• The Research Journal of the Costume Culture
• /
• v.16 no.1
• /
• pp.158-165
• /
• 2008

The purpose of this study was to investigate the dyeing property and ultraviolet-cut ability on silk 100% and nylon 100% fabrics dyed with Rhus verniciflua extracts. This study was investigated K/S values, surface color, washing fastness, dry cleaning fastness and ultraviolet-cut ability of the silk and nylon fabrics dyed with Rhus verniciflua extracts under the various dyeing conditions. As mordanting were used Tin(II) Chloride dihydrate $(SnCl_2{\cdot}2H_2O)$, Copper(II) sulfate pentahydrate$(CuSO_5{\cdot}5H_2O)$, Iron(II)Chloride$(FeC_2{\cdot}4H_2O)$. pH was adjusted by sodium carbonate$(Na_2CO_3)$ and formic acid(HCOOH). The optimum dyeing temperature, dyeing time, and pH of the silk fabrics dyed with Rhus verniciflua extracts were $90^{\circ}C$, 100min, and in the nylon fabrics were $90^{\circ}C$, 45min. It were colored(munsell value) 6.4Y 7.5/4.1 in the silk fabrics and colored 4.3Y 6.6/5.9 in the nylon fabrics dyed with Rhus verniciflua extracts. Washing fastness and dry-cleaning fastness in the silk and nylon fabrics dyed with mordanting agent improved in $4{\sim}5$ grade. UV-A test showed that nylon fabrics a high rate of 92% with Rhus verniciflua extracts.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.8-13
• /
• 2004

This research aimed at scrutinizing the comparative dyeability of some disperse dyes at low temperature on ultra-microfiber polyester, islands in the sea type (0.05 denier), which has claimed utmost fastness and improved uptake of dyeing. Comparisons of dyeability, such as rate of dyeing and color depth, on ultra-microfiber polyester were evaluated by H.T. exhaust dyeing method and followed by the test of rubbing fastness. To achieve high wet fastness, some commercial disperse dyes, Terasil WW and Megacron dyes, which have been recently launched for excellent wash fastness, have been examined compared with conventional disperse dyes, C.I Disperse Red 167 and C.I Disperse Orange 30.

• Fashion & Textile Research Journal
• /
• v.4 no.4
• /
• pp.394-398
• /
• 2002

The purse of this study was to invesigate the dyeing fastness on extract of bufferbur leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion (dry/wet), perspiration (acid/alkali), light, iron fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows : In the C.C.M test on mordanting method and kind of fabric, color difference of silk was three times higher than cotton. The silk fabric was the highest in simultaneous mordant treatment but cotton fabric was the highest in none mordant. In color difference analysis on 6 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially color difference of Fe and Cu mordanting treatment was higher than Cr, Sn, Al and none. In dyeing fastness on mordants laundering, perspiration, abrasion and iron fastness showed 4-5 grade but light-fastness showed 1-3 grade.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.176-184
• /
• 2003

This research aimed at scrutinizing the dyeability of some solvent dyes on polyester and their light fastness to be exploited as a breakthrough in light fastness where utmost fastness is required such as ultramicrofibers and industrial markets. Dyeability on polyester was mainly evaluated by HT exhaust dyeing according to the general procedure. Light fastness has been tested by a preliminary UV test followed by HT xenon test in compliance with standard SAE J1885, 224 KJ. Fading has been determined quantitatively by evaluating the shade deviation and the strength difference between unexposed and exposed samples by means of CIELab values.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.415-426
• /
• 2014

This study investigated the color change, enhancement of dye uptake, washing fastness, and light fastness of cotton and silk when dyed with Juniperus chinensis and Terminalia chebula (combination dyeing) using various methods. The dyeing methods were 1) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract sequentially (J-T), 2) dyeing Terminalia chebula Retzius extract and Juniperus chinensis extract sequentially (T-J), 3) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract simultaneously (J+T), and 4) dyeing Juniperus chinensis extract 4 times repeatedly and followed by a dyeing Terminalia chebula Retzius extract in sequence. In terms of increased dyeing uptake, combination dyeing (dyeing 2 times like method 1, 2, 3) had the same impact as the repeated dyeing (method 4). The color of J, T combination dyeing showed wide range of mixed YR series, Y series resulting from Terminalia chebula Retzius, and R series resulting from Juniperus chinensis. In cotton, J-T dyeing method showed superior enhancement of dye uptake, and T-J method in silk. In both of the cases, Y series color from Terminalia chebula Retzius extract was mainly shown (Y series color was superior to R series color after dyeing). Therefore, it is recommended for cotton to implement T-J method and for silk to implement J-T method in order to enhance both dyeing uptake and emphasize the color of R series. The K/S value of combination dyed fabrics was decreased by increasing washing time; however, the K/S value of combination dyed fabrics was increased by increasing UV irradiation time. But after repeated washing and longer UV irradiation, ${\Delta}E$ value of combination dyed fabric became smaller compared to fabric dyed with Juniperus chinensis only. Thus, it was found that after J, T combination dyeing, fabric became less prone to fading by washing and UV than after Juniperus chinensis single dyeing was done.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2004

The dyeings of cotton and silk fabric with Laurus tree extracts were investigated. The colorant was extracted with distilled water at $100^{\circ}C$ for lh. Dyeability(K/S), color fastness and antibacterial property of cotton and silk fabric were tested under conditions of various time, temperature, concentration, repeat-number of dyeing and mordants. The characteristics of dyeings Laurus extracts were figured out by K/S and CIELab values and color-fastness test was estimated in terms of wash fastness and light fastness. The maximum wavelength of spectrum was 670nm. The K/S value of cotton and silk fabric increased with increasing dyeing time and the exhaustion was saturated in 90min. Optical dyeing temperatures of cotton and silk fabrics were $60^{\circ}C$ and $80^{\circ}C$, respectively. The mordant effect on cotton fabric was achieved using Fe mordant. On the other hand, the mordant effect on silk fabric was obtained using Fe and Cu mordants. The wash fastness of cotton fabric was higher than that of silk fabric. Antibacterial property of silk dyeing was greater than that of cotton dyeing. In addition, the excellent antibacterial effect was imparted by Fe-post mordant method.

• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.23-34
• /
• 2019

The aim of this study is to explore the possibility utilizing Rhododedron brachycarpum as a new natural dye resource. It was dyed in silk fabric according to different dyeing conditions such as dye concentration, dye bath temperature, dyeing time and dye bath pH. The effect of the mordanting conditions were estimated as dyeability and color changes. Additionally, the colorfastness, antibacterial property, ultraviolet protection properties of the dyed and mordanted silk fabrics were examined. The water-soluble dye of Rhododedron brachycarpum extracted with distilled water was expressed as Yellow Red color. The dye-abilities of silk generally increased depending on the increasing values of dye concentration, dye bath temperature and dyeing duration. The highest K/S values were obtained at a dye concentration of 100% (v/v), a dye bath temperature of $90^{\circ}C$, a dyeing duration 120 minutes and a dyeing of pH 2. The light fastness of dyed and Cu mordanted silk fabrics were found to be 4 grade while Al, Fe mordanted silk fabrics were found to be 2~3 grade. The dry cleaning and rubbing fastness were excellent or good. The fade of washing fastness was not good, however, the stain of washing fastness was excellent. The dyed and Al, Cu mordanted silk fabrics indicated 99.9% reduction rate. The dyed and the mordanted fabrics showed very good ultraviolet protection factors.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.1-1
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at 95℃ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.30-34
• /
• 2006

Polypropylene fiber was dyed with 4 super hydrophobic dyes having different alkyl derivatives on the same chromophore. Double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDAB), was used to make dye-dispersant complex to improve the dispersion of dyes. As the alkyl groups are longer and the hydrophobicity is increased, the dyeability onto polypropylene fiber was improved and deep coloration was obtained. As for the fastness properties, wash fastness was relatively good, while light fastness was bit low.