• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.121-127
• /
• 2020

In this paper, we propose a dynamic spectrum hole grouping method that changes the grouping range of spectrum hole according to the resources amount required by secondary users in wideband spectrum cognitive wireless networks, and then the proposed method is applied to channel allocation for the secondary user service. The proposed method can improve waste of resources in the existing static spectrum hole grouping in virtue of grouping dynamically as much the predicted spectrum holes resources as secondary users require. Simulation results show that channel allocation method with the proposed dynamic grouping outperforms that with the static grouping method in resources utilization under acceptable secondary user service performance.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.219-225
• /
• 2022

In this paper, we propose a CAC exploring a RA based dynamic spectrum hole grouping for secondary users' QoS enhancement in multi-classes cognitive radio networks. The RA based dynamic spectrum hole grouping uses SU multi-classes overlaying spectrum structure suggested here. Multiclass SUs are divided into real and non real, and real SUs have a priority for resource utilization against non real. The amount of resource required by real SUs is supported by Wiener prediction and the dynamic spectrum hole grouping, and that required by non real SU is supported by the remained available amount without prediction. In the simulations, we compare the proposed CAC performances using the dynamic spectrum hole grouping in terms of SU connection's blocking(dropping) rate and resource utilization efficiency according to multi-classes traffic characteristics, and then we show the proposed CAC can guarantee the desired QoS of multi-classes secondary users.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1318-1326
• /
• 2020

Structural modification in the electrical cabinet is investigated by a proposed procedure that comprises of an experimental, analytical and numerical solution. This research emphasizes the linear dynamic analysis of the cabinet that is studied under the seismic excitation to demonstrate the real behavior of the cabinets in NPP. To this end, an actual electric cabinet is experimentally tested using an impact hammer test which reveals the fundamental parameters of the cabinet. The Frequency-domain decomposition (FDD) method is used to extract the dynamic properties of the cabinet from the experiment which is then used for numerical modeling. To validate the dynamic properties of the cabinet an analytical solution is suggested. The calibrated model is analyzed under the floor response obtained from the Connecticut nuclear power plant structure excited by Tabas 1978 (Mw 7.4) earthquake. Eventually, the grouping effect of the cabinets is proposed which represents the influence on the dynamic modification. This grouping of the cabinets is described more sophisticatedly by the theoretical understating, which results in a significant change in the seismic response. Considering the grouping effects will be helpful in the assessment of the real seismic behavior, design, and performance of cabinets.

• IE interfaces
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

The mobile communication network has to offer good quality of services (QoS), high capacity, and more coverage at a lower cost. However, with the increase of cellular user, the shortage of capacity due to unbalanced call distribution and lack of QoS are common. This paper deals with dynamic sectorization for efficient resource management to solve load unbalancing among microcells in CDMA (Code Division Multiple Access) microcellular system. Dynamic load balancing can be effected by grouping micro-cells properly and grouping can be developed through a routing mechanism. Therefore, we use ants and their routes to choose the optimum grouping of micro-cells into sectors using Multiple Ant Colony System (MACS)in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2480-2495
• /
• 2014

This paper describes a hierarchical method for image-based age estimation that combines age group classification and age value estimation. The proposed method uses a coarse-to-fine strategy with different appearance features to describe facial shape and texture. Considering the damage to continuity between neighboring groups caused by fixed divisions during age group classification, a dynamic grouping technique is employed to allow non-fixed groups. Based on the given group, an ordinal hyperplane ranking (OHRank) model is employed to transform age estimation into a series of binary enquiry problems that can take advantage of the intrinsic correlation and ordinal information of age. A set of experiments on FG-NET are presented and the results demonstrate the validity of our solution.

• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.7-13
• /
• 2017

In this paper, we propose a novel dynamic subchannel grouping (DSG) algorithm to maximize the system capacity considering intended proper outage probability for the downlink of enterprise small-cell networks (ESNs). In the proposed DSG scheme, a local gateway (LGW) which is installed in a building dynamically divides the frequency bandwidth into different numbers of subchannel groups (SGs) based on the numbers of small-cell access points (SAPs) and small-cell user equipments (SUEs) per floor. Then, the LGW assigns the SGs to SAPs and the SAPs allocate them to their serving SUEs. Through simulation results, we show that the proposed DSG scheme is appropriate for the ESNs compared to the conventional small-cell networks in which all SAPs use the number of fixed SGs in terms of the system capacity and outage probability.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1099-1103
• /
• 2018

Platooning of vehicles is an efficient traffic management model that improves traffic flow and fuel consumption. Especially, it is necessary to reduce computational load and networking overhead in automated connected vehicle systems. Because it is important to maintain the size of the platoon group appropriately for efficient platoon operation, this study proposed a dynamic grouping scheme for platooning in an automated vehicle system. The proposed scheme is analyzed by a mathematical model based on Markov chain. From the performance evaluation, it was confirmed that the proposed scheme appropriately controls the size of the platoon group.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1200-1201
• /
• 2010

인터넷 및 서비스 환경의 발전으로 인해 컴퓨터 통신의 환경이 변함에 따라 기존의 유니캐스트 전송방식에서 멀티캐스트 전송 방식을 이용한 그룹 통신이 증가하고 있다. 그러나 멀티캐스트 전송 방식의 취약점 및 키 관리의 어려움으로 인해 많은 문제점이 발생하면서 멀티캐스트 환경에서 안전하고 효율적인 키 관리 방법에 대한 연구의 필요성이 대두되고 있다. 따라서 본 연구에서는 멀티캐스트 환경에서 dynamic grouping을 이용한 키 관리 프로토콜을 제안하여 안전성과 효율성을 제공하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.794-799
• /
• 2005

The failure of blades frequently happened in the 300MW LP turbine until now and they are maintaining the blades periodically during outage. So the blade-disk system is analysed by FEM in order to identify the main cause of failure of blade row. It is found that the stress of root's hole is highest in comparison with other parts from the result of the steady stress analysis. Also, the two dangerous frequencies which is related to the resonance condition are found in the interference diagram. one is 1,516 Hz which is related to the operating speed. The other is 2,981 Hz which is related to the 1 nozzle passing frequency. The dynamic stress analysis is per-formed to identify more accurate root cause for failure of blade row. It is confirmed that the dynamic stress of the latter is higher than one of the former. From these results, it is concluded that the former has deeply something to do with the failure of blades more than the latter. Based on versatile investigation and deliberation, the change of blade's grouping is determined to avoid the resonance condition with the operating speed. After the blade grouping is changed, the former frequency vanish completely but the latter is still in existence in the interference diagram. Fortunately, It is confirmed that the dynamic stress of the new blade grouping is lower than one of the old blade grouping. 2 years has passed since modification and the LP turbine is operated well without failure so far.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1100-1107
• /
• 2005

The failure of blades frequently happened in the 300 MW LP(low pressure) turbine until now and they are maintaining the blades periodically during outage. So the blade-disk system is analysed by FEM in order to identify the main cause of failure of blade row. It is found that the stress of root's hole is highest in comparison with other parts from the result of the steady stress analysis. Also, the two dangerous frequencies which is related to the resonance condition are found in the interference diagram. One is 1,316 Hz. The other is 2,981 Hz which is related to the 1 nozzle passing frequency. The dynamic stress analysis is performed to identify more accurate root cause for failure of blade row It is confirmed that the dynamic stress of the former is higher than one of the latter From these results, it is concluded that the former has deeply something to do with the failure of blades more than the tatter. Based on versatile investigation and deliberation, the change of blade's grouping is determined to avoid the resonance condition with the operating speed. After the blade grouping is changed, the former frequency vanish completely but the latter is still in existence in the interference diagram. Fortunately, It is confirmed that the dynamic stress of the new blade grouping is lower than one of the old blade grouping. 2 years has passed since modification and the LP turbine is operated well without failure so far.