytical time increment, velocity of KTX. The study shows that dynamic analysis has resonable results with optimal axle load length(0.6 m) and time increment(0.01 sec.) and maximum DAF and dynamic resonance happens at 270 km/h velocity of KTX.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권6호
• /
• pp.295-300
• /
• 2003

Voltage instability has been studied for some decade now. But, There is not generally accepted definition of voltage instability because of the complex phenomenon and the variety of ways in which it can manifest itself. Both IEEE and CIGRE have the respective definitions. The areas of voltage instability research are the analysis, simulation and countermeasure of voltage instability. It needs to model the components of the power system to simulate the voltage instability and voltage collapse. At the beginning, the static simulation was used. This method provides the voltage stability indices and it requires less CPU resource and gives much insight into the voltage and power problem. However, it is less accurate than the dynamic simulation peformed in the time domain simulation. So, when it appears difficult to secure the voltage stability margin in a static stability, it is necessary to perform the dynamic simulation. To perform time-domain simulation, we have to model the dynamic component of the power system like a generator and a load. The dynamic simulation provides the accurate result of the voltage instability. But, it is not able to provide the sensitivity information or the degree of stability and it is time consuming and it needs much CPU resource. In this Paper, we perform a dynamic simulation of voltage instability and voltage collapse using EMTP MODELS. The exponential load model is designed with MODEIS and this load model is connected with test power system. The result shows the process of voltage change in time domain when the voltage instability or voltage collapse occurs.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.424-432
• /
• 1989

본 연구에서는 정적절삭실험으로 결정될수 있는 절삭변수로 표현되는 동적 절삭력을 해석적으로 구한다. 이 모델은 3차원 절삭형태에도 적용될 수 있는 특성을 갖는다. 새로이 제안된 절삭 과정의 모델은 동적절삭상태에서 절삭력 합력의 변화를 고려한 절삭기구를 통해 이루어지며, 해석적으로 한계절삭폭을 구한다. 실험적 규명 은 채터진동이 발생하지 않는 한계절삭 공작물에 비해 공구의 강성이 상대적으로 적은 보링(boring)작업에서 발생하는 것을 대상으로 하였다.

• Wind and Structures
• /
• 제31권6호
• /
• pp.509-522
• /
• 2020

Wind load is the principal cause for a large number of the collapse of transmission lines around the world. The transmission line is traditionally designed for wind load according to a linear equivalent method, in which dynamic effects of wind are not appropriately included. Therefore, in the present study, incremental dynamic analysis is utilized to investigate the stability behavior of a 400 kV transmission line under wind load. In that case, the effects of vibration of cables and aerodynamic damping of cables were considered on the stability behavior of the transmission line. Superposition of the harmonic waves method was used to calculate the wind load. The corresponding wind speed to the beginning of the transmission line collapse was determined by incremental dynamic analysis. Also, the effect of the yawed wind was studied to determine the critical attack angle by the incremental dynamic method. The results show the collapse mechanisms of the transmission line and the maximum supportable wind speed, which is predicted 6m/s less than the design wind speed of the studied transmission line. Based on the numerical modeling results, a retrofitting method has been proposed to prevent failure of the tower members under design wind speed.

• 대한물리의학회지
• /
• 제12권1호
• /
• pp.67-74
• /
• 2017

PURPOSE: The purpose of this study was to determine the effect of action observation with observation type on the limits of stability and dynamic gait ability in stroke patients. METHODS: The 20 stroke patients who participated in this study were randomly divided into two experimental groups who underwent training three times a week for 4 weeks. Their balance was tested as the limit of stability with Biorescue. Their Dynamic gait ability was tested with the Dynamic Gait Index (DGI) before the intervention, and after 4 weeks. Independent and paired t-tests were used to analyze the results. RESULTS: The results confirmed the limit of stability on the moving areas of the paralyzed and non-paralyzed sides. The limit of stability and dynamic gait index measurements confirmed that the moving area showed a significant difference after the intervention in the whole movement observation group (p<.05), but the partial movement observation group showed no significant difference (p>.05). A significant difference was also noted for the comparison between the both groups after the interventions (p<.05). The functional walking ability showed a significant difference when compared to the ability before the intervention, as determined by the changes in scores obtained for the dynamic gait index (p<.05). CONCLUSION: Interventions utilizing whole movement confirm that training improves stability and functional walking ability in stroke patients with disabilities in balance and walking ability.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.489-495
• /
• 2007

표준 동역학 모델의 피치 동안정미계수를 측정하기 위한 실험적 연구가 아음속 풍동에서 수행되었다. 모델은 트리거 신호가 주어지면 직류형 서보모터에 의하여 일정한 진폭과 주파수로 상, 하 피치운동을 시작하며, 동시에 25 사이클 동안의 데이터가 자료획득시스템에 저장된다. 동안정미계수 계산에 필요한 위상차는 기준입력 신호와 모델의 무게중심에 장착된 밸런스로부터 나오는 출력신호의 최대 정점과의 위상변화로부터 얻어졌다. 또한 Stabilator의 동안정미계수에 대한 영향은 조종면을 변위시키면서 측정하였다. 본 실험을 위해 독창적으로 제작된 모델의 구동장치 및 실험장치가 다른 연구와 다른데도 불구하고 실험결과는 받음각 변화에 따른 동안정미계수의 변화 경향성이 TPI, NAE, 그리고 FFA의 연구결과와 비교적 잘 일치함을 확인하였다.

• 한국항공우주학회지
• /
• 제40권10호
• /
• pp.888-893
• /
• 2012

본 논문은 유도 무기나 로켓과 같이 세장비가 큰 비행체의 동안정미계수 획득을 위한 풍동실험장치 및 기법에 관하여 기술하였다. 세장비가 큰 로켓과 같은 비행체의 동적운동을 위한 풍동실험은 풍동 시험부의 크기와 진동 장치의 설치에 대한 문제 등의 어려움이 있어 동안정성 실험을 수행하는데 여러 가지 제약이 따르게 된다. 본 연구에서는 아음속 풍동에서 세장비가 큰 비행체의 동안정 미계수 획득을 위한 풍동실험기법으로 동안정 밸런스를 이용하는 기법이 사용되었다. 본 연구를 통하여 세장비가 큰 비행체의 자유진동 풍동실험 장치가 구축되었으며, 이 장치를 이용한 자료측정 결과는 동안정미계수가 적절하게 획득됨을 보여 주었다.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.451-456
• /
• 2009

Through the development of phasor measurement units (PMU), various aspects of power system dynamic behavior could be monitored and diagnosed. Monitoring dynamic voltage stability has become one of the achievements we can obtain from PMUs. It is very important to select the most appropriate method for the Korea Electric Power Corporation (KEPCO) system since there are many voltage stability indices. In this paper, we propose an advanced WAVI (Wide Area Voltage Stability) that is well suited for the purposes of monitoring the dynamic voltage stability of KEPCO's PMU installation plan. The salient features of the proposed index are: i) it uses only PMU measurements without coupling with EMS data; ii) it is computationally unburdened and can be applied to real-time situations. The proposed index is applied to the KEPCO test system and the results show that it successfully predicts voltage instability through comparative studies.