• 대한물리의학회지
• /
• 제10권3호
• /
• pp.87-93
• /
• 2015

PURPOSE: The purpose of this study was to investigate the effects of the 8.5seconds cut-off of the 8-foot up-and-go test as a predictor of falling and a good discriminator of fallers and non-fallers in women in their 60s to 80s. METHODS: The final subjects of this study were 98 elderly women from six senior centers of B metropolitan city. The 8-foot up-and-go test evaluated agility and dynamic balance. The chair-stand test measured the muscle strength for of the lower body. Ankle dorsiflexion and plantar flexion were measured to assess the ankle mobility of the subjects in this study. RESULTS: The below 8.5seconds group showed significantly low values in age and high values in chair-stand (times/30 s), plantar flexion ($^{\circ}$), and K-MMSE (score) compared to the over 8.5seconds group. This group was significantly faster compared to the over 8.5seconds group. In the below 8.5seconds group, only plantar flexion ($^{\circ}$) of all the items showed significantly higher values among those in their 60s compared to those in their 70s and 80s. CONCLUSION: The 8.5seconds cut-off on the 8-foot up-and-go test as a good discriminator and predictor of falling showed differences among fall risk factors (age, lower extremity strength, cognition, and ankle mobility) in women in their 60s to 80s without having regular exercise and a fall experience over the past ones year.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4228-4247
• /
• 2018

Many methods have been developed for the vehicles to create clusters in vehicular ad hoc networks (VANETs). Usually, nodes are vehicles in the VANETs, and they are dynamic in nature. Clusters of vehicles are made for making the communication between the network nodes. Cluster Heads (CHs) are selected in each cluster for managing the whole cluster. This CH maintains the communication in the same cluster and with outside the other cluster. The lifetime of the cluster should be longer for increasing the performance of the network. Meanwhile, lesser the CH's in the network also lead to efficient communication in the VANETs. In this paper, a novel algorithm for clustering which is based on the social behavior of Gray Wolf Optimization (GWO) for VANET named as Intelligent Clustering using Gray Wolf Optimization (ICGWO) is proposed. This clustering based algorithm provides the optimized solution for smooth and robust communication in the VANETs. The key parameters of proposed algorithm are grid size, load balance factor (LBF), the speed of the nodes, directions and transmission range. The ICGWO is compared with the well-known meta-heuristics, Multi-Objective Particle Swarm Optimization (MOPSO) and Comprehensive Learning Particle Swarm Optimization (CLPSO) for clustering in VANETs. Experiments are performed by varying the key parameters of the ICGWO, for measuring the effectiveness of the proposed algorithm. These parameters include grid sizes, transmission ranges, and a number of nodes. The effectiveness of the proposed algorithm is evaluated in terms of optimization of number of cluster with respect to transmission range, grid size and number of nodes. ICGWO selects the 10% of the nodes as CHs where as CLPSO and MOPSO selects the 13% and 14% respectively.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.31-38
• /
• 2009

This study was conducted to forecast inner water temperature strata change by extracting deep water from a dam. For the methodology, the scope wherein the balance between the volume of low-temperature water intake through the virtual water intake opening as installed within the stored water area and the volume of water intake from the surrounding area is not destroyed was calculated through the CFD simulation technique using the computational fluid dynamics(CFD) interpretation method. This study suggested a supplementary method(diffuser) to avoid destroying the water temperature strata, and the effect was reviewed. In case of intake of the same volume, when the velocity of flow of water intake is reduced by increasing the pipe diameter, the destruction of water temperature strata can be minimized. When the area(height) where the intake of water is possible is low, a diffuser for interrupting the vertical direction inflow should be installed to secure favorable water intake conditions in case of water intake on the upper part. This study showed that there was no problem if the intake-enabled, low-temperature area was secured approximately 10m from the bottom when the scope that does not destroy the water temperature strata in case of water intake was forecast using the regression formula.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.859-869
• /
• 2016

Component-scale modeling of boiling is predominantly based on the Eulerian-Eulerian two-fluid approach. Within this framework, wall boiling is accounted for via the Rensselaer Polytechnic Institute (RPI) model and, within this model, the bubble is characterized using three main parameters: departure diameter (D), nucleation site density (N), and departure frequency (f). Typically, the magnitudes of these three parameters are obtained from empirical correlations. However, in recent years, efforts have been directed toward mechanistic modeling of the boiling process. Of the three parameters mentioned above, the departure diameter (D) is least affected by the intrinsic uncertainties of the nucleate boiling process. This feature, along with its prominence within the RPI boiling model, has made it the primary candidate for mechanistic modeling ventures. Mechanistic modeling of D is mostly carried out through solving of force balance equations on the bubble. Forces incorporated in these equations are formulated as functions of the radius of the bubble and have been developed for, and applied to, low-pressure conditions only. Conversely, for high-pressure conditions, no mechanistic information is available regarding the growth rates of bubbles and the forces acting on them. In this study, we use direct numerical simulation coupled with an interface tracking method to simulate bubble growth under high (up to 45 bar) pressure, to obtain the kind of mechanistic information required for an RPI-type approach. In this study, we compare the resulting bubble growth rate curves with predictions made with existing experimental data.

• KSBB Journal
• /
• 제7권1호
• /
• pp.59-65
• /
• 1992

외부 순환식 공기리프트 반응기에서 기상유속과 액상의 점도를 변수로 하여 기체체류량과 액체의 순환시간, 혼합시간, 순환속도 및 축방향분산계수를 측정하여 다음과 같은 결론을 얻었다. 1. 기체체류량은 기체유속이 증가함에 따라 증가 하였으며, 점도가 증가함에 따라서는 약간 감소하는 경향을 보였다. 또 기체유속이 증가함에 따라 상승관에서는 기체체류량의 증가율이 감소한 반면 하강관에서는 증가하였다. 2. 기체유속이 증가함에 따라 순환시간 및 혼합시간은 초기에 급격히 짧아지다가 거의 일정한 값을 나타내었으며, 액체의 점도가 증가함에 따라 순환기산과 혼합시간은 모두 증가하였다. 3. 순환 액체의 속도는 기체의 속도에 따라 초기에 급격히 증가하나 기체속도가 약 5cm/sec이상이 되면 그 증가율이 매우 둔화되었으며, 점도가 증가함에 따라 약간 감소함을 알 수 있었다. 또한 압력수지식으로 예측한 이론값과 실험값은 낮은 기체유속 영역에서는 잘 일치하였으나 기체유속이 증가함에 따라 실험값이 이론값보다 작은 값을 나타내었다. 4. 기체유속이 증가함에 따라 Bodenstein number는 감소하였고, 축방향분산계수는 증가하였으며, 점도가 증가함에 따라 약간 감소하는 경향을 보였다. 본 실험범위에서 분산이 많이 일어나mixed folw에 근접함을 알 수 있었다.

• 설비공학논문집
• /
• 제29권5호
• /
• pp.259-268
• /
• 2017

This paper proposes a hydrogen-based social economy derived from fuel cells capable of replacing fossil fuels and resolving global warming, It thus provides an entry for developing economically feasible social configurations to make use of bio-hydrogen production systems. Bio-hydrogen production works from the principle that microorganisms decompose water in the process of converting CO to $CO_2$, thereby producing hydrogen. This study parts from an analysis of an existing 157-ton class NA1 bio-hydrogen reactor that identifies the state of feedstock and reactor conditions. Based on this analysis, we designed a 1-ton class bio-hydrogen reactor process simulator. We carried out thermal analyses of biological heat reactions, sensible heat, and heat radiation in order to calculate the thermal load of each system element. The reactor temperature changes were determined by modeling the feed mixing tank capacity, heat exchange, and heat storage tank. An analysis was carried out to confirm the condition of the feed mixing tank, heat exchanger, heat storage tank capacity as well as the operating conditions of the system so as to maintain the target reactor temperature.

• Molecules and Cells
• /
• 제40권3호
• /
• pp.211-221
• /
• 2017

Transforming growth factor ${\beta}1$ $(TGF{\beta}1)/Smad4$ signaling plays a pivotal role in maintenance of the dynamic balance between bone formation and resorption. The microRNA miR-155 has been reported to exert a significant role in the differentiation of macrophage and dendritic cells. The goal of this study was to determine whether miR-155 regulates osteoclast differentiation through $TGF{\beta}1/Smad4$ signaling. Here, we present that $TGF{\beta}1$ elevated miR-155 levels during osteoclast differentiation through the stimulation of M-CSF and RANKL. Additionally, we found that silencing Smad4 attenuated the upregulation of miR-155 induced by $TGF{\beta}1$. The results of luciferase reporter experiments and ChIP assays demonstrated that $TGF{\beta}1$ promoted the binding of Smad4 to the miR-155 promoter at a site located in 454 bp from the transcription start site in vivo, further verifying that miR-155 is a transcriptional target of the $TGF{\beta}1/Smad4$ pathway. Subsequently, TRAP staining and qRT-PCR analysis revealed that silencing Smad4 impaired the $TGF{\beta}1$-mediated inhibition on osteoclast differentiation. Finally, we found that miR-155 may target SOCS1 and MITF to suppress osteoclast differentiation. Taken together, we provide the first evidence that $TGF{\beta}1/Smad4$ signaling affects osteoclast differentiation by regulation of miR-155 expression and the use of miR-155 as a potential therapeutic target for osteoclast-related diseases shows great promise.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.117-125
• /
• 2012

This paper presented the design of SRPS, ground function test, and the deployment test on a high speed taxi of KC-100 airplane. KAI has developed a spin recovery system in collaboration with Airborne Systems for KC-100 general aviation airplane. Spin mode analysis, rotary balance and forced oscillation tests were performed to obtain the rotational, dynamic derivatives in the preliminary design phase. Prior to the detailed design process of SRPS, approximations for initial estimation of design parameters- fineness ratio, parachute porosity, parachute canopy filling time, and deployment method- were considered. They were done based on the analytical disciplines such as aerodynamics, structures, and stability & control. SRPS consists of parachute, tractor rocket assembly for deployment, attach release mechanism (ARM) and cockpit control system. Before the installation of SRPS in KC-100 airplane, all the control functions of this system were demonstrated by using SBTB(System Breakout Test Box) in the laboratory. SBTB was used to confirm if it can detect faults, and simulate the firing of pyrotechnic devices that control the deployment and jettison of SRPS. Once confirmed normal operation of SRPS, deployment and jettison of parachute on the high speed taxiing were performed.

• The Journal of Korean Physical Therapy
• /
• 제29권5호
• /
• pp.246-254
• /
• 2017

Purpose: Previous studies have reported that action observation training has beneficial effects on enhancing the motor task, such as balance and gait functions. On the other hand, there have been few studies combined with action observation training and auditory feedback. The purpose of this study was to determine the effects of action observation training with auditory feedback on the gait function in stroke patients with hemiparesis Methods: A total of 24 inpatients with post-stroke hemiparesis were assigned randomly to either an experimental group 1 (EG 1, n=8), experiment group 2 (EG 2, n=8), control group (CG, n=8, EG 1). The EG 2 and CG watched video clip demonstrating three functional walking tasks with auditory feedback, without auditory feedback, and showing a landscape image, respectively. The exercise program consisted of 30 minutes, five times a week, for four weeks. The participants were measured to 10MWT (10 m walk test), 6MWT (6 minutes walking distance test), TUG (timed up and go test), DGI (dynamic gait index), time and steps of F8WT (figure-of-8 walk test). Results: In the intra-group comparison after the intervention, EG 1 and EG 2 showed a significantly different gait function (10MWT, 6MWT, DGI, TUG, F8WT) (p<0.05). In the inter-group comparison after intervention, EG 1 showed significant improvements in the entire gait parameters and EG 2 only showed significant improvement in DGI and TUG compared to CG (p<0.05). Conclusion: These findings show that action observation training with auditory feedback may be used beneficially for improving the gait function of stroke patients with hemiparesis.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1104-1111
• /
• 2017

본 연구는 호흡마사지법으로 생체에너지(기) 순환을 고찰하고자 하였다. 수 천 년 전부터 자연과의 조화를 통해 깨달음을 얻은 선조들은 자연호흡법으로 기에너지의 생성과 승강운동조절을 통하여 무병장수 하였으며, 춥고 배고픈 시절에 복부의 소중함을 체험한 할머니는 부드러운 약손으로 생명의 바다인 복부를 통해 질병을 치유해 주셨다. 이처럼 자연호흡과 할머니의 부드러운 약손의 감성인식 및 동양의학의 핵심내용인 기일원론(氣一元論)의 바탕으로 배꼽호흡테라피가 형성되었다. 자연호흡과 약손 마사지로 기에너지의 생성과 승강운동을 통하여 복부를 다스려 자연계와 인체내 외의 동태적 평형상태를 유지시킴으로써 몸과 마음의 변화를 가져와 자연스럽게 질병을 치유하여 신체의 항상성을 유지시켜주는 자연치유법이라 할 수 있다. 배꼽호흡테라피를 적극 활용될 수 있는 실무 확산의 계기를 마련하고, 이를 통해 과학적인 임상연구 실무적용에 널리 활용될 것으로 기대한다.