• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.24 no.2
• /
• pp.107-111
• /
• 2013

Objectives : We developed two-dimensional (2D) scanning videokyomography to evaluate the mucosal wave of whole vocal cords in real time to overcome the limit of preexisting stroboscopy and line scanning videokymography which could not evaluate it. Methods : We implemented a continuous light source with high brightness, a high-definition CMOS camera, and capture board for saving the data. We created the software program to analyze the image data from the system. The test of the functionality of the 2D scanning videokymography camera was performed in one of the authors (P.H.J 32 years old male). Vocal cord images were obtained during normal phonation and falsetto phonation. Images were obtained also during cough, diplophonia. Results : The system made it possible to measure objective parameters, including fundamental frequency, amplitude, regularity, mucosal wave, and phase difference, medial and lateral peak, opening versus closing duration related to vocal fold vibration. Simultaneously, it enabled analysis of the whole mucosal wave of the entire vocal fold in real time. 2D scanning videokymography was also effective for evaluating the dynamic status of the vocal fold when the subject phonated aperiodic voice. Conclusion : In conclusion, 2D scanning videokymography can support the analysis of the whole mucosal wave of the entire vocal cord with objective vocal parameters, overcoming the limitations of stroboscopy and previous line scanning videokymography techniques.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• Journal of Intelligence and Information Systems
• /
• v.19 no.1
• /
• pp.79-94
• /
• 2013

Recently, the high value added business is steadily growing in the culture and art area. To generated high value from a performance, the satisfaction of audience is necessary. The flow in a critical factor for satisfaction, and it should be induced from audience and measures. To evaluate interest and emotion of audience on contents, producers or investors need a kind of index for the measurement of the flow. But it is neither easy to define the flow quantitatively, nor to collect audience's reaction immediately. The previous studies of the group flow were evaluated by the sum of the average value of each person's reaction. The flow or "good feeling" from each audience was extracted from his face, especially, the change of his (or her) expression and body movement. But it was not easy to handle the large amount of real-time data from each sensor signals. And also it was difficult to set experimental devices, in terms of economic and environmental problems. Because, all participants should have their own personal sensor to check their physical signal. Also each camera should be located in front of their head to catch their looks. Therefore we need more simple system to analyze group flow. This study provides the method for measurement of audiences flow with group synchronization at same time and place. To measure the synchronization, we made real-time processing system using the Differential Image and Group Emotion Analysis (GEA) system. Differential Image was obtained from camera and by the previous frame was subtracted from present frame. So the movement variation on audience's reaction was obtained. And then we developed a program, GEX(Group Emotion Analysis), for flow judgment model. After the measurement of the audience's reaction, the synchronization is divided as Dynamic State Synchronization and Static State Synchronization. The Dynamic State Synchronization accompanies audience's active reaction, while the Static State Synchronization means to movement of audience. The Dynamic State Synchronization can be caused by the audience's surprise action such as scary, creepy or reversal scene. And the Static State Synchronization was triggered by impressed or sad scene. Therefore we showed them several short movies containing various scenes mentioned previously. And these kind of scenes made them sad, clap, and creepy, etc. To check the movement of audience, we defined the critical point, ${\alpha}$and ${\beta}$. Dynamic State Synchronization was meaningful when the movement value was over critical point ${\beta}$, while Static State Synchronization was effective under critical point ${\alpha}$. ${\beta}$ is made by audience' clapping movement of 10 teams in stead of using average number of movement. After checking the reactive movement of audience, the percentage(%) ratio was calculated from the division of "people having reaction" by "total people". Total 37 teams were made in "2012 Seoul DMC Culture Open" and they involved the experiments. First, they followed induction to clap by staff. Second, basic scene for neutralize emotion of audience. Third, flow scene was displayed to audience. Forth, the reversal scene was introduced. And then 24 teams of them were provided with amuse and creepy scenes. And the other 10 teams were exposed with the sad scene. There were clapping and laughing action of audience on the amuse scene with shaking their head or hid with closing eyes. And also the sad or touching scene made them silent. If the results were over about 80%, the group could be judged as the synchronization and the flow were achieved. As a result, the audience showed similar reactions about similar stimulation at same time and place. Once we get an additional normalization and experiment, we can obtain find the flow factor through the synchronization on a much bigger group and this should be useful for planning contents.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.155-164
• /
• 2018

Many malicious programs have been compressed or encrypted using various commercial packers to prevent reverse engineering, So malicious code analysts must decompress or decrypt them first. The OEP (Original Entry Point) is the address of the first instruction executed after returning the encrypted or compressed executable file back to the original binary state. Several unpackers, including PinDemonium, execute the packed file and keep tracks of the addresses until the OEP appears and find the OEP among the addresses. However, instead of finding exact one OEP, unpackers provide a relatively large set of OEP candidates and sometimes OEP is missing among candidates. In other words, existing unpackers have difficulty in finding the correct OEP. We have developed new tool which provides fewer OEP candidate sets by adding two methods based on the property of the OEP. In this paper, we propose two methods to provide fewer OEP candidate sets by using the property that the function call sequence and parameters are same between packed program and original program. First way is based on a function call. Programs written in the C/C++ language are compiled to translate languages into binary code. Compiler-specific system functions are added to the compiled program. After examining these functions, we have added a method that we suggest to PinDemonium to detect the unpacking work by matching the patterns of system functions that are called in packed programs and unpacked programs. Second way is based on parameters. The parameters include not only the user-entered inputs, but also the system inputs. We have added a method that we suggest to PinDemonium to find the OEP using the system parameters of a particular function in stack memory. OEP detection experiments were performed on sample programs packed by 16 commercial packers. We can reduce the OEP candidate by more than 40% on average compared to PinDemonium except 2 commercial packers which are can not be executed due to the anti-debugging technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.946-961
• /
• 2008

This study aims to provide guidelines on future policy for restructuring the scheme of aid programs associated with If small and medium-sized enterprises (i.e. SME) in Korea. For this purpose, we investigate an empirical dataset of recent aid programs deployed by Ministry of Information and Communication (i.e. MIC) for the last four years First, it is examined that the programs are practiced in accordance with their own policy objective by comparing matching samples between two groups such as program beneficiary and non-beneficiary companies. Second, positioning transition of programs within a same category is visualized in terms of two business portfolio analysis matrices. Third, an affiliation network matrix of (he programs is newly developed and then we attempt to analyze the programs relationship by the application of multidimensional scaling method to the affiliation network matrix. The empirical dataset is composed of two different kinds of corporate datasets. One is a corporate dataset of 8,994 beneficiary companies that are aided by MIC during the year of '03-'06. The other is also a corporate dataset of 18,354 non-beneficiary companies that have no records of the program supports during the years at all. Particularly, the matching samples of non-beneficiary companies are prepared in order to have comparable corporate age years (i.e. CAY) against beneficiary companies' CAY. Results show that; 1) up-to-date, the programs are properly assigned to IT SME conforming to their own policy objective; 2) however, as the year goes on, the following two distinct positioning transitions are revealed such as (1) both CAY and corporate sales (i.e. SAL) are increased simultaneously, (2) ratio of intangible assets (i.e. RIA) is decreased and ratio of operating gain to revenue (i.e. ROR) is increased. Hence, the role of the programs gets weakened with regard to providing seed money to technology innovation-typed IT SME so that a managerial adjustment of the programs is required consequently; 3) even though the model adequacy is not satisfactory through the analysis of multidimensional scaling method, the relationship of indirect-typed programs can relatively be stronger than that of direct-typed programs.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.2
• /
• pp.223-252
• /
• 2008

In this study, we attempt to propose a choice-based diffusion model with switching cost, which can be used to forecast the dynamic substitution and competition among previous and new products at both individual-level and aggregate level, especially when market data for new products is insufficient. Additionally, we apply the proposed model to the empirical case of substitution and competition among Analog Cable TV that represents previous fixed charged broadcasting service and Digital Cable TV and Internet Protocol TV (IPTV) that are new ones, verify the validities of our proposed model, and finally derive related empirical implications. For empirical application, we obtained data from survey conducted as follows. Survey was administered by Dongseo Research to 1,000 adults aging from 20 to 60 living in Seoul, Korea, in May of 2007, under the title of 'Demand analysis of next generation fixed interactive broadcasting services'. Conjoint survey modified as follows, was used. First, as the traditional approach in conjoint analysis, we extracted 16 hypothetical alternative cards from the orthogonal design using important attributes and levels of next generation interactive broadcasting services which were determined by previous literature review and experts' comments. Again, we divided 16 conjoint cards into 4 groups, and thus composed 4 choice sets with 4 alternatives each. Therefore, each respondent faces 4 different hypothetical choice situations. In addition to this, we added two ways of modification. First, we asked the respondents to include the status-quo broadcasting services they subscribe to, as another alternative in each choice set. As a result, respondents choose the most preferred alternative among 5 alternatives consisting of 1 alternative with current subscription and 4 hypothetical alternatives in 4 choice sets. Modification of traditional conjoint survey in this way enabled us to estimate the factors related to switching cost or switching threshold in addition to the effects of attributes. Also, by using both revealed preference data(1 alternative with current subscription) and stated preference data (4 hypothetical alternatives), additional advantages in terms of the estimation properties and more conservative and realistic forecast, can be achieved. Second, we asked the respondents to choose the most preferred alternative while considering their expected adoption timing or switching timing. Respondents are asked to report their expected adoption or switching timing among 14 half-year points after the introduction of next generation broadcasting services. As a result, for each respondent, 14 observations with 5 alternatives for each period, are obtained, which results in panel-type data. Finally, this panel-type data consisting of $4{\ast}14{\ast}1000=56000$observations is used for estimation of the individual-level consumer adoption model. From the results obtained by empirical application, in case of forecasting the demand of new products without considering existence of previous product(s) and(or) switching cost factors, it is found that overestimated speed of diffusion at introductory stage or distorted predictions can be obtained, and as such, validities of our proposed model in which both existence of previous products and switching cost factors are properly considered, are verified. Also, it is found that proposed model can produce flexible patterns of market evolution depending on the degree of the effects of consumer preferences for the attributes of the alternatives on individual-level state transition, rather than following S-shaped curve assumed a priori. Empirically, it is found that in various scenarios with diverse combinations of prices, IPTV is more likely to take advantageous positions over Digital Cable TV in obtaining subscribers. Meanwhile, despite inferiorities in many technological attributes, Analog Cable TV, which is regarded as previous product in our analysis, is likely to be substituted by new services gradually rather than abruptly thanks to the advantage in low service charge and existence of high switching cost in fixed charged broadcasting service market.

• Information Systems Review
• /
• v.12 no.1
• /
• pp.189-207
• /
• 2010

We applied IT ecosystem analysis to Smart Grid system in this paper and thereby compared various arguments about Smart Grid technologies against the reality of the power generation and distribution in South Korea with a special attention to the power distribution side. Our work attempts to propose policy implications in the government-level based on a firm-level analysis using the framework of the competitive strategy and advantage. The Smart Grid initiative is expected to enhance the efficiency in the power generation and distribution. In addition, the Smart Grid initiative aims at capturing the opportunities in the electric power business such as parts, components, supplies, and system products in the global arena. Prerequisites of smart distribution system include building infrastructure based on smart distribution parts, information systems, communication technologies, and developing various application programs and interfaces that would interact with the consumers. Consumers are expected to play an integral role by changing their consumption patterns in response to dynamic pricing and quality choices enabled by the smart distribution technologies. In order to induce the consumers to participate actively in the program, firms and policy makers should consider providing consumers economic incentives and proper education for better understanding of new technologies. Our work helps policy makers and firm better understand the nature of technology and stakeholders for the successful implementation of smart distribution technologies.

• Journal of Korean Elementary Science Education
• /
• v.36 no.4
• /
• pp.379-393
• /
• 2017

This study analyzed the relationship between self-directedness of science-gifted elementary students and their expression of scientific creativity in science-gifted class. A science-gifted program on the topic of Hydraulic Machine was implemented to 34 fifth-graders in the Science-Gifted Education Center of an education office in Seoul, Korea for four weeks. The self-directedness of the gifted students was divided into three types of 'General, Scientific, and Topic-Related Self-Directedness'. The products of the students' activities were assessed by using a scientific creativity assessment formula. Qualitative research, such as analysis of observations and interviews, was also conducted in order to identify characteristics that were not apparently revealed by quantitative data. The main results of this study are as follows: First, science-gifted elementary students' general self-directedness and their scientific creativity were significantly correlated (r=.373). Second, the students' scientific self-directedness and scientific creativity did not have a significant correlation (r=.294). Third, there was a positive correlation between the students' topic-related self-directedness and their expression of scientific creativity. Their self-rated scores (r=.420) for the topic-related self-directedness and the number of activity types associated with the topic had a positive correlation (r=.350). Fourth, the students were categorized into four groups according to the levels of their self-directedness and scientific creativity, and the result showed that Type HH (high self-directedness and high scientific creativity) was the most common type (15 students, 38.5%), followed by Type LL (low self-directedness and low scientific creativity) (11 students, 28.2%). Eight (20.5%) and five students (12.8 %) belonged to Type LH (low self-directedness and high scientific creativity) and Type HL (high self-directedness and low scientific creativity) respectively. Fifth, the classroom observation of the students in groups revealed that groups with more number of Type HH demonstrated better cooperation and performance. Sixth, the analysis results of the observation were almost matched to the results of the self-directedness and scientific creativity tests. The students with higher self-directedness demonstrated active class participation and good cooperative skills. The students with higher scientific creativity had a tendency to generate creative ideas more frequently in given situations. Seventh, dynamic activities were perceived as enjoyable and exciting by 76.9% of the students, but static activities that require creativity were regarded as interesting only by 23.1% of the students. Among the students who were satisfied with both the creative and static activities, Type HH accounted for the largest proportion (55.6%). In conclusion, factors such as students' interests, initiatives, and attitudes displayed through voluntary participations originated from their own daily life can predict the degree of scientific creativity associated with the topic. Also, when students were categorized into four types according to the level of self-directedness and scientific creativity, there was a tendency of active behavior in class, cooperative skill, and activity satisfaction. This suggested that we should consider self-directedness and scientific creativity in selecting the gifted, grouping them in class, and designing and executing programs for science-gifted elementary students.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.168-178
• /
• 2012

The objective of this study is applied to office buildings to evaluate quantitative evaluation method about performance of double-skin at design stage to establish the basis for the purpose of evaluation performance. Select the evaluation building about design plan for applying the double-skin using the dynamic heat load analysis program the annual heating and cooling load of before and after the double-skin. Using CFD to analyze wind factor and applied ventilation for realistic results. Effects of double-skin to apply, and control techniques that can be done more realistically proposed through to set and control for shade control mode of ventilator and inside cavity wall of double-skin. Apply for the building the double-skin due to interpretation of the annual heating and cooling loads applied to interpret the quantitative effect confirmed the possibility. According to the form of a double skin was confirmed cavity environmental changes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.502-502
• /
• 2007

A catenary system should be designed to have an uniform elasticity over a span in order to maintain the lowest possible loss of contact between a pantograph and a contact wire. A elasticity uniformity of a catenary can be regarded as a important design factor used for predicting the current collection performance for a catenary. There are a couple of formulas to calculate the degree of elasticity uniformity of a catenary according to the literature survey. The effectiveness of these formulas is reviewed by performing catenary elasticity and loss of contact analysis for various different configurations of catenary systems using a beam element based FEM program. The results reveals that these formulas are not suitable to predict the current collection performance for a catenary. Therefore, a new formula based on the standard deviation of the elasticity over a span is proposed in this study. The analysis results show that the new formula for an elasticity uniformity of a catenary is very effective in predicting the current collection performance for a catenary.