• 한국터널지하공간학회 논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

본 연구에서는 터널 내 콘크리트 도상을 모사하여 현장실험을 수행하였다 그리고 도시철도터널 내 콘크리트도상의 반사소음을 저감하기 위한 다중국소공명 흡음판의 이론적 평가항목과 한계를 고려하여 허용한계를 연구하였다. 본 연구결과는 도시철도 터널 구간에서의 차량 주행속도에 따른 유동 영향에 의한 흡음판의 흡음계수를 분석하고, 구조안정성을 효율적으로 평가할 수 있는 최대 변위와 변위가 속도 및 동적특성인 감쇠비와 고유진동수를 효과적으로 도출할 수 있는 계측시스템을 제안한다.

• 한국식품과학회지
• /
• 제19권3호
• /
• pp.200-205
• /
• 1987

마이크로 컴퓨터 계측 및 제어 시스템을 설계 제작하여 프로그램에 의해 온도 및 무게를 자동(自動) 측정(測定)하고 on-off작동(作動)에 의한 온도 제어와 D/A변환기(變換機)를 부착(附着)한 접속장치(接續裝置)로 풍량을 필요에 따라 자동 제어할 수 있었다. 건조 실험에 관여하는 변수들의 기록과 분석을 컴퓨터화 함으로써 수분감량(水分減量)을 일일이 칭칭량법(稱量法)으로 측정하 는번거로움과 시간을 절약할 수 있었다. 더욱이 계측(計側) 과정에서 건조계(乾燥系)를 전혀 흐트려뜨리지 않게 함으로써 건조가 완료될 때까지 건조환경을 그대로 유지할 수 있었고 자료의 채취시간도 프로그램을 통하여 임의(任意)로 설정하여 조절(調節)할 수 있어 건조실험을 완전 자동화할 수 있었다. 또한 건조 진행중에 software적으로 풍속을 변화시켜 건조를 행한 결과 건조 초기에는 풍속이 건조속도에 크게 영향을 미치나 건조 말기에는 영향이 적었다.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1492-1501
• /
• 2011

A wide-area protection intelligent technique has been used to improve a reliability in power systems and to prevent a blackout. Nowadays, voltage and current phasor estimation has been executed by GPS-based synchronized PMU, which has become an important way of wide-area blackout protection for the prevention of expending faults in power systems. As this technique has the difficulties in collecting and sharing of information, there have been used a FNET method for the wide-area intelligent protection. This technique is very useful for the prediction of the inception fault and for the prevention of fault propagation with accurate monitoring frequency and frequency deviation. It consists of FDRs and IMS. It is well known that FNET can detect the dynamic behavior of system and obtain the real-time frequency information. Therefore, FDRs must adopt a optimal frequency estimation method that is robust to noise and fault. In this paper, we present comparative studies for the frequency estimation method using IRDWT(improved recursive discrete wavelet transform), for the frequency estimation method using FRDWT(fast recursive discrete wavelet transform). we used the Republic of Korea 345kV power system modeling data by EMTP-RV. The user-defined arbitrary waveforms were used in order to evaluate the performance of the proposed two kinds of RDWT. Also, the frequency variation data in various range, both large range and small range, were used for simulation. The simulation results showed that the proposed frequency estimation technique using FRDWT can be the optimal frequency measurement method applied to FDRs.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1343-1347
• /
• 2013

This paper presents an analysis methods for current collection quality in catenary system by means of video image based monitoring system. Arcing is the sparking at the interface point between pantograph and contact wire when the electric trains have traction current values at speed. Percentage of arcing at maximum line speed is measurable parameters for compliance with the requirements on dynamic behaviour of the interface between pantograph and contact wire in accordance with requirement of IEC and EN standards. The arc detector and video is installed on a train aim at the trailing contact strip according to the travel direction. The arc detector presented and measured verity of value such as the duration and power density of each arc and the video image is measured a image when the arc is occurred in pantograph. In this paper we analysis of video image in accordance with power density of arcing from arc detector and compared with video image and power density of arcing so as to produce quality of arcing from image.

• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1397-1399
• /
• 2003

When and Where, What kind of agricultural products will be produced and provided for the market? It is a commercial requirement, and also an academic questions to remote sensing technology. Crop physiology analysis and growth monitoring are important elements for precision agriculture management. Remote sensing technology supplies us more selections and available spaces in this dynamic change study by producing images of different spatial, spectral and temporal resolutions. Especially, the hyperspectral remote sensing should do play a key role in crop growth investigation at national, regional and global scales. In the past five years, Chinese academy of sciences and Japan NTT-DATA have made great efforts to establish a prototype information service system to dynamically survey the vegetable planting situation in Nagano area of Japan mainly based on remote sensing data. For such concern, a flexible and light-duty flight system and some practical data processing system and some necessary background information should be rationally made together. In addition, some studies are also important, such as quick pre-processing for hyperspectral data, Multi-temporal vegetation index analysis, hyperspectral image classification in support of GIS data, etc. In this paper, several spectral data analysis models and a designed airborne platform are provided and discussed here.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.72-80
• /
• 2019

In this task, the tool dynamometer design and manufacture, and the Ansys S/W structural analysis program for tool attachment that satisfies the cutting force measurement requirements of the tool dynamometer system are used to determine the cutting force generated by metal cutting using 3-axis static structural analysis and the LabVIEW system. The cutting power in a cutting process using a milling tool for processing metals provides useful information for understanding the processing, optimization, tool status monitoring, and tool design. Thus, various methods of measuring cutting power have been proposed. The device consists of a strain-gauge-based sensor fitted to a new design force sensing element, which is then placed in a force reduction. The force-sensing element is designed as a symmetrical cross beam with four arms of a rectangular parallel line. Furthermore, data duplication is eliminated by the appropriate setting the strain gauge attachment position and the construction of a suitable Wheatstone full-bridge circuit. This device is intended for use with rotating spindles such as milling tools. Verification and machining tests were performed to determine the static and dynamic characteristics of the tool dynamometer. The verification tests were performed by analyzing the difference between strain data measured by weight and that derived by theoretical calculations. Processing test was performed by attaching a tool dynamometer to the MCT to analyze data generated by the measuring equipment during machining. To maintain high productivity and precision, the system monitors and suppresses process disturbances such as chatter vibration, imbalances, overload, collision, forced vibration due to tool failure, and excessive tool wear; additionally, a tool dynamometer with a high signal-to-noise ratio is provided.

• 대한간호학회지
• /
• 제49권4호
• /
• pp.398-410
• /
• 2019

Purpose: This study used a system dynamics methodology to identify correlation and nonlinear feedback structures among factors affecting adolescent cyberbullying victims (CV) in Korea and to construct and verify a simulation model. Methods: Factors affecting CV were identified by reviewing a theoretical background in existing literature and referencing various statistical data. Related variables were identified through content validity verification by an expert group, after which a causal loop diagram (CLD) was constructed based on the variables. A stock-flow diagram (SFD) using Vensim Professional 7.3 was used to establish a CV model. Results: Based on the literature review and expert verification, 22 variables associated with CV were identified and the CLD was prepared. Next, a model was developed by converting the CLD to an SFD. The simulation results showed that the variables such as negative emotions, stress levels, high levels of conflict in schools, parental monitoring, and time spent using new media had the strongest effects on CV. The model's validity was verified using equation check, sensitivity analysis for timestep and simulation with 4 CV adolescent. Conclusion: The system dynamics model constructed in this study can be used to develop intervention strategies in schools that are focused on counseling that can prevent cyberbullying and assist in the victims' recovery by formulating a feedback structure and capturing the dynamic changes observed in CV. To prevent cyberbullying, it is necessary to develop more effective strategies such as prevention education, counseling and treatment that considers factors pertaining to the individual, family, school, and media.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.321-327
• /
• 2017

China is experiencing the urbanization at an unprecedented speed and scale in human history. The continuing growth of China's big cities, both in city land and population, has already led to great challenges in China's urban planning and construction activities, such as the continuous increase of construction and demolition (C&D) waste. Therefore, how to characterize cities' construction activities, particularly dynamically quantify the flows of building materials and construction debris, has become a pressing problem to alleviate the current shortage of resources and realize urban sustainable development. Accordingly, this study is designed to employ 4D-GIS (four dimensions-Geographic Information System) and Internet Plus to offer new approach for accurate but dynamic C&D waste management. The present study established a spatio-temporal pattern and material metabolism evolution model to characterize the geo-distribution of C&D waste by combing material flow analysis (MFA) and 4D-GIS. In addition, this study developed a mobile application (APP) for C&D waste trading and information management, which could be more effective for stakeholders to obtain useful information. Moreover, a cloud database was built in the APP to disclose the flows of C&D waste by the monitoring information from vehicles at regional level. To summarize, these findings could provide basic data and management methods for the supply and reverse supply of building materials. Meanwhile, the methodologies are practical to C&D waste management and beyond.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.86-92
• /
• 2022

최근 COVID-19 팬데믹 등 다양한 이유로 인해 바이오 헬스케어 시장이 전세계적으로 활성화되고 있다. 그 중, 생체정보 측정 및 분석 기술은 앞으로의 기술적 혁신성과 사회경제적 파급효과를 불러일으킬 것으로 예측된다. 기존의 시스템은 생체 신호를 받아 신호 처리를 하는 과정에서 신호 송×수신부, 운영체제, 센서, 그리고 인터페이스를 구동하기 위한 대용량 배터리를 필수적으로 요구한다. 하지만, 배터리 용량의 한계가 인해 시×공간적인 기기 사용의 제한을 야기하며, 이는 사용자의 헬스케어 모니터링에 필요한 데이터의 단절에 대한 원인으로 작용할 수 있으므로 헬스케어 디바이스의 큰 걸림돌 중의 하나이다. 본 연구에서는 생체정보 측정 장치에 접촉대전 효과(Triboelectric effects)와 전자기유도 효과(Electro-magnetic effects)를 융합하여, 외부 전원을 요구하지 않는 독립 구동이 가능한 시스템을 구성하여 시×공간적으로 사용 제한이 없는 소형 생체정보 측정 모듈을 설계 및 검증했다. 특히, 다양한 헬스케어 모니터링 중 족압 계측을 통해 사용자의 보행 습관 등을 파악할 수 있는 무선 족압 계측 모니터링 시스템을 검증했다. 보행 시 발생하는 접촉×분리 움직임에서 접촉대전 효과를 이용한 효과적인 압력 센서와 압력에 따른 전기적 출력신호를 통해 족압 센서를 만들고, 축전기를 이용한 신호처리 회로를 통해 이의 동적 거동을 계측할 수 있다. 또한, 출력된 전기신호의 무선 송×수신용 전원으로 사용하기 위해 전자기 유도 효과를 이용하여 보행 시 생기는 생체역학적 에너지를 전기에너지로 수확했다. 따라서, 이번 연구는 사용자가 제한적인 배터리 용량 때문에 생기는 충전에 대한 불편함을 줄일 수 있고, 뿐만 아니라 데이터 단절에 대한 문제점을 극복할 수 있는 방법으로서 큰 잠재력을 보여줌을 시사한다.