• 한국생활과학회지
• /
• 제11권4호
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• 복식문화연구
• /
• 제23권5호
• /
• pp.768-777
• /
• 2015

In this study, the dyeing of silk fabric with Polygonum cuspidatum extracts was investigated. The contents of this study are as follows. First, the proper dyeing conditions were investigated by measuring the dye uptake (K/S value) that depended on the dyeing conditions when silk fabric was dyed with Polygonum cuspidatum extract. Second, the brightness (L), hue, and chroma differences that appear after mordanting with Al, Cu and Fe were investigated by measuring the CIELAB and Munsell values. And third, the colorfastness and antibacterial property were measured. When the silk fabric was dyed with Polygonum cuspidatum extract, the proper dyeing conditions were a colorant concentration of 90% v/v, a dyeing of time 100 minutes, a dyeing temperature of $70^{\circ}C$, and a dyeing of pH 3. In mordanting methods, the dyeabilities of post-mordanting were higher than those of premordanting. The hue value displayed yellow (Y) and yellow-red (YR) in cases of pre and post mordanting. The C value decreased by the mordanting of Polygonum cuspidatum extracts. Generally the colorfastness of mordanted fabrics was improved by mordanting. The dyed fabrics showed a 90.6% of Staphylococcus aureus reduction rate, and the dyed and mordanted fabrics showed 97.1% bacteria reduction rate. The dyed and mordanted fabrics showed above 90.5% Klebsiella pneumoniae reduction rate, and Cu mordant revealed the most effective bacterial reduction.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.496-501
• /
• 2009

In this study, a kiwifruit-produced protease was used to improve the quality of the wool and silk fabrics. The wool and silk were treated with the actinidin from kiwifruit. Following this protease treatment, changes in the surface of a single yarn of the fabrics were observed via both an optical microscope and a scanning electron microscope (SEM). In order to determine the amount of dye uptake in the fabric, changes in the K/S value of the wool and silk were measured by spectrophotometric analysis. Also, we performed a tensile strength examination to determine variation in their mechanical properties. By increasing the protease treatment time to 48h, the dyeing properties of fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, because of the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Thereby, we suggest that the kiwifruit-produced actinidin treatment can improve the quality of the fabrics.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.94-94
• /
• 2002

A number of studies have been introduced on the use of quaternary cationic agents having various reactive groups, which can improve the substantivity of anionic dyes, specially direct dyes, towards cotton. In the case of direct dyes, it is well known that they are widely used due to their convenience to apply and low cost, whilst they display poor levels of fastness properties to washing. Thus many applications using direct dyes in the textile fields have been still enjoyed in the areas where a higher level of wet fastness is specially not required. This work herein comprises that in order to improve the substantivity of direct dyes towards cotton, cellulose-reactive allylamine polymer namely, triazinyl N,N′-dimethyl-N,N′-diallyl ammonium chloride was prepared and treated onto cotton to provide cationic properties within substrates. This application showed that even low concentration of electrolytes being present, the direct dyes were exhausted well on the cationized cotton and that the rate of dye uptake by treated cotton was faster than that of untreated sample. Furthermore the antimicrobial properties were observed from the cationized samples.

• 한국의류학회지
• /
• 제35권10호
• /
• pp.1264-1270
• /
• 2011

This study is to optimize the conditions for the treatment of polyamide fabrics using laccase. The pH, temperature, treatment time, and concentration were varied; their effects were evaluated by measuring the number of primary amide groups by the uptake of an acid dye measured by K/S of dyed polyamide fibers. The hydrophilicity of the fabrics was evaluated in terms of moisture regain and wettability. The effects of the mediator, ABTS, on the laccase activity were also evaluated. The optimal treatment conditions were identified as a pH of 4.5, temperature of $30^{\circ}C$, treatment time of 6 hours, and concentration of 10% of the weight of the fabric (o.w.f.). ABTS facilitated the activity of laccase on the polyamide fabrics. Voids and cracks on the surfaces of the laccase-treated polyamide fabrics were responsible for improved wettability. The results proved that laccase treatment improved the hydrophilicity of polyamide fibers without decreasing their strength.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.11-19
• /
• 1998

For the purpose of standardization and practicability of dyeing by natural dyes, the mordanting and dyeing properties of cochineal and carminic acid were studied. Appropriate extraction, dyeing and mordanting condition of cochineal were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of cochineal solution was 495nm, carminic acid was 533nm and 577nm. The color of carminic acid solution was affected by pH 6~9. The optimum temperature to extract cochineal was $80-100^\circ{C}$ and dyeing solution for 1 hour. And effective dyeing time to silk was 60min. Effective mordanting temperature was $80^\circ{C}$, and its time was 30min. In case mordants concentration, the maximum absorbance of Sn solution was 3%, K, Cu and Cr were in 1%. K/S value of dyeing fabrics was recoginazed by mordant treatment, specially Fe, Sn, Al, Cu. In the case of cochineal light fastness was increased by mordant treatment, specially Fe treatment. Perspiration fastness was good in acidic solution than in alkaline solution and perspiration fastness of cochineal was poor. Fastness of abrasion and dry-cleaning were good and these fastness improvement were generally effective for post-mordanting treatment.

• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.237-241
• /
• 2014

The aim of this study is to develop an eco-friendly reduction process of indigo as an alternative choice. Hansenula misumaiensis was used and their reducing activity toward synthetic indigo as well as natural indigo was estimated by dyeing test in terms of indigo dye uptake. The changes in K/S value and pH were monitored on the time-based measurements. Also, reduction duration was evaluated. On the basis of the results described in this study, it was confirmed that Hansenula misumaiensis reduced indigo. Reducing power of Hansenula misumaiensis reached to maximum in two days. It can be possible to develop eco-friendly process of indigo reduction using Hansenula misumaiensis by the optimization of strain culture conditions and the optimization of reduction conditions.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.381-388
• /
• 2010

The purpose of this study was investigate the dyeing property on chitosan crosslinked cotton fabric with cochineal at variable conditions. Chitosan crosslinked cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Chitosan crosslinked cotton fabrics dyed using cochineal were post-mordanted using Al, Fe and Cu. The dyeability(K/S) of chitosan crosslinked cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of chitosan crosslinked cotton fabrics increased with the dyeing time. The saturated dyeing time was about 20minutes at $60^{\circ}C$. The dyeability(K/S) was remarkably increased with increasing content of crosslinked chitosan because of having a amine group of chitosan. Chitosan crosslinked cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing and light fastness were increased by mordanting, especially Cu and Fe mordanting.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.16-24
• /
• 1995

Traditionally dyeing fabric with dyestuff extracted from Indigo was a popular method of obtaining blue color in the world before synthetic dyestuff was developed in the 1890's. As the Korean traditional process of dyeing extracted from Indigo, there are two kinds of dyeing process; The deposite dyeing of muddy Indigo and the leaf dyeing of Indigo plant. In order to study the properties of leaf dyeing of Indigo, the dyeing properties, color difference on cotton and silk fabrics under several dyeing conditions were investigated. In the dyeing of cotton and silk fabrics with leaf dyeing of Indigo, the dyeing affinity of silk was higher than that of cotton, the cotton and silk fabrics were dyed dark yellowish Green and dark Blue, respectively. the dye uptake increased with the increase of dyeing temperature and of the unmber of dyeing times. When cotton and silk fabrics dyed with leaf dyeing of Indigo at 6$0^{\circ}C$ for six number of times, the K/S value of dyed cotton and silk were calculated 1.286, 2.613 respectively.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.132-139
• /
• 2003

PTT[Poly(trimethylene terephthalate)] fibers was annealed by passing on the plate heater to illuminate the effects of annealing on the alkaline hydrolysis behavior properties with varying the treatment temperature for 0.5 second. The L010 and crystallinity were increased with increases in temperature. With the increases of the temperature, the dynamic viscoelastic behaviors were analyzed to be reduction in $T_{max}(tan\;\delta)$. The weight loss in alkaline solution was two times more rapid for the PTT annealed at $200^\circ{C}$ than the control samples. The kinetics of hydrolysis was confirmed that the hydrolysis of the PTT fibers in the alkaline solution was started from the surface of the fibers and selective to the amorphous region in continuation, on the basis of the results of the increase in crystallinity and the decrease in dye uptake at the initial stage of the hydrolysis.