• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2004

Self-potential and electrical resistivity methods were conducted for locating the auriferous mineralized zone, called Jija Vein, of Sambo mine, Limsu-ri, Haeje-myeon, Muahn-gun, Jeollanam-do. The host rocks of the mineralization include gneiss, rhyolite and felsic dyke. Ore vein is mainly fissured-filling type and sulfide minerals, such as pyrite, are disseminated in country rock. By the electrical responses from SP and surface resistivity methods., the mineralized zone is supposed to extend about 360 m directed N5W with the width of 20 m to 30 m. From resistivity tomograms using inclined borehole to surface, the ore body shape is interpreted as the width of 20 m in depth 40 m to 50 m.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.10-17
• /
• 2003

In this paper, genetic algorithm (GA)-based Thin Film Bulk Acoustic Resonator (FBAR) RF filter design technique is proposed. Since the BVD(Butterworth-Van Dyke) lumped element model is valid only around the resonance, FBAR filter design technique based on BVD circuit has an approximate error. Instead of using BVD model, optimizing filter design method utilizes an analytical electrical impedance equation of FBAR. The geometry of FBAR such as thickness of the piezoelectric layer and area which significantly affect the filter response is optimized by GA. US-PCS Rx Bandpass filter obtained by the proposed technique shows a better response comparing with the typical and BVD-based filter.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1221-1245
• /
• 2014

Real-time hybrid simulation (RTHS) is a promising cyber-physical technique used in the experimental evaluation of civil infrastructure systems subject to dynamic loading. In RTHS, the response of a structural system is simulated by partitioning it into physical and numerical substructures, and coupling at the interface is achieved by enforcing equilibrium and compatibility in real-time. The choice of partitioning parameters will influence the overall success of the experiment. In addition, due to the dynamics of the transfer system, communication and computation delays, the feedback force signals are dependent on the system state subject to delay. Thus, the transfer system dynamics must be accommodated by appropriate actuator controllers. In light of this, guidelines should be established to facilitate successful RTHS and clearly specify: (i) the minimum requirements of the transfer system control, (ii) the minimum required sampling frequency, and (iii) the most effective ways to stabilize an unstable simulation due to the limitations of the available transfer system. The objective of this paper is to establish a stability switch criterion due to systematic experimental errors. The RTHS stability switch criterion will provide a basis for the partitioning and design of successful RTHS.

• Journal of the Korean earth science society
• /
• v.29 no.5
• /
• pp.386-395
• /
• 2008

The absolute age of lapilli tuff in sedimentary formation that contains dinosaur fossils in the Boseong area, Korea was determined radiometrically against volcanic rocks below and above the fossil-bearing horizons. The sanidine in the lapilli tuff below the fossil-bearing horizon (Seonso formation) has an $^{40}Ar-^{39}Ar$ age of $81.l{\pm}1.4Ma$. The Pilbong tuff above Seonso formation has an $^{40}Ar-^{39}Ar$ age of $81.0{\pm}2.4Ma$. An andesite dyke intruding all sedimentary units yields an $^{40}Ar-^{39}Ar$ age of $42.4{\pm}2.5Ma$. Thus 81 Ma age can be regarded as the best estimate for the age of the Seonso Formation and the associated the dinosaur eggs. This age correlates well with dinosaur fossil finds in the Haenam and Koseong regions of Korea. The occurrence of dinosaur eggs and clutches attests to the existence of dinosaurs in southern Korea at least inCampanian times.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.1-8
• /
• 1995

The smectite-rich clays were found locally in Paleozoic calcareous sedimentary rocks in the Samcheok area. Their occurrences were investigated in detail, and the physico-chemical properties of the clays were also determined by X-ray diffraction, chemical analysis, thermal analysis and cation exchanging experiment. The smectite clays occur as the fissure filling dyke developed in calcareous sedimentary rock and as alteration products of intrusive rhyolite. Most of clays occur at the contact between the sedimentary rock and the rhyolite, and the alteration zone was observed only in rhyolite body close to the contact. Judging from their occurrences, it is believed that the smectite-rich clays in this area were formed by the hydrothemal alteration. The smectite clays from the area are mainly composed of Ca-montmorillonite, and associated with small quantities of quartz, opal-CT and feldspar. The montmorillonites from this area are lower in Fe content, and higher in exchangeable Ca ion, compared to those of bentonite from the Yangnam-Yeongil area.

• 한국해양학회지
• /
• v.11 no.1
• /
• pp.9-17
• /
• 1976

Multispectral scanner data collected by LANDSAT-1 over the mid West Sea of Korea were analyzed and interpreted for delineation of coastal features and turbidity distribution patterns during different portions of the tidal cycle. Imagery from two successful LANDSAT-1 overpasses of the area in October 1972 and in October 1973 had been used to prepare schematic maps of coastal features and turbidity distributions. Color composite imagery of LANDSAT MSS 4, 5 and 7 gave the best representation of shorelines, coastlines and tidal flats. MSS 5 imagery was most effective in differentiating relative turbidity levels through density slicing techniques. Referring to the tidal power development of Garolim Bay, the basin area measurements assuming dyke construction at the bay entrance, have been carried out on the coastal reature maps comiled from LANDSAT imagery, and those results were correlated with existing data. General areal patterns of surface turbidity distribution in the study area revealed close similarity with bathymetry of the area. Synoptic circulation patterns were also well discriminated from the LANDSAT imagery using the suspended sediment as a tracer.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.349-360
• /
• 1998

The alkali granite occurred as small stock and dyke is distributed in the Kyeomyeongsan Formation in the vicinity of the Chungju city. Geochemical characteristics in major and trace element of alkali granite in the Kyeomyeongsan Formation indicate that the alkali granites are peralkaline and have similar geochemical features to the A-type alkali granite. The rock enriched in HFSE such as Zr, Nb, Y, REE etc. According to the discrimination diagram the alkali granites mostly belong to the within-plate granite field, and to the $A_1$ group of A-type granite. This suggests that they might be emplaced in a extentional rift environment. The alkali granites are characterized by remarkably high total REE content, and enriched, relatively flat to somewhat HREE-depleted patterns with large negative Eu anomaly. The Sm-Nd age of the alkali granite is $338{\pm}30Ma$ with ${\varepsilon}_{Nd(t)}$ beings -7.3 to -8.5. On the basis of the geochemical studies the source magma was derived from a enriched mantle-like source and had a few or clearly interaction with sialic continental crust. In conclusion, the alkali granitic rock of the Kyeomyeongsan Formation might be formed from the high F peralkaline magma that was emplaced in continental rift environment, and generated at the early Carboniferous.

• KCID journal
• /
• v.21 no.1
• /
• pp.118-126
• /
• 2014

In this study, the use of the spur of riverbank technique is being investigated. The spur of the riverbank typically reduces the velocity of flow and protects the embankments by increasing friction along the water and the banks. This also has an effect in the rise of water level upstream. It is also used for the rectification of riverside line and restoration of the waterway through sedimentation near the spur of the riverbank. In this study, physical-scaled experiments are conducted to investigate the process of creating a mild meandering channel using the spur of the riverbank with varying water flows and sedimentation functions. The hydraulics observations are taken with respect to the varying heights and length of the riverbank's spurs and the distance between each spur for the formation of the mild meandering channel. It is observed that for 1.06 times of the meander length, it requires 2 times of the interval with each spur of river width. Similarly, 1.25L times of the meander length, it requires 0.5 times of the interval with each spur of river width. The sand accumulation is induced by the spur of riverbank when the spur of riverbank's heights are more than 40% of water depth and the length of the spur of riverbank needs under than 20% of river width for avoid exaggerated sand accumulation in the center of channel.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.289-296
• /
• 2002

Using results obtained from field surveys in the outflow region of the Keum River in winter (February 22), spring (May 9), summer (July 31) and autumn (October 17) in 2000, it was described the nutrient front relating to the hydrography. It showed that the horizontal gradients was sharp in the distributions not only in salinity but also in nutrients in the region of the mouth of estuary far away about 20 km from the dyke of the Keum River during the year. The two layer structure was a ubiquitous feature in the inner estuarine side of the region showing the maximum horizontal gradients in salinity and nutrients. Although the absolute values in salinity and nutrient concentrations were distinguished by season, the nutrient front seperates the saltier and nutrients poor water in the open sea from the brackish and nutrients rich water of the plume. These results suggest that the nutrient front coincides with the esturine front in the region of freshwater influence (ROFI) of the Keum River.

• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.139-150
• /
• 2013

Fast fashion companies have generated enormous amounts of clothing and large quantities of unsold or short-lived clothing end up in the landfill. As if to counter fast fashion, sustainable fashion has arisen for environmentally friendly garments at different levels from the fiber stage to production stage. However it is still fraught with uncertainty of systems in the industry. Therefore, this study proposed a system to create re-valued clothing from recycled garments for retailers. The target companies are large-sized retailers like Levi's, Polo, Gap, or J-Crew which are consistently producing basic items such as Levi's 501 or Classic Polo shirts with middle-prices. At the material stage, this study recommended additional requirements of designing a garment with a long life cycle based on criteria of an ideal garment developed by Patagonia clothing company. Then, this study explored innovative ways that retailers might connect with consumers to allow direct interaction between them in terms of the process of collecting used clothes. Using recycled clothing as a source material, this study strove to offer a process of redesign where the concept of 'waste to fashion' is developed as reconstructions where old forms are transformed into new ones.