• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.45-46
• /
• 2009

In this study, 12 azo disperse dyes based on phthalimide were synthesized including their precursors. The chemical structures of the dyes and the corresponding precursors were analyzed by the GC-MASS, $^1H$ NMR spectra and elemental analysis. The dyeability on PET, such as step dyeing and build-up properties and color fastness were examined using conventional exhaust dyeing procedures.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.438-444
• /
• 2011

Bamboo leaves, as natural dye provide unartificial fresh green, are known for expert property at anti-bacterial, anti-aging, anti-oxidation, skin whitening, moisturizing, peeling of horny, deodorizing and some skin disease like as eczema and inflammation without any allergic response. Also, It is quite common to obtain bamboo leaves from our surrounding but most of them were not in use. On purpose of development the way of recycle with common material to dye, bamboo leaves were used to dye on ramie fiber which is valuable for both of apparel and industrial field and investigated their dyeing property. Using extract from bamboo leaves, dyeing property was examined with dyeability, colorimetric property, light fastness and wash fastness under different conditions by extract density, dyeing time, dyeing method and mordants. As results, dyeing was generally colored in yellowish, K/S Value was shown more higher on hemp fiber than ramie. The most optimum dyeing condition was investigated on pre-mordant treatment, dyeing temperature $60^{\circ}C$, dyeing time 30min and extract density 400%. On the treatment with mordant(Al, Fe, Cu), dyebility on both of hemp and ramie fiber were increased by mordant. Especially with Copper(Cu) as mordant, dyebility was highly increased than any other mordants and dyeings showed in deep color. Also on the fastness test which is the most important to natural dyeing, wash-fastness showed good performance with 4-5 grade but light-fastness was above 4 grade on both of hemp and ramie fiber, lower than wash-fastness overall.

• The Korean Journal of Community Living Science
• /
• v.22 no.1
• /
• pp.77-94
• /
• 2011

It is not clear to assume the history of dyeing by persimmon juice without an early knowledge of an accurate record. However, the beginning of persimmon dyeing in Korea is estimated to be around the $13^th$-$14^th$ century, even though there are no supporting records. On the other hand, there are definite records of persimmon dyeing in Japan from around the 17th century. Persimmon juice was originally used for fishing tools in both Korea and Japan, but upon entering the Modern Era it eventually transfigured into a dye for fabric. In Korea, persimmon-dyed fabrics were used for traditional clothing until it also became a popular choice for modern clothes in the 1990s. In Japan, persimmon juice was originally used for varnishing surfaces of household items, but it recently became a material for arts, crafts, and even apparels. The main difference between persimmon dyeing of the two countries is the presence and absence of the fermentation process. In Korea, persimmons are picked and water is immediately added to its juice to produce the dye. In contrast, Japan produces a fermented persimmon dye. As a result, in Korea the dye can not be preserved for long periods, whilst in Japan it is matured in the storage for 2-3 years. Today's pursuit of eco-friendliness and wellness has prompted an inclination towards natural material clothes. Therefore, it is necessary for both countries to push scientific research into improving the storage methods and colorfastness of persimmon-dyed products for the increase of use consumption in other areas of persimmon and arrowroot dyed fabrics, and the development of environment friendly materials.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.5
• /
• pp.911-921
• /
• 1997

Recently the interest in natural dyeing has been increased because of the color clarity, natural grace and reactionism in fashion. Indigo dyeing, safflower dyeing and Gal-ott in Cheju-Do become generally known, so the study about the natural dyeing is continued with national intrust and support. In this study, 1 used artemisia for various dyeing tests because we can get it easily. 1 tested the dyeability in wool as well as cotton and silk with wormwood in natural dyeing material. I also dyed nylon with the same material for the comparison of the molecular structure. The mercerization and the chitosan treatment were done in cotton to improve the low dyeability in the natural dyeing. The result of this study are as follows; We have to dye repeatedly to get deep color in natural dyeing, and mordant treatment brought good result in color difference and dyeing fastness. 1. Compared with silk, wool and nylon, the dyeability of cotton was the worse. The color difference of cotton was 18.81 without mordants , and 24.05 with mordant. The dyeability of cotton was much increased by mordants such as potassiumdichromate, copper sulfate, iron sulfate and salt water. The color of cotton was turned into yellow-green in potassium dichromate and yellow-green with deep green in copper sulfate. The mercerization and the chitosan treatment of cotton made the improvement in color, dyeability, laundering fastness, abrasion fastness. 2. The color difference of silk was 3 times as high as cotton. It showed the similar degree with the chitosan treated-cotton. That is to say, silk had good dyeability because it contains amino group and carboxyl group. The dyebility of silk was increased by a mordant such as iron sulfate, potassium dichromate and salt water, Drycleaning fastness showed 5 grade, abrasion-fastness was high over 4~5 grade and sunlight fastness showed 1 grade in all case. 3. The color difference of wool was the best among four fabrics because of 18 kinds of amino acids. It is considered that the sulfate of wool has the polarity and help metal- mordants get the better dyeability such as potassium dichromate, iron sulfate, copper sulfate, and aluminum chloride. The color was reddish-green in potassium dichromate, yellow.greenin iron sulfate and copper sulfate, and yellow in the rest mordants. Drycleaning fastness of wool showed over 4~5 grade, abrasion fastness 5 grade. Sunlight-fastness 1 grade. 4. The dyeability of nylon was almost same because of the similar molecular structure with silk. The clarity of color was poor. The color was yellow-green in copper sulfate and yellow in the rest mordants. Laundering fastness and abrasion-fastness of nylon was good. Sunlight- fastness represented 1 grade.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.55-55
• /
• 2012

To improve the deodorizing and antibacterial performance of various fabrics (cotton, silk and wool) dyed with pomegranate(Punica granatum L.) extract without mordants, natural colorant solutions, which were extracted from pomegranate using water as an extractant at $90^{\circ}C$ for 90 min with a various liquor ratio (solid natural colorant material/solvent water, weight ratio) from 1:100 to 1:5 were used. To achieve the highest K/S and the deodorizing and antibacterial performance, the best liquor ratio, dyeing bath ratio, dyeing temperature and dyeing time were found to be 1:10, 1:50, $80^{\circ}C$ and 60 min, respectively. The deodorizing performance of dyed cotton, silk and wool fabrics against acetic acid vapor were found to be95,70,90%,respectively. However, all the dyed fabrics displayed outstanding deodorizing performance(99%) against ammonia gas and antibacterial performance(bacteriostatic reduction rate:99.9%) against Staphylococcu aureus and Klebsiella pneumonia(bacteriostatic reduction rate: 99.9%). It is worth noting that pomegranate (Punica granatum L.) colorants notably enhanced the deodorizing and antibacterial performance of cotton, silk and wool fabrics.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.234-240
• /
• 2022

Use of processed timber can help reduce environmental damage and the economic burden of resources (important problems with use of raw timber) and can meet the needs of various fields where the sensibility of raw timber is required. Veneer wood is positioned as a high-value-added product due to its luxury and beauty, and it is used in various fields as a building-related material, such as interior decoration, furniture, flooring, building interior materials, and lumber. Dyeing is necessary to enhance the aesthetic appearance of this pattern and to expand its use. Therefore, in this study, we compared and analyzed the dye ability of oak-patterned materials with reactive dyes, and evaluated their performance as interior materials. As a result, the oak pattern was dyed with 9 kinds of reactive dyes and a comparative analysis was performed. The most suitable conditions are 50℃, 2 hours, and 0.5% o.w.f. In addition, evaluating resilience to daylight, resilience to rubbing, fire resistance, and flame retardance, yielded results suitable for use as an interior material. In this study, the dyeability of veneer dyed under various conditions using reactive dyes was compared and analyzed the performance as an interior material was evaluated.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2017

Blended knit with two or more fiber has various dyeing characteristics depending on dyeing method because of different material properties of them. In this paper, newly developed blended knit was used. It was composed by Acrylate fiber and Dyeable polypropylene(DPP) fiber. As result of build-up dyeing test, acid dyes and disperse dyes respectively had good dyeabilities on 1% o.w.f. with Acrylate fiber and DPP fiber. Compatibility of trichromatic of disperse dyes was generally good for most dyes investigated and their critical absorption range were between $120^{\circ}C$ and $130^{\circ}C$. As depending on dyeing methods, there were many differences in dyeability. It was confirmed that 1-bath-1-step dyeing was most suitable when considering dye exhaustion yield and levelling property. Wash, rubbing and light fastness of knits were generally good in most dyes.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.79-87
• /
• 2014

Dyeing fabric weaved with two or more kinds of fiber in different section has various dyeing interactions caused by different material properties of them. Newly developed knit fabric was used in this study. It composited by two different blocks, each block is included PET fiber and CDP fiber separately. Build-up properties with cation dyes and disperse dyes were good having average 83% of dyeing exhaustion yield on 5% o.w.f. dye concentration. As depending on dyeing methods, there were not showed direct interaction between cation dyes and disperse dyes. This result could be considered their different dyeing mechanism. Compatibility was best in S-type disperse dyes investigated their critical absorption range as $120^{\circ}C{\sim}130^{\circ}C$. Wash fastness was generally good in most dye.

• Journal of Fashion Business
• /
• v.23 no.4
• /
• pp.100-111
• /
• 2019

In this study, the dyeing properties and functionalities of Crataegi fructus extract were investigated for the purpose of application to new natural dye resources. The effects of dyeing conditions(concentration of dye, dye bath temperature, dyeing duration and dye bath pH) and mordanting on dye uptake and color changes were also examined. The study also estimated the colorfastness, antibacterial properties, and ultraviolet protection properties of the dyed and mordanted silk fabrics. The dye uptake increased in tandem with the dye concentration and dye bath temperature. The highest K/S values were obtained at the following conditions: a dye concentration of 100%(v/v), a dyeing period of 60 minutes, a dye bath temperature of $90^{\circ}C$, and a dyeing pH of 3. The colorfastness of the material when dry cleaned or rubbed ranged from good to excellent and fastness to light was rated at grade 2-3. The change in the color grade when exposed to washing was not good; however, the stain of washing fastness was good at a range of 4-5. In regards to the functional property aspects, the dyed and mordanted fabrics exhibited excellent results with a 99.9% reduction rate, and excellent ultraviolet protection factors.