• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• Journal of environmental and Sanitary engineering
• /
• v.17 no.4
• /
• pp.29-38
• /
• 2002

Advanced oxidation of wastewater was studied with a purpose to remove TOC and color by the ozone-assisted Fenton reaction. The optimal conditions were determined by hydrogen peroxide and ozone concentrations. Experimental results indicate that the ozone treatment after Fentons process was found to provide very efficient removal efficiency in the process, avoiding the exclusive ozone treatment. The combined process of ozone in the Fenton oxidation respectively was increased removal efficiences of 10.7％ in comparison with exclusive Fenton oxidation. Also, the treatments of ozone after Fenton's oxidation respectively had increased the removal efficiences of 16.％. As a result, the treatment of ozone after Fentons oxidation had the best removal efficiency of approximately 96％. Removal efficiency of color was significantly increased as mush as 26％ by the advanced Fenton's oxidation in comparison with exclusive Fenton's oxidation. The removal efficiencies in the biological treatment using Bacillus subtilis after Fenton's oxidation and after Fenton's and ozone's oxidation were increased by 14％ and 19％ respectively. Although these combined Bacillus subtilis-assisted Fenton's oxidation was determined to be effective method to treat the dyeing wastewater in an economic point of view, the choice of wastewater treatment can be varied depending on water quality.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.136-139
• /
• 2004

The dyeing effluent is a highly colored stream containing unfixed dyes along with salts and auxiliary chemicals such as emulsifying agents. Moreover, Textile dying is a chemically intensive process and consumes large quantities of water. Difficulties in the effluent treatment arise from its non-degradable property by aerobic digestion.(omitted)

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.765-774
• /
• 2009

Fiber Dyeing and Finishing facility has been recognized as an important pollution source due to its consumption of large volumes of water and chemicals. Unit mass discharge for the conventional water quality parameters such as flowrate, SS, $BOD_5,\;COD_{Mn},\;COD_{Cr}$, TN, TP were estimated. To represent the respective industries, three companies were carefully selected based on its manufacturing goods, flowrate and location at various unit operations and processes. More than 90% of decrease in unit mass estimation between influent and effluent of BOD was observed. But the values themselves were similar to those of Fiber Manufacturing facility due to the high loadings of organic matter. Biodegradability of influent was almost three times higher than that of effluent. Unit mass discharge estimations of unit process (estimated in this study) based on space, products and raw material were similar to those of composite process (estimated by National Institute of Environmental Research), while big difference was observed in the other factors. Unit mass discharge factors calculated in this study can be used as the reference for the estimation of water pollution loading costs in Nakdong river basin. For the effective water pollution control and management, it is essential to characterize the various types of water quality parameters from the effluents of individual industrial wastewater treatment plants.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.172-174
• /
• 2008

The study has attempted to compare the behavior of reactive, disperse and acid dyes when wastewater from these three kinds of typical dyestuffs were treated by chemical coagulation and NF membrane in pilot scale. Disperse dyeing wastewater showed the tendency of easier removal in TOC and COD and especially in color. This is probably due to low water-solubility of disperse dyes compared with reactive and acid dyes and is a positive result in terms of water reuse. Bio-kinetic constants, ${\mu}$max, $K_s$ of reactive, disperse and acid dyes were obtained, implying that their biodegradability are not significantly different.

• 수도
• /
• s.25
• /
• pp.60-73
• /
• 1981

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.57-67
• /
• 2002

염색산업은 공정특성상 다량의 증기와 고온수가 필요한 에너지 다소비 산업으로 원가절감에 의한 경쟁력 향상을 위해서는 에너지사용량 절감을 위한 노력이 절실히 요구되는 산업이다. 염색가공공정은 정련, 감량 등 처리공정을 통해 조업, 생산하고 있는데, 이 공정과정에서 다량의 폐수가 발생되고 있으며, 배출된 폐수는 각 공장의 저류조에 집수 되어 공동폐수처리장으로 방류된다.(중략)

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.73-73
• /
• 2003

• Clean Technology
• /
• v.10 no.1
• /
• pp.19-25
• /
• 2004

The leather was fixed with various colors through the dyeing process in leather manufacturing. During the dyeing process, the amount of 30~50% dyestuff which were not bonded with leather drained with waste water. These dyestuff raise lots of environmental problems, so technology for improving the fixing effect, levelling effect and penentration effect with the use of small amount of dyestuff has been required. Also, insufficient color fastness level 2~3 grade for common natural leather needs to be improved at the same time. Accordingly, the use of ultrasound(us) in dyeing process has decreased the amount of dyestuff and obtained the smooth permeability effect. So, we could find that the reduction of amount of dyestuff in wastewater led to decrease in environmental trouble caused by leather waste water with severe contamination degree and improved fastness up to 0.5 grades.

• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2004

Acute aquatic toxicity of effluents discharged from five dyeing plants in Gyeong-gi province were evaluated to assess whether the current Korean water quality standards(KWQS) could protect aquatic life. Chemical analyses of all parameters regulated under KWQS, except for E-coli, were also carried out to determine regulation compliance of the samples. All the effluent samples were satisfied with KWQS except for the color in only one sample. In acute Daphnia magna toxicity tests, significant mortality was observed in one of five samples and EC50 was 12.1%(95% confidence interval 9.1-16.2), which was in compliance with KWQS. The result of the Microtox assay indicated that acute microbial toxicity existed in effluents from three out of five plants, two of which were in compliance with KWQS. The agreement between regulation compliance of chemical concentrations of effluent and observed toxicity from various biological toxicity tests was very poor to fair (kappa = 0.194~0.250). The data presented suggest that exposure to dyeing wastewater which were in compliance with Korean water quality standards may not be safe to aquatic biota, and multiple tropical levels should be considered in aquatic toxicity monitoring of dyeing industry.