• 한국공간구조학회논문집
• /
• 제13권3호
• /
• pp.65-72
• /
• 2013

Long span arch structure is composed of arch as relatively flexible structure and column as relatively rigid structure. In this study, the characteristic of dynamic response is analyzed according to the natural frequency ratio between arch and columns. The result of analysis for arch as relatively vertical vibration mode is dominant, the influence of columns mainly appears at relatively high frequency band according to increase of 1st mode frequency in column. However, the dynamic characteristic of arch structure is expected to vary with not only frequency ratio but interaction between vibration modes of arch and columns.

• 연구논문집
• /
• 통권24호
• /
• pp.97-106
• /
• 1994

Steering system is typically one of the vehicle parts that may injure an unrestrained driver in a frontal collision. Therefore, the engineers of vehicle safety parts researched the allowable injury criteria such as HIC(head injury criterion). chest acceleration and knee impact force. From their research, they recognized that development of energy absorbing steering system was necessary to protect the driver. Energy absorbing parts of steering system consist of shear capsule, ball sleeve and shaft assembly. We performed the modelling and dynamic analysis of the energy absorbing steering column with the unrestrained driver model. The conclusions of this study are as follows. 1) The variation of column angle has an important effects on the dynamic responses of steering system and driver behavior. 2) The energy absorbing steering system satisfies the safety criterion of FMVSS 203, 208, but not the safety criterion of FMVSS 204.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.596-602
• /
• 2010

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.617-624
• /
• 2017

In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.291-298
• /
• 2003

The resonant column testing is a laboratory testing method to determine the shear modulus and the material damping factor of soils. The method has been widely used for many applications and its importance has been increased. Since the establishment of the testing method in 1963, the low-technology electronic devices for testing and data acquisition have limited the measurement to the amplitude of the linear spectrum. The limitations of the testing method were also attributed to the assumption of the linear-elastic material in the theory of the resonant column testing and to the use of the wave equation for the dynamic response of the specimen. For the better theoretical formulation of the resonant column testing, this study derived the equation of motion and provided its solution. This study also proposed the improved data reduction and analysis method for the resonant column testing, based on the advanced data acquisition system and the proposed theoretical solution for the resonant column testing system. For the verification of the proposed data reduction and analysis method, the numerical simulation of the resonant column testing was performed by the finite element analysis. Also, a series of resonant column testing were peformed for Joomunjin sand, which verified the feasibility, of the proposed method and showed the limitations of the conventional data reduction and analysis method.

• 대한토목학회논문집
• /
• 제31권1A호
• /
• pp.1-7
• /
• 2011

이 연구는 일정표면적 기둥의 좌굴하중에 관한 연구이다. 기둥단면의 변화깊이의 형상함수로는 선형 변단면을 채택하였다. 이러한 기둥의 좌굴형상을 지배하는 상미분방정식을 유도하기 위하여 축방향 압축력을 받는 기둥의 동적 평형방정식을 이용하였다. 수치해석 예에서는 회전-회전, 회전-고정, 고정-고정의 지점조건을 고려하였다. 수치해석의 결과로 각종 기둥변수들이 좌굴하중에 미치는 영향을 분석하였다. 특히, 일정표면적으로부터 최대 좌굴하중을 발생시킬 수 있는 기둥의 최강단면비와 그에 대응하는 최강좌굴하중을 산정하였다. 기둥 축에 횡방향 내부지점을 설치하여 좌굴하중을 증가시킬 수 있는 무변위 위치를 찾기 위하여 기둥의 좌굴형상을 산출하였다.

• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.87-96
• /
• 1995

A new fungivle material named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic charateristics comparing with a conventional cast iron material. The dimensions of new column structure are adjusted to keep the same stiffness (EI value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up, one of which is for the measurement of natural mode and frequency using experimental modal analysis, and the other one is for the measurement of vibration amplitude during idling operation of a machine tool. The comparison of maximum accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measrued on the bed, motor base, and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite material exhibits a good anti- vibrational propderty even if it is used under the actual operational environments of machine tool as a practical structural element.

• Computers and Concrete
• /
• 제7권6호
• /
• pp.523-532
• /
• 2010

If an infill wall in a reinforced concrete frame is shorter than the column height and there is no initial gap between the column and the infill wall, the short column effect can occur during an earthquake shaking. This form of damage is frequently observed in many earthquake-damaged buildings all around the world and especially in Turkey. In this study, an effective method, which consists of placing additional infill wall segments surrounding the short column, to prevent this type of failure is examined. The influence of adding infill wall in the reduction of the shear force in the short column is also investigated. A parametric study is carried out for one-storey infilled frames with one to five bays using the percentage of the additional infill wall surrounding the short column and the number of spans as the parameters. Then the investigation is extended to a case of a multistorey building damaged due to short column effect during the 1998 Adana-Ceyhan earthquake in Turkey. The results show that the addition of the infill walls around the potential short columns is an effective way to significantly reduce the shear force.

• 한국정보전자통신기술학회논문지
• /
• 제13권1호
• /
• pp.8-16
• /
• 2020

본 논문에서는 polymerase chain reaction (PCR) 응용에 적합한 저잡음 CMOS 이미지 센서에 사용되는 컬럼-패러럴 analog-to-digital converter (ADC) 어레이를 위한 cascaded-of-integrator feedforward (CIFF) 구조의 단일 비트 2차 델타-시그마 모듈레이터를 제안하였다. 제안된 모듈레이터는 CMOS 이미지 센서에 입사된 빛의 신호에 해당하는 픽셀 출력 전압을 디지털 신호로 변환시키는 컬럼-패러럴 ADC 어레이를 위해 하나의 픽셀 폭과 동일한 10㎛ 컬럼 폭 내에 2개의 스위치드 커패시터 적분기와 단일 비트 비교기로 구현하였다. 또한, 모든 컬럼의 모듈레이터를 동시에 구동하기 위한 주변 회로인 비중첩 클록 발생기 및 바이어스 회로를 구성하였다. 제안된 델타-시그마 모듈레이터는 110nm CMOS 공정으로 구현하였으며 12kHz 대역폭에 대해 418의 oversampling ratio (OSR)로 88.1dB의 signal-to-noise-and-distortion ratio (SNDR), 88.6dB의 spurious-free dynamic range (SFDR) 및 14.3비트의 effective-number-of-bits (ENOB)을 달성하였다. 델타 시그마 모듈레이터의 면적 및 전력 소비는 각각 970×10 ㎛2 및 248㎼이다.

• Smart Structures and Systems
• /
• 제14권3호
• /
• pp.445-468
• /
• 2014

The objective in this research is to determine the feasibility of using changes on the dynamic properties of a reinforced concrete (RC) structure to identify different levels of seismic induced damage. Damping ratio and natural frequency changes in a RC bridge column are analyzed using different signal processing techniques like Hilbert Transforms, Random Decrement and Wavelet Transforms. The data used in the analysis was recorded during a full-scale RC bridge column shake table test. The structure was subjected to ten earthquake excitations that induced different levels of inelastic demand on the column. In addition, low-intensity white noises were applied to the column in-between earthquakes. The results obtained show that the use of the damping ratio and natural frequency of vibration as damage indicators is arguable.