• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• 환경위생공학
• /
• 제17권4호
• /
• pp.29-38
• /
• 2002

Advanced oxidation of wastewater was studied with a purpose to remove TOC and color by the ozone-assisted Fenton reaction. The optimal conditions were determined by hydrogen peroxide and ozone concentrations. Experimental results indicate that the ozone treatment after Fentons process was found to provide very efficient removal efficiency in the process, avoiding the exclusive ozone treatment. The combined process of ozone in the Fenton oxidation respectively was increased removal efficiences of 10.7％ in comparison with exclusive Fenton oxidation. Also, the treatments of ozone after Fenton's oxidation respectively had increased the removal efficiences of 16.％. As a result, the treatment of ozone after Fentons oxidation had the best removal efficiency of approximately 96％. Removal efficiency of color was significantly increased as mush as 26％ by the advanced Fenton's oxidation in comparison with exclusive Fenton's oxidation. The removal efficiencies in the biological treatment using Bacillus subtilis after Fenton's oxidation and after Fenton's and ozone's oxidation were increased by 14％ and 19％ respectively. Although these combined Bacillus subtilis-assisted Fenton's oxidation was determined to be effective method to treat the dyeing wastewater in an economic point of view, the choice of wastewater treatment can be varied depending on water quality.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.136-139
• /
• 2004

The dyeing effluent is a highly colored stream containing unfixed dyes along with salts and auxiliary chemicals such as emulsifying agents. Moreover, Textile dying is a chemically intensive process and consumes large quantities of water. Difficulties in the effluent treatment arise from its non-degradable property by aerobic digestion.(omitted)

• 대한환경공학회지
• /
• 제31권9호
• /
• pp.765-774
• /
• 2009

섬유염색 및 가공산업은 용수요구량이 매우 높은 편이며 다양한 난분해성 염료의 사용으로 인해 폐수발생량의 기여도가 높은 전형적인 오염 유발 산업이다. 본 연구는 낙동강 수계에서 산업폐수 발생업체 중 섬유염색 및 가공 산업시설을 중심으로 SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN 그리고 TP와 같은 수질 항목에 대해서 발생원 단위 오염물질 배출 특성을 파악하고 발생원단위 부하량을 산출하기 위해 수행되었다. 각 산업을 대표하는 오염원 발생원단위의 산정을 위해 낙동강 수계에 산재한 섬유염색 및 가공업체 중 세 개 업체를 선정하였다. BOD 기준 유입수와 유출수에서의 원단위 값은 90%이상 감소하였지만 원수에서의 높은 유기물 부하량으로 인해 원단위값 자체는 섬유제조시설에서 얻어진 값과 유사하였다. 유수의 생분해도는 유출수에 비해 세배 가량 높게 나타났다. 건평, 제품생산량 및 원료사용량을 기준으로 한 주요 수질 항목 (SS, $BOD_5$, COD, TN and TP)에서 단위공정(본 연구에서 산정한 값)의 오염원 발생원단위 결과값이 통합공정(국립환 경과학원에서 산정한 값)의 오염원 발생원단위 결과 값과 유사하였지만 다른 인자를 기준으로 한 경우에는 커다란 차이를 보여주었다. 섬유염색 및 가공업체에서 도출된 오염원 발생원단위 인자는 낙동강 수질 오염총량제 도입과 함께 수질오염 부하량 처리비용을 산정 할 때 유용한 자료로 활용될 수 있으리라 기대된다. 이러한 오염원 발생부하량 도출과 함께 낙동강 수계에서의 효과적인 수질오염제어와 관리를 위해서는 각 산업별 폐수처리시설의 유출수로부터 다양한 형태의 수질오염항목을 특성화시킬 필요가 있다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.172-174
• /
• 2008

The study has attempted to compare the behavior of reactive, disperse and acid dyes when wastewater from these three kinds of typical dyestuffs were treated by chemical coagulation and NF membrane in pilot scale. Disperse dyeing wastewater showed the tendency of easier removal in TOC and COD and especially in color. This is probably due to low water-solubility of disperse dyes compared with reactive and acid dyes and is a positive result in terms of water reuse. Bio-kinetic constants, ${\mu}$max, $K_s$ of reactive, disperse and acid dyes were obtained, implying that their biodegradability are not significantly different.

• 수도
• /
• 통권25호
• /
• pp.60-73
• /
• 1981

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.57-67
• /
• 2002

염색산업은 공정특성상 다량의 증기와 고온수가 필요한 에너지 다소비 산업으로 원가절감에 의한 경쟁력 향상을 위해서는 에너지사용량 절감을 위한 노력이 절실히 요구되는 산업이다. 염색가공공정은 정련, 감량 등 처리공정을 통해 조업, 생산하고 있는데, 이 공정과정에서 다량의 폐수가 발생되고 있으며, 배출된 폐수는 각 공장의 저류조에 집수 되어 공동폐수처리장으로 방류된다.(중략)

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.73-73
• /
• 2003

• 청정기술
• /
• 제10권1호
• /
• pp.19-25
• /
• 2004

피혁을 제조하는 제혁공정 중 피혁의 기본적인 색상을 부여하는 염색공정에서는 가죽과 미결합되어 폐수로 유출되는 염료의 양이 30~50% 정도 발생되며 이는 환경적으로 많은 문제를 야기시키고 있어 적은양의 염료를 사용하여 염착성, 균염성, 침투성을 증대시킬 수 있는 기술이 요구되고 있다. 또한 일반적인 천연피혁의 염색견뢰도는 2~3등급 정도로 다소 미흡한 실정으로서 염색견뢰도의 개선 문제가 시급히 요구되고 있는 실정이다. 따라서 피혁의 염색공정에 초음파(Ultrasound)를 이용하여 염료의 사용량을 감소시키고도 원활한 침투효과를 이룰 수 있었으며, 이에 따라 폐수로 유출되는 염료의 양을 감소시켜 오탁도가 심함 피혁폐수로 인한 환경 문제를 감소시킬 수 있었으며 또한 염색견뢰도를 0.5등급 정도 향상시킬 수 있는 효과를 확인할 수 있었다.

• 한국환경보건학회지
• /
• 제30권3호
• /
• pp.185-190
• /
• 2004

Acute aquatic toxicity of effluents discharged from five dyeing plants in Gyeong-gi province were evaluated to assess whether the current Korean water quality standards(KWQS) could protect aquatic life. Chemical analyses of all parameters regulated under KWQS, except for E-coli, were also carried out to determine regulation compliance of the samples. All the effluent samples were satisfied with KWQS except for the color in only one sample. In acute Daphnia magna toxicity tests, significant mortality was observed in one of five samples and EC50 was 12.1%(95% confidence interval 9.1-16.2), which was in compliance with KWQS. The result of the Microtox assay indicated that acute microbial toxicity existed in effluents from three out of five plants, two of which were in compliance with KWQS. The agreement between regulation compliance of chemical concentrations of effluent and observed toxicity from various biological toxicity tests was very poor to fair (kappa = 0.194~0.250). The data presented suggest that exposure to dyeing wastewater which were in compliance with Korean water quality standards may not be safe to aquatic biota, and multiple tropical levels should be considered in aquatic toxicity monitoring of dyeing industry.