• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.250-256
• /
• 2010

본 연구에서는 차량-교량간의 상호작용 효과가 교량의 동적거동에 미치는 영향을 분석하기 위하여 실험적 연구를 수행하였다. 이를 위하여 차량-교량 간 상호작용이 가능하도록 윤하중 실험 장치를 개발하여 단순교량 형식의 교량을 대상으로 이동 질량 실험을 수행하였다. 이동질량 이론을 이용한 해석 결과와 이동질량 실험의 결과를 상호분석하여 각각의 합리성을 검증하였다. 수행된 실험의 결과를 분석하여 개발된 윤하중 시험기는 차량-교량 간 상호작용에 의한 교량의 동적 거동을 재현할 수 있음을 알았다. 아울러 이동질량 실험의 결과를 분석하여 차량-교량 간 상호작용이 교량의 동적거동에 미치는 영향을 분석할 수 있었다.

• 한국재난정보학회 논문집
• /
• 제7권3호
• /
• pp.198-205
• /
• 2011

본 연구에서는 차량-교량 간 상호작용효과가 교량의 동적거동에 미치는 영향을 분석하기 위한 실험적 연구를 수행하였다. 이를 위하여 차량 교량 간 상호작용이 포함된 이동 질량 형 윤하중 시험기를 조립식 프리캐스트 패널형식의 단순교량에 적용하여 이동질량 반복주행실험을 수행하였다. 실험분석 결과 차량-교량 간 상호 작용은 교량의 동적거동에 예측 가능한 거동뿐 아니라 상반거동 및 반전현상 등의 추가적인 다양한 거동을 발생시킴을 알 수 있었다.

• Smart Structures and Systems
• /
• 제31권5호
• /
• pp.501-516
• /
• 2023

Dynamic irregularity and acceleration of bridges subjected to high-speed trains provide crucial information for comprehensive evaluation of the health state of under-track structures. This paper proposes a novel approach for real-time estimation of vertical track dynamic irregularity and bridge acceleration using deep generative adversarial network (GAN) and vibration data from in-service train. The vehicle-body and bogie acceleration responses are correlated with the two target variables by modeling train-bridge interaction (TBI) through least squares generative adversarial network (LSGAN). To realize supervised learning required in the present task, the conventional LSGAN is modified by implementing new loss function and linear activation function. The proposed approach can offer pointwise and accurate estimates of track dynamic irregularity and bridge acceleration, allowing frequent inspection of high-speed railway (HSR) bridges in an economical way. Thanks to its applicability in scenarios of high noise level and critical resonance condition, the proposed approach has a promising prospect in engineering applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.414-421
• /
• 1999

In this paper, the simplified method for 2-dimensional train/track/bridge interaction analysis is utilized in the analysis of dynamic behavior of bridges in which the eccentricity of axle loads and the effect of the toriosnal forces acting on the bridge are included for the more accurate train/track/bridge interaction analysis. Inverstigations mainly into the influence of vehicle speed on train/track/bridge interactions are carried out for the two cases. The first case is that only train and bridge are considered in the modelling and the other case is that train, track and bridge are considered.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.273-289
• /
• 2011

The vibration response of the bridges under the moving vehicular load is of importance for engineers to estimate the serviceability of existing bridges and to design new bridges. This paper deals with the three dimensional vibration analysis of prestressed concrete bridges under moving vehicles. The prestressed bridges are modeled by four-node isoparametric flat shell elements with the transverse shearing deformation taken into account. The usual five degrees-of-freedom (DOFs) per node of the element are appended with a drilling DOF to accommodate the transformation of the local stiffness and mass matrices to the global coordinates. The vehicle is modeled as a single or two-DOF system. A single-span prestressed Tee beam and two-span prestressed box-girder bridge are studied as the two numerical examples. The effects of prestress forces on the natural frequencies and dynamic responses of the bridges are investigated.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.333-342
• /
• 2010

The Pseudo-Excitation Method (PEM) is applied to study the stochastic space vibration responses of train-bridge coupling system. Each vehicle is modeled as a four-wheel mass-spring-damper system with two layers of suspension system possessing 15 degrees-of- freedom. The bridge is modeled as a spatial beam element, and the track irregularity is assumed to be a uniform random process. The motion equations of the vehicle system are established based on the d'Alembertian principle, and the motion equations of the bridge system are established based on the Hamilton variational principle. Separate iteration is applied in the solution of equations. Comparisons with the Monte Carlo simulations show the effectiveness and satisfactory accuracy of the proposed method. The PSD of the 3-span simply-supported girder bridge responses, vehicle responses and wheel/rail forces are obtained. Based on the $3{\sigma}$ rule for Gaussian stochastic processes, the maximum responses of the coupling system are suggested.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.711-720
• /
• 2002

본 연구에서는 곡선교에서 주행차량에 의한 동적 응답을 보다 정밀하게 구현할 수 있는 3차원 해석 모형을 개발하였다. 원심력에 의한 차량의 롤링운동에 따른 차량의 쏠림현상을 구현하여 곡선교의 대표적인 응답특성인 편경사와 곡률반경에 따른 동적응답과 받침의 변화에 따른 동적 응답 특성을 규명하였으며, 2가지 지점조건에 대하여 주행차량에 의한 곡선교의 동적 특성을 비교 분석하였다. 또한 이와 함께 곡선교에서 어떤 파라미터가 하중 분배에 가장 효율적인가를 비교 분석하였다. 동적해석결과 받침이 외측에 배치된 경우가 중앙에 배치된 경우보다 더 유리하게 분석되었으며, 여러 가지 조건에 따라 하중분배 특성이 다르게 나타남을 알 수 있었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.360-367
• /
• 2003

This paper presents passive vibration control method to suppress train-induced vibration on a long-span steel arch bridge. According to the train load frequency analysis, undesirable resonance of a bridge will occur when the impact frequency of the train axles are close to the modal frequencies of the bridge. Because the first mode shape of the long-span steel arch bridge may take anti-symmetric shape along the bridge direction, however, the optimal control configuration for resonance suppression should be considered carefully In this study, bridge-vehicle element is used to estimate the bridge-train interaction precisely. From the numerical simulation of a loom steel arch bridge under TGV-K train loading, dynamic magnification influences are evaluated according to vehicle moving speed and efficient control system with passive dampers are presented in order to diminish the vertical displacement and vertical acceleration.

• Wind and Structures
• /
• 제23권1호
• /
• pp.19-43
• /
• 2016

In the present study, a new methodology is presented to study the ride comfort and bridge responses of a long-span bridge-traffic-wind coupled vibration system considering stochastic characteristics of traffic flow and bridge surface progressive deterioration. A three-dimensional vehicle model with 24 degrees-of-freedoms (DOFs) including a three-dimensional non-linear suspension seat model and the longitudinal vibration of the vehicle is firstly presented to study the ride comfort. An improved cellular automaton (CA) model considering the influence of the next-nearest neighbor vehicles and a progressive deterioration model for bridge surface roughness are firstly introduced. Based on the equivalent dynamic vehicle model approach, the bridge-traffic-wind coupled equations are established by combining the equations of motion of both the bridge and vehicles in traffic using the displacement relationship and interaction force relationship at the patch contact. The numerical simulations show that the proposed method can simulate rationally the ride comfort and bridge responses of the bridge-traffic-wind coupled system; and the vertical, lateral, and longitudinal vibrations of the driver seat model can affect significantly the driver's comfort, as expected.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.256-263
• /
• 2002

This paper deal with optimal design of reinforced track as a track reinforcing method for transition area of track support stiffness in transition area between bridge and earthwork. When vehicle passes through transition area, dynamic properties between vehicle and track are studied by the analysis of vehicle-train interaction for the each case when reinforced tracks are used or not. furthermore, optimum decision of type and length of track are made based on the performance adapting variable parameters : support stiffness of track for bridge and earthwork, heading direction of vehicle and type and length of track.